350 Ton Container Shear (HC350) for Sale | HUAXIN

The HC350 from HUAXIN is the compact entry model of our horizontal container shear range: 350 metric tons (3,432 kN) of shearing force, a 1,000 mm (39.4″) blade, and a 1,000 mm wide enclosed feeding tank driven by two 22 kW motors (44 kW / 60 HP total). Cold-shears light, thin material—sheet offcuts, light structural steel, domestic scrap, and small appliances—into furnace-ready lengths on site. PLC automatic control, feeding tank built to order.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

A First Horizontal Box Shear for a Small Feeder Yard

When a feeder yard outgrows manual cutters or an alligator shear, the HC350 container shear (horizontal box shear) is bought for one clear economic reason: your feeder yard or demolition site is too compact for a full foundation gantry shear, yet hauling loose, un-cut light scrap to a downstream processor wastes half of every truckload on empty air. At 350 metric tons (3,432 kN), the HC350 is the entry point of our horizontal container range—combining a 1,000 mm (39.4″) wide enclosed feeding tank, a full-width 1,000 mm guillotine blade, and a modest 2 × 22 kW (44 kW / 60 HP total) motor set that runs on a standard workshop three-phase supply without transformer upgrades.

How It Cuts: Enclosed Pre-Compression Box + Guillotine Head

Unlike bottom-slide hook-lift shears that push a horizontal knife along the floor without pre-clamping, the HUAXIN HC350 is engineered as a horizontal pre-compression box shear. Loose scrap drops into the top hopper and enclosed horizontal feeding tank; a heavy hold-down compression assembly squeezes the bulky load into a dense flat slab; and the vertical guillotine blade cold-shears the compressed metal across the full 1,000 mm (39.4″) throat. Once the chamber is loaded by a small grapple or forklift, the PLC executes the pushing, clamping, and shearing strokes automatically.

What the HC350 Processes

Designed for satellite collection depots, metal stamping shops, and light demolition crews, the HC350 cold-shears a wide spectrum of thin and light-to-medium scrap:

  • Primary Light & Thin Feedstocks: Stamping sheet offcuts, corrugated roofing iron, thin-walled steel tubing and scaffolding pipes, light angle iron and C-channels, bicycle/motorcycle frames, household appliances, and domestic mixed scrap.
  • Secondary Yard Materials: Aluminum window extrusion frames, light copper/brass pipe bundles, flattened 200L drums, and light wire fencing.
  • Downstream Pairing & Output Gains: Routing sheared HC350 scrap into a compact PSX-200 Scrap Metal Crusher or Y81-125 Scrap Baler keeps the downstream crusher or baler fed with pre-sized, uniform pieces. Note that thick solid plate, heavy H-beams, and railway rails belong on higher-force shears, and wide panels over 1,000 mm fit better in the HC400 (1,400 mm tank).

Technical Specifications — HUAXIN HC350 Container Shear

Specification Item HC350 Parameter (Metric / Imperial)
Nominal Shearing Force 350 Metric Tons (3,432 kN / ~386 US Short Tons)
Feeding Tank Width 1,000 mm (39.4″ / 1.0 m) — tank length built to order
Guillotine Blade Width 1,000 mm (39.4″ / 1.0 m)
Blade Throat Height 300 mm or 400 mm (11.8″ or 15.7″) — selectable per feedstock
Installed Motor Power 22 kW × 2 units (44 kW / 60 HP total; available in equal or larger power)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels
Control & Drive System PLC automatic control, integrated hydraulic drive

Frequently Asked Questions — HC350

Why does the HC350 offer two blade height options (300 mm or 400 mm)?
The HC350 is the only model in the container range with a selectable 300 mm (11.8″) or 400 mm (15.7″) throat height. Choose 300 mm if you cut mostly flat sheet, strips, and small profiles for a shorter, faster vertical stroke; choose 400 mm if you feed bulky hollow appliances and tangled light skeletons that need extra vertical clearance.

Can the HC350 be relocated between job sites?
Yes. Because the horizontal container frame requires no deep foundation pit and sits on a flat prepared concrete pad, relocating the unit by crane and flatbed trailer is straightforward.

To price the HC350, send us your widest regular panel and your daily tonnage — we will confirm the throat height (300 or 400 mm) and motor package before quoting. Compare it with the wider HC400 if 1,220 mm sheets are your daily diet.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote