Showing 1–12 of 35 results
-
The Q43-200 is a 200 Ton hydraulic alligator shear for small yards, demolition crews and fabrication workshops cutting rebar, bar stock and light sections. No Foundation Needed: sits on a level surface and relocates when the job moves. Diesel-Ready: electric motor at your voltage, or a diesel engine for off-grid sites. Cuts 20 mm Plate: Ø45 mm round bar, 40×40 mm square bar, light I-beams. One Person, 8–10 Cuts/min: four-sided reversible blades at 48–56 HRC. Matches small scrap yards, mobile sites and workshops at the entry point of the Q43 line CE / ISO 9001 certified. Send your material profile, heaviest cross-section and power conditions for a quotation within 48 hours.
-
The Q91-200 is a 200 Ton scrap metal shear featuring a heavy-duty hydraulic gantry structure for processing light scrap metal, scrap steel, steel plates, rebar, H-beams and other ferrous metals. High Efficiency: Continuous automatic shearing delivers 20–40 tons per day with a 20–30 second cutting cycle, maximizing your daily scrap throughput. One-Person Operation: runs with a single operator while an excavator or grapple handles loading, cutting labor costs for small yards. Four-Sided Reversible Blades: H13 / M6V tool steel at 56–62 HRC, one blade set processes 5,000–10,000 tons, with spares shipped within 48 hours. Ideal for Small-Scale Scrap Yards: CE/ISO certified and factory-tested before shipment; blade length, motor power and feeding tank are configured to your site and power supply. Looking for a reliable factory direct 200 Ton scrap metal shear for sale? Contact us today for a customized configuration and a free quotation within 48 hours.
-
The Q43-250 is a 250 Ton hydraulic alligator shear for busy yards and demolition contractors that have outgrown the entry class. Heavier Cut: 25 mm plate, Ø55 mm round bar, 50×50 mm square bar. Faster Cycle: 9–12 cuts per minute on light material. Long Blade Options: 1,000 or 1,200 mm so longer members go through in one pass. Still Portable: no foundation bolts, diesel engine option, one trained operator. Matches busy small yards, salvage crews and fabrication shops processing bar stock by the bundle CE / ISO 9001 certified. Send your material mix, heaviest section and daily volume for a quotation within 48 hours.
-
Car body scrap metal shredder rated 10–36 tons per hour from a 1800 mm chamber — the entry machine for end-of-life vehicle work and heavy mixed intake.
Motor options: 2×132 kW / 2×160 kW / 2×185 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 550–680 mm diameter, 7-tooth and 9-tooth profiles for whole shells.
Built in-house: our own blade machining shop, a mortise-and-tenon reinforced chamber frame, and nylon-pin torque protection fitted as standard.
Best for: ELV recycling lines, dismantlers processing their own shells, fleet and insurance disposal, heavy mixed intake yards.
Not for: baled or bundled material — requires the 2200 mm class.
Send your vehicle intake figures and a quotation follows within 48 hours.
-
Car shells scrap metal shredder rated 15–42 tons per hour from a 2000 mm chamber — the volume ELV line machine, specified when shells are the material and tonnage is the reason the plant exists.
Motor options: 2×160 kW / 2×185 kW / 2×200 kW / 2×250 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 550–680 mm diameter, 9-tooth Hardox 500 for residual components and commercial vehicle shells.
Built in-house: blade machining facility, mortise-and-tenon reinforced chamber frame, nylon-pin torque protection as standard.
Best for: high-volume ELV lines under contract, centralised dismantling networks, fleet and salvage disposal, export shredding to mill specification.
Not for: baled material — requires the 2200 mm chamber class.
Send your intake figures and a quotation follows within 48 hours.
-
Heavy duty scrap metal shredder rated 20–50 tons per hour from a 2200 mm chamber — the high-throughput commercial plant machine, and the first class in the range where baled material is a legitimate feed.
Motor options: 2×160 kW, 2×185 kW, 2×200 kW or 2×250 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 550–720 mm diameter, 9-tooth Hardox 500 for section, bales and industrial waste.
Built in-house: blade machining facility, mortise-and-tenon reinforced chamber frame, nylon-pin torque protection, automatic lubrication.
Best for: large commercial plants on heavy mixed intake, mill and foundry feedstock, high-volume fleet and salvage, plants taking bales.
Not for: light-only intake or requirements above 50 tons per hour.
Send your intake breakdown and a quotation follows within 48 hours.
-
The flagship heavy duty scrap metal shredder: 25–60 tons per hour from a 2600 mm chamber with motor options to 2×400 kW — the largest machine in the HUAXIN dual shaft line, specified for mill-scale three-shift duty.
Motor options: 2×200 kW / 2×250 kW / 2×315 kW / 2×400 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 550–800 mm diameter, 50–62 HRC, knives set to the contracted charge specification.
Built in-house: blade machining facility, mortise-and-tenon reinforced chamber frame, nylon-pin torque protection, automatic lubrication, planetary reducers.
Best for: steel mills and large foundries, national-scale three-shift shredding, integrated recycling complexes, high-volume export processing.
Not for: anything below 25 tons per hour of sustained heavy output, or light-only intake.
Send your material analysis and a quotation follows within 48 hours.
-
The Q91-1000 is a 1000 Ton scrap metal shear for high-volume plants and small steel mills running 100–120 tons per day, and the first model in the Q91 range specified to cut baled scrap. Bale Cutting Rated: bales plus heavy sections on the same shift, on one machine. Continuous HMS Duty: heavy mixed ferrous all shift long. Cuts 100 mm Plate Continuously: up to 130 mm occasionally. Cuts Rebar: loose or bundled, concrete-adhered sections included. Long Blade: 1,800–2,000 mm for oversized material. Matches for large scrap recycling plants, small steel mills and bale-heavy intake operations CE / ISO 9001 certified. Send your material mix, bale share and daily volume for a quotation within 48 hours.
-
The Q91-1250 is a 1250 Ton scrap metal shear for plate-heavy plants running 160–200 tons of sized output per day, with bale cutting specified from this class upward. Heavy-Plate Line: 120 mm plate continuously, 150 mm occasionally. Long Blade: 2,000–2,200 mm for oversized sections. Bales Handled Alongside Heavy Plate: rated for both. Cuts Rebar: loose or bundled, reinforcement still tied into concrete included. Economics Quoted: blade consumption and charge consistency addressed in the quotation, not just force. Matches for large recycling plants, steel mills and furnace-feeding operations CE / ISO 9001 certified. Send your material mix, plate and bale share, and daily volume for a quotation within 48 hours.
-
The Q91-1600 is a 1600 Ton scrap metal shear for mills and large recycling bases running 200–240 tons of sized output per day, specified for continuous three-shift duty. Mill-Scale Duty: component selection and maintenance plan built for availability, not just force. Cuts 150 mm Plate Continuously: up to 190 mm occasionally. Long Blade: 2,400–2,600 mm. Bales and Heavy Plate Together: one machine handles both. Cuts Rebar: bundles and reinforced infrastructure sections across three shifts. Integration Data Included: power, foundation, lifting and material-flow data come with the quotation. Matches for steel mills, large integrated bases and furnace-line plants CE / ISO 9001 certified. Send your material mix, daily volume, shift pattern and site power for a quotation within 48 hours.
-
The Q91-2000 is a 2000 Ton scrap metal shear — the flagship of the HUAXIN Q91 range — for steel mills and very large recycling bases running 250–300 tons of sized output per day under continuous three-shift duty. Largest Force in the Range: 2000 tons, 2,600–2,800 mm blades. Cuts 170 mm Plate Continuously: up to 210 mm occasionally. Bales, Heavy Plate, Oversized Sections: all three on one machine. Cuts Rebar: including rebar-bound concrete sections from bridge demolition. Plant Data Package Included: power, foundation, lifting and material-flow data come with the quotation. Matches for steel mills, large integrated recycling bases and furnace-line operations CE / ISO 9001 certified. Tell us your material mix, daily volume, shift pattern and site power and the quotation follows within 48 hours.
-
The Q91-315 is a 315 Ton scrap metal shear featuring a heavy-duty hydraulic gantry structure for processing mixed ferrous scrap, steel plates up to 30 mm, rebar, H-beams, steel pipes and light steel structures. Mid-Tonnage Workhorse: continuous automatic shearing delivers 25–45 tons per day, sized between a 200T compact shear and a 500T+ heavy gantry. Cuts 30 mm Plate All Day: handles 50 mm sections occasionally without struggle. Matches for mid-size scrap yards and growing recycling plants CE/ISO certified and factory-tested before shipment; blade length, motor power and feeding tank are configured to your material and site. Looking for a reliable factory direct 315 Ton scrap metal shear for sale? Send your material profile and daily volume and we will return a configuration and quotation within 48 hours.
