400 Ton Container Shear (HC400) for Sale | HUAXIN

The HC400 from HUAXIN steps up the tank width, not just the force: 400 metric tons (3,922 kN), but a 1,400 mm (55.1″) feeding tank and a 1,400 mm blade — 40% wider than the HC350 — so wider sheet panels, stamping skeletons, and bulkier light structures drop in whole without torch pre-cutting. Two 37 kW motors (74 kW / 100 HP total) keep cycle speeds brisk.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

Wider, Not Just Stronger: Why the 1,400 mm Tank Is the Real Upgrade

The step from the HC350 to the HC400 container shear is easy to misread if you only look at tonnage. Shearing force rises by just 50 metric tons (from 350T to 400T), but the feeding tank and guillotine blade widen by 40%—jumping from 1,000 mm (39.4″) to 1,400 mm (55.1″), backed by a 68% increase in hydraulic power (2 × 37 kW = 74 kW / 100 HP). In light-scrap recycling, bulky material fails on chamber width long before it fails on blade tonnage. A standard 1,220 mm (4-foot) fabrication sheet offcut, a wide roofing panel, or a bulky refrigerator shell needs a torch pre-cut to fit a 1,000 mm box; on the HUAXIN HC400, the grapple drops it in whole.

Technical Specifications — HUAXIN HC400 Container Shear

Specification Item HC400 Parameter (Metric / Imperial)
Nominal Shearing Force 400 Metric Tons (3,922 kN / ~441 US Short Tons)
Feeding Tank Width 1,400 mm (55.1″ / 1.4 m) — tank length sized to your yard
Guillotine Blade Width 1,400 mm (55.1″ / 1.4 m)
Blade Throat Height 400 mm (15.7″)
Installed Motor Power 37 kW × 2 units (74 kW / 100 HP total; available in equal or larger power)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels
Control & Drive System PLC automatic control, hydraulic pre-compression + guillotine drive

What the HC400 Cuts

Built for feeder yards and metalworking plants whose scrap arrives wide rather than thick, the HC400 processes:

  • Wide Sheet & Stamping Skeletons: Standard 4-foot (1,220 mm) steel sheet offcuts, punch-press skeletons, corrugated steel siding, and HVAC ductwork.
  • Appliances, Light Structures & Tubes: Whole washing machines, refrigerators, light roof trusses, scaffolding pipes, angle iron, and domestic mixed scrap.
  • Upstream Pre-Sizing for Crushers & Balers: Using the HC400 to pre-crop wide, awkward scrap before feeding a PSX-280 Hammer Mill Crusher or Y81F Scrap Metal Baler keeps the downstream crusher or baler fed with pre-sized, uniform pieces. If your 1,400 mm loads include heavier demolition sections that require more blade force, see the HC500 (500T, 90 kW).

Frequently Asked Questions — HC400

Should our yard buy the HC350 or the HC400?
Measure the width of your most common incoming scrap panels. If 90% of your feed is under 950 mm wide, the HC350 saves power and capital cost. If fabrication skeletons, appliances, or panels regularly measure 1,000 to 1,350 mm across, the HC400 eliminates manual torch-cutting on every grapple load.

The HC400 exists for one measurement: the width of your widest regular panel. Measure it, and the choice between the HC350 and the HC400 makes itself. See the HC350 below or the HC500 above, or request a quotation with your material list and widest piece.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote