12-15 TPH Car Shell Crusher & Metal Hammer Mill | 1800mm Metal Crusher (PSX-560)

A standard passenger car measures 1,720–1,820 mm (68″–72″) wide—and even more after being flattened by a mobile car baler—making an 1,800 mm (71″) clear throat width the physical minimum for direct car-shell crushing. Manufactured by Huaxin Co., Ltd., the PSX-560 12-15 TPH scrap metal crusher is our entry-level automotive ELV hammer mill, combining an 1,800 mm (71″) hydraulic pre-compression chute with a 560 kW (750 HP) main drive and 75–90 kg (165–198 lb) ZGMn18Cr2Mo hammers. It turns depolluted car shells, light truck cabs, and mixed yard iron into 100–120 tons/day of clean 1.05–1.30 t/m³ crushed steel. Not Just for Car Shells—Complete Material Flexibility: Although its 1,800 mm (71″) throat is built to swallow flattened ELV car bodies whole, the PSX-560 is a full-spectrum scrap metal crushing machine. Using one standard grate screen (e.g., 70 mm / 2.8″ or 80 mm / 3.1″), it crushes commercial steel scrap, light scrap iron, white goods (refrigerators/washers), 200L metal drums, aluminum scrap castings, engine housings, and electric motors. When fed pre-sheared heavy scrap from our gantry shear, output rises by 20%–30%; when fed pre-ripped stock from an HX-DS1800 shredder, hourly tonnage jumps by 25%–40%.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

Why 1,800 mm (71″) Is the Threshold for Direct Car-Shell Crushing

Every week, scrap yard owners ask if they can feed flattened end-of-life vehicles (ELVs) into a 1,400 mm (55″) or 1,600 mm (63″) crusher. The geometry is unforgiving: a mid-size sedan body measures 1,750 mm (69″) across the B-pillars, and when a mobile car logger flattens the roof, the fenders splay outward to 1,780 mm (70″). Attempting to force that shell into a 1,600 mm (63″) chute requires torch-cutting every car in half lengthwise—destroying your labor margin.

The PSX-560 12-15 tph scrap metal crusher from Huaxin Co., Ltd. is purpose-built around a true 1,800 mm (71″) wide crushing chamber and apron conveyor. Depolluted passenger car shells (with engines, transmissions, fuel tanks, tires, and batteries removed) ride straight up the heavy chain-plate conveyor without lengthwise cutting. Dual hydraulic cylinders press the toothed upper feed roller down with 25 tons of clamping force, gripping the A/B/C pillars and feeding the car shell into the 560 kW (750 HP) hammer rotor in 45 to 65 seconds.

Not Just for Car Shells—Complete Material Flexibility: Although its 1,800 mm (71″) throat is built to swallow flattened ELV car bodies whole, the PSX-560 is a full-spectrum scrap metal crushing machine. Using one standard grate screen (e.g., 70 mm / 2.8″ or 80 mm / 3.1″), it crushes commercial steel scrap, light scrap iron, white goods (refrigerators/washers), 200L metal drums, aluminum scrap castings, engine housings, and electric motors. When fed pre-sheared heavy scrap from our Q91-630 Gantry Shear, output rises by 20%–30%; when fed pre-ripped stock from an HX-DS1800 Shredder, hourly tonnage jumps by 25%–40%.

ELV Car-Shell Preparation Checklist Before Feeding the PSX-560

Vehicle Component PSX-560 Direct Feeding Rule Engineering Reason
Flattened or Unflattened Sedan Hull (Doors, Roof, Floorpan, Bumpers) Feed Directly (up to 1,780 mm / 70″ width, ≤600 mm / 23.6″ flattened height) 75–90 kg (165–198 lb) hammers shear high-tensile B-pillars cleanly against the primary anvil
Dashboard Wiring, Seats, Glass & Interior Trim Can Remain Inside Hull (if air classifier + eddy-current line is installed) Suction cyclone pulls ASR foam/fluff; eddy-current separator recovers copper/aluminum Zorba
Engine Block, Gearbox & Solid Differential Axles Must Be Removed First Solid forged crankshafts and gear shafts (>45 mm / 1.8″ solid alloy) trigger the tramp-iron ejection door
Fuel Tank, LPG Cylinder, Battery & fluids Mandatory Depollution Required High-speed hammer impact generates sparks; residual gasoline vapors will cause chamber deflagration

PSX-560 (12–15 TPH / 1,800 mm Class) Technical Specifications

Specification PSX-560 Factory Standard
Model & Hourly Capacity PSX-560 (PSX560) | 12.0–15.0 TPH (95–120 tons per 8-hour shift)
Infeed Throat & Roller Opening 1,800 mm (71″) width × 650 mm (25.6″) hydraulic pre-press lift
Main Motor & Voltage 560 kW (750 HP) | 6 kV / 10 kV / 11 kV High-Voltage (or dual-motor / LRS low-voltage custom)
Rotor & Hammer Metallurgy Ø1,250 mm (Ø49.2″) capped disc rotor | 18–22 pcs ZGMn18Cr2Mo hammers (75–90 kg / 165–198 lb each)
Grate Screen Aperture & Density 45–100 mm (1.8″–3.9″) | Output crushed density: 1.05–1.30 t/m³ (65–81 lb/ft³)
Tramp-Iron & Pin Extraction Hydraulic ballistic tramp-iron ejection door + lateral hydraulic hammer pin puller
Containerized Dispatch & HS Code 3–4 × 40HQ Containers | Customs HS Code: 8479.8190 | 45–50 Day Delivery

Capped Rotor Disc Protection & Auto-Reversing Feeder Control

Crushing car shells exposes the rotor discs themselves—not just the hammer tips—to severe lateral wear as torn floorpans and frame rails wedge between adjacent hammers. On the PSX-560, Huaxin Co., Ltd. fits replaceable alloy protective caps and heavy spacer rings over the rotor discs so the forged 42CrMo main shaft and primary discs never suffer direct abrasion.

In the operator pulpit, our Siemens PLC load-tracking system monitors main motor current 20 times per second. When a dense rear-axle crossmember enters the anvil zone, the VFD apron conveyor automatically proportions its feed speed—or reverses 300 mm (12″) and re-feeds—allowing a single operator to run the 100-ton/day plant via four HD CCTV cameras.

Comparing Car-Shell Crushing Options

FAQ: PSX-560 (12–15 TPH) Car Shell Hammer Mill

1. Why do many yards place an HX-DS1800 dual-shaft shredder in front of the PSX-560?

Feeding whole flattened car shells directly into the PSX-560 works well, but adding a slow-speed HX-DS1800 Dual-Shaft Pre-Shredder upstream rips the car hull into 150–300 mm (6″–12″) strips first. This eliminates current spikes on the 560 kW hammer mill motor, prevents hidden gas-tank/battery explosions in the high-speed rotor, raises net output from 12 TPH to 16+ TPH, and nearly doubles Mn18Cr2 hammer life.

2. What non-ferrous recovery rate can we expect from ELV car shells?

When equipped with our optional air-suction classifier (to remove ASR seat foam and textiles), overband + drum magnetic separators, and high-frequency eddy-current separator, the PSX-560 line recovers 98%+ of ferrous steel and 92–95% of non-ferrous Zorba (cast aluminum brackets, radiator fins, copper starter wire, and zinc die-cast handles).

Get Your PSX-560 ELV Line Layout & FOB Quote: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Online Quote Request) for a tailored engineering proposal.

Additional information

Machine Type

Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series)

Model

PSX-560 (PSX560)

Hourly Capacity

12-15 TPH (95-120 tons/day (8-hour shift))

Inlet Width

1,800 mm

Main Motor Power

560 kW

Voltage System

380V/415V/440V Heavy VFD or 6kV/10kV/11kV High-Voltage

Output Fragment Size

50-100 mm standard (30-120 mm customizable)

Crushed Steel Density

1.10-1.35 t/m³

Hammer Material

Mn18Cr2 High-Manganese Cast Steel (75-90 kg per hammerhead (Mn18Cr2))

Maintenance System

Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt

Standard Line Equipment

VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control

Optional Systems

Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter

Warranty & Delivery

1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote