
20-25 TPH Car Body & ELV Scrap Metal Crusher | 2200mm Hammer Mill (PSX-900)
Feeding whole, unflattened sedans, SUVs, and light commercial vans directly into a hammer mill without a car logger requires a minimum 2,200 mm (87″) clear chamber width and massive upper-roller crushing force. Engineered by Huaxin Co., Ltd., the PSX-900 20-25 TPH scrap metal crusher combines a 2,200 mm (87″) twin-cylinder pre-compression throat with a 900 kW (1,200 HP) high-voltage main drive and 100–125 kg (220–275 lb) ZGMn18Cr2Mo alloy hammers. It processes 160–200 tons per 8-hour shift of whole depolluted vehicle hulls, loose light-scrap bales, and mixed HMS into 1.15–1.35 t/m³ EAF steelmaking charge. Multi-Stream Yard Versatility (2,200 mm / 87″ Throat): Beyond unflattened passenger cars and SUVs, the 900 kW PSX-900 serves as an all-purpose industrial metal crusher for loose light-iron bales, C&D steel scrap (up to 8 mm / 0.31″), household appliances, 200L steel drums, aluminum engine castings, and copper/motor scrap—all processed through one fixed grate screen size. Pre-cutting thick girders on a Q91 gantry shear adds 20%–30% to hourly output, while feeding pre-torn bales from an HX-DS dual-shaft shredder increases production by 25%–40%.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Direct Whole-Vehicle Feeding Without Pre-Flattening: The 2,200 mm (87″) Advantage
In a high-volume automotive dismantling yard processing 150 to 200 tons per day, pre-flattening every depolluted car shell in a separate baler adds an extra crane handling step, fuel cost, and cycle bottleneck. Yet an unflattened SUV or pickup cab measures up to 1,980 mm (78″) wide across the wheel arches and 1,550 mm (61″) tall.
To swallow whole depolluted vehicle hulls directly from the grapple crane, Huaxin Co., Ltd. engineered the PSX-900 20-25 tph scrap metal crusher around a commanding 2,200 mm (87″) wide crushing chamber and a dual-motor toothed hydraulic feed roller that opens to 850 mm (33.5″). As the inclined steel apron conveyor drives a whole car hull into the throat, 40 tons of hydraulic downforce crushes the roof pillars flat against the lower wear plate and meters the chassis steadily into the 900 kW (1,200 HP) rotor—crushing a complete passenger car hull in 30 to 42 seconds.
Multi-Stream Yard Versatility (2,200 mm / 87″ Throat): Beyond unflattened passenger cars and SUVs, the 900 kW PSX-900 serves as an all-purpose industrial metal crusher for loose light-iron bales, C&D steel scrap (up to 8 mm / 0.31″), household appliances, 200L steel drums, aluminum engine castings, and copper/motor scrap—all processed through one fixed grate screen size. Pre-cutting thick girders on a Q91-1000 Gantry Shear adds 20%–30% to hourly output, while feeding pre-torn bales from an HX-DS2200 Dual-Shaft Shredder increases production by 25%–40%.
PSX-900 (20–25 TPH / 2,200 mm Class) Engineering Specifications
| Engineering Parameter | PSX-900 Whole-Car Specification |
|---|---|
| Model & Hourly Capacity | PSX-900 (PSX900) | 20.0–25.0 TPH (160–200 tons per 8-hour shift) |
| Chamber Width & Roller Lift | 2,200 mm (87″) clear throat width × 850 mm (33.5″) hydraulic feed roll opening |
| Main High-Voltage Motor | 900 kW (~1,200 HP) | 6 kV / 6.6 kV / 10 kV / 11 kV (50/60 Hz) + VCB & Liquid Resistance Starter |
| Rotor Diameter & Hammer Weight | Ø1,500 mm (Ø59″) capped disc rotor | 22–26 pcs ZGMn18Cr2Mo hammers (100–125 kg / 220–275 lb each) |
| Grate Aperture & Output Density | 50–110 mm (2.0″–4.3″) grates | Finished ISRI 210/211 density: 1.15–1.35 t/m³ (72–84 lb/ft³) |
| Max Structural Plate Thickness | Up to 8.0 mm (0.31″) frame rails, whole unflattened ELV shells, light bales & white goods |
| Main Shaft & Safety Systems | 280 mm (11″) forged 42CrMo alloy shaft + hydraulic tramp-iron ejection door + hydraulic pin extractor |
| Ocean Freight & Customs Code | 4–5 × 40HQ/40OT Containers | HS Code: 8479.8190 | 50–60 Day Factory Lead Time |
Rotor Inertia & Tramp-Iron Defense When Crushing Whole Vehicles
Whole depolluted vehicles frequently hide unexpected heavy steel parts—trailer hitches, suspension control arms, leaf springs, or a forgotten wheel hub. If a 20 TPH crusher lacks rotor mass or an emergency relief path, a single leaf spring can wedge between the hammer tip and grate bar, causing hours of torch-cutting downtime.
- 100–125 kg (220–275 lb) Chromium-Molybdenum Manganese Hammers: The PSX-900 swings massive 100–125 kg hammers at a tip speed of ~52 m/s (170 ft/s). The kinetic energy stored in the Ø1,500 mm (Ø59″) capped rotor pulverizes automotive frame rails and control arms without motor stall.
- Ballistic Tramp-Iron Ejection Door: Mounted above the primary anvil beam, our hydraulically latched relief hood opens within 1.5 seconds when triggered by the operator or overload sensor, ejecting uncrushable solid shafts onto a reject chute safely.
- Heavy-Duty Chain-Plate Apron Feeder (10–12 m / 33–39 ft): Built with 20 mm (0.79″) stamped manganese steel pans and crawler-tractor grade chains driven by a planetary reducer and VFD, absorbing the impact of 1.2-ton vehicles dropped from an orange-peel grapple.
Comparing 2,200 mm (87″) Whole-Car Models & Pre-Shredder Combinations
- Flattened Car Shells Only (1,800 mm / 71″ Throat): PSX-630 (13–16 TPH, 630 kW).
- Higher-Torque 1,600 HP Same-Width Upgrade (2,200 mm / 87″ Throat): PSX-1200 (25–40 TPH, 1,200 kW) for denser bales and heavier HMS.
- Optional Upstream Twin-Shaft Pre-Shredder: Add an HX-DS2000 Dual-Shaft Shredder ahead of the PSX-900 to process un-depolluted/baled car logs at 25+ TPH, or browse our Scrap Metal Crusher Pillar Page.
FAQ: PSX-900 (20–25 TPH) Whole Car Body Hammer Mill
1. How many passenger cars per hour can the PSX-900 process?
Assuming a depolluted passenger car hull weighs 650–800 kg (1,430–1,760 lb), the PSX-900 processes 28 to 35 whole vehicle hulls per hour (roughly one car every 1.7 to 2 minutes including conveyor spacing), yielding 20–25 metric tons per hour of clean crushed steel plus 1.2–2.0 TPH of non-ferrous Zorba.
2. What civil foundation and yard area are needed for a complete PSX-900 plant?
A complete turnkey PSX-900 line—from the inclined apron feeder through the main hammer mill, vibrating pan, Z-box air classifier, pulse-jet baghouse, magnetic drums, and eddy-current Zorba sorting conveyors—occupies a footprint of approximately 42 m × 16 m (138 ft × 52 ft). Huaxin Co., Ltd. provides full civil foundation engineering drawings and dispatches engineers for on-site commissioning worldwide.
Request a Custom PSX-900 Plant Layout & Quote: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Page) for complete technical specifications and FOB/CIF pricing.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-900 (PSX900) |
| Hourly Capacity | 20-25 TPH (160-200 tons/day (8-hour shift)) |
| Inlet Width | 2,200 mm |
| Main Motor Power | 900 kW (High-Voltage 6kV / 10kV / 11kV) |
| Voltage System | 6kV / 6.6kV / 10kV / 11kV High-Voltage (3-Phase 50/60 Hz) |
| Output Fragment Size | 60-100 mm standard (40-120 mm customizable) |
| Crushed Steel Density | 1.20-1.45 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (95-115 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
Get A Free Quote
OEM Replacement Blades, Wear Liners, Sub-Zero (-40°C) Packages & Customs HS Codes
In addition to brand-new turnkey machinery backed by a 12-month factory warranty, HUAXIN manufactures and exports direct-fit OEM replacement blades, wear plates, high-manganese castings, and hydraulic cylinder assemblies—including custom-machined replacement blades built to your exact engineering drawings or sample dimensions. Standard wear parts ship within 5 business days, and custom-forged orders ship within a maximum of 20 days.
| Item / Component Category | Export Customs HS Code | Metallurgy & Engineering Options | Lead Time & Pricing Factors |
|---|---|---|---|
| Complete Host Machine | 8479.8190 | PSX High-Speed Scrap Metal Hammer Mill Crusher / Fragmentizer Line (CE & ISO9001 Certified, 100% New with Warranty) | 30-55 Days · EXW / FOB Tianjin / CIF / CFR / DDP |
| Primary Cutting / Crushing Wear Parts | 8479.9090 | Cast High-Manganese Mn13Cr2 / Mn18Cr2 Hammers, Anvils & Grate Bars · Precision ground to ±0.02 mm tolerance | 5 Days (Stock) / ≤20 Days (Custom) · Priced by steel grade, dimensions & order qty |
| Sub-Zero / Arctic Climate Package (-20°C to -40°C) | 8479.9090 / 8412.2100 | Deep cryogenic-treated impact blades (anti-fracture at -40°C), Parker low-temperature cylinder seals & oil tank heaters | Custom engineered for Russia, Canada, Nordic & Northern US yards · Contact for Quote |
| Hydraulic Cylinders & Seal Kits | 8412.2100 | Forged 42CrMo piston rods with 0.06-0.08 mm hard chrome plating + genuine Parker / Hallite / NOK seal kits | Seal Kits ≤5 Days / Cylinders ≤20 Days · Consolidated container or air express |
How Spare Parts Pricing is Calculated: Replacement blade, hammer, liner, and cylinder prices depend on (1) alloy grade requirement (M6V/H13/X45/D2 vs. Forged H13 vs. Cryogenic Sub-Zero Grade), (2) exact drawing dimensions & bolt pattern, (3) ambient operating temperature (-20°C to -40°C Arctic toughness vs. +50°C desert cooling), and (4) trade terms (EXW, FOB, CIF, or bundled duty-free inside your new machine container). Send us your machine model or blade drawing for a same-day factory quote →
