
1300 Ton Scrap Metal Shear Baler (Y83Q-1300) for Sale | HUAXIN
The Y83Q-1300 is the 1,300-ton (12,749 kN) flagship dual-mode shear baler from Huaxin Co., Ltd. (HUAXIN): combining a 500-ton side press, 545-ton lid, 420-ton stamper, and 1,000 mm (39.4″) blade to compress wide scrap into 910 × 800 mm (35.8 × 31.5″) bales (Baling Mode) or shear heavy logs into furnace charge (Shearing Mode).
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The Y83Q-1300 1,300-ton scrap metal shear baler is the flagship model of the HUAXIN dual-mode baler-logger-shear series. Designed for large consolidation yards, port scrap terminals, and regional processors that handle both bulky hollow scrap (commercial truck cabs, whole ELV bodies, industrial appliances) and heavier structural steel, it pairs an extra-wide 8,000 × 2,500 × 2,000 mm (26.2 × 8.2 × 6.6 ft) open box with a 1,000 mm (39.4″) guillotine throat. Like its smaller siblings, the Y83Q-1300 runs in Baling Mode to eject dense 910 × 800 mm (35.8 × 31.5″) rectangular bales or switches to Shearing Mode to cut compacted logs under 1,300 tons (12,749 kN) of blade force. For yards with lighter daily intake or narrower box requirements, compare the Y83Q-1000 (1,000-ton shear baler) and Y83Q-500 (500-ton shear baler), or view our complete scrap metal shear catalog.
545-Ton Lid and 500-Ton Side Press: Built for Wide Bulky Scrap
When a yard receives wide commercial vehicle cabs, tangled demolition framing, or bulky industrial sheet alongside standard HMS, an 800 mm throat often requires crane operators to torch-trim wide pieces before loading. The Y83Q-1300 eliminates that bottleneck by expanding the open charge box to 2,500 mm (8.2 ft) wide and 2,000 mm (6.6 ft) deep across an 8,000 mm (26.2 ft) length. Once loaded, a 545-ton (5,345 kN) hydraulic lid closes from above while a 500-ton (4,903 kN) lateral side press squeezes the charge down to a closed cross-section of 910 × 800 mm (35.8 × 31.5″).
In Baling Mode, the 120-ton (1,177 kN) pusher compacts light sheet, white goods, or vehicle shells against the closed shear gate into a high-density bale before the gate opens for direct front discharge. In Shearing Mode, the 420-ton (4,119 kN) vertical stamper locks the compacted log at the throat while the 1,300-ton blade shears it into preset furnace lengths.
Choosing Between the Y83Q-1300 Shear Baler and the PS 1300T Side-Compression Shear
At the 1,300-ton level, HUAXIN offers two distinct machines depending on whether your business sells finished bales:
- Select the Y83Q-1300 Shear Baler when your yard needs two-in-one flexibility—producing rectangular bales from light sheet, aluminum, and car bodies in Baling Mode while kneading and shearing medium-to-heavy mixed scrap through its 1,000 mm throat in Shearing Mode.
- Select the PS 1300T Side-Compression Shear when your yard operates strictly as a heavy shearing line (no uncut bale ejection) and requires a 9,500 mm box, higher-tonnage pusher force, and up to a 1,400 mm blade for heavy structural steel.
HUAXIN Y83Q-1300 Basic Technical Specifications
The table below provides the core hydraulic forces, box geometry, and drive configurations for the HUAXIN Y83Q-1300. Overall installation footprint and hourly output in Baling Mode vs. Shearing Mode are confirmed by our engineering team according to your site layout and scrap mix before quoting.
| Parameter | Y83Q-1300 Specification (Metric / Imperial) |
|---|---|
| Shearing Force | 1,300 ton (12,749 kN / 1,433 short ton) |
| Operating Modes | Dual Mode: High-Density Bale Ejection Mode & Automatic Shearing Mode |
| Blade Width (Throat) | 1,000 mm (39.4″) |
| Hold-Down Stamper Force | 420 ton (4,119 kN / 463 short ton) |
| Lateral Side Press Force | 500 ton (4,903 kN / 551 short ton) |
| Lid Closing Force | 545 ton (5,345 kN / 601 short ton) |
| Rear Pusher Force | 120 ton (1,177 kN / 132 short ton) |
| Open Charge Box (L × W × H) | 8,000 × 2,500 × 2,000 mm (26.2 × 8.2 × 6.6 ft) |
| Closed Chamber / Bale Section (W × H) | 910 × 800 mm (35.8 × 31.5″) |
| Hydraulic Drive Power | 4 × 90 kW or 4 × 110 kW (360 kW or 440 kW / 483 or 590 HP) |
| Control & Customs Classification | PLC cabinet + handheld remote control · Export HS Code 8462.3990 |
Four-Group Hydraulic Power Pack and Heavy Wear Protection
Driving a 1,300-ton shear cylinder alongside a 545-ton lid and 500-ton side press requires high hydraulic flow without overheating. The Y83Q-1300 uses four independent motor-pump groups rated at 4 × 90 kW (360 kW / 483 HP) or 4 × 110 kW (440 kW / 590 HP), allowing multi-stage pressure unloading during rapid box closure and full combined pressure during final baling or heavy shearing. All interior compression surfaces are armored with replaceable high-hardness wear plates, and the 1,000 mm guillotine head uses four-edge reversible alloy tool steel blades.
Frequently Asked Questions — Y83Q-1300 Flagship Shear Baler
When should a yard step up from the Y83Q-1000 to the Y83Q-1300?
Step up to the Y83Q-1300 when your incoming scrap includes wider commercial truck cabs, heavier demolition steel, or bulky industrial fabrications that benefit from the wider 2,500 × 2,000 mm open box, the larger 910 × 800 mm closed bale cross-section, and the extra 300 tons of blade shearing force (1,300T vs. 1,000T). For standard passenger car bodies and medium mixed scrap, the Y83Q-1000 remains the cost-effective choice.
Can the bale length and sheared cut length both be adjusted?
Yes. In Baling Mode, final bale length varies with charge weight and material density inside the 910 × 800 mm tunnel. In Shearing Mode, the operator sets the exact pusher stroke length on the PLC screen to match steel mill EAF charging rules or downstream shredder requirements.
To price the Y83Q-1300 for your yard, send us your primary scrap grades, maximum piece dimensions, and local transformer capacity so our engineers can prepare a custom layout and quotation, or compare all models in the Scrap Metal Shear Baler category.


