6-8 TPH Scrap Iron Crusher for White Goods | 1600mm Scrap Metal Crusher (PSX-315)

Bulky white goods—refrigerator shells, commercial washing machines, HVAC air handlers, and vending cabinets—jam inside narrow 1,400 mm (55″) chutes unless workers spend hours torch-cutting them first. The PSX-315 6-8 TPH scrap metal crusher from Huaxin Co., Ltd. widens the infeed throat to 1,600 mm (63″) and pairs it with a high-downforce hydraulic feed roller and a 315 kW (425 HP) main motor. Designed specifically for WEEE/appliance dismantlers and regional sheet-iron yards (50–65 tons/day), it liberates 0.95–1.20 t/m³ clean steel nuggets while freeing copper motor windings, brass valves, and aluminum heat exchangers for downstream eddy-current recovery. Accepted Scrap Streams (Direct vs. Pre-Processed): While sized at 1,600 mm (63″) for white goods, the PSX-315 works equally well as a metal drum crusher, metal can crusher, light scrap metal crusher, aluminum scrap crusher, and motor crusher—using one fixed screen aperture (such as 70 mm / 2.8″) for every material type. For car shells, compacted bundles, and heavy structural steel scrap that exceed the 6–8 TPH class throat clearance, yards typically shear them on a Q91 gantry shear (adding 20%–30% more output) or pre-shred them in an HX-DS shredder (boosting throughput by 25%–35%) prior to crushing.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

Why Throat Width—Not Just Motor Horsepower—Governs Appliance Crushing

Ask any operator running a white-goods dismantling line where their bottleneck lies: it is almost never rotor horsepower; it is bridging at the feed chute. Commercial double-door refrigerators, industrial electrical enclosures, and tangled roofing profiles measure 1,350 to 1,520 mm (53″–60″) across. On a narrower crusher, those boxy cabinets hang up on the side cheeks until a crane operator pokes them down.

By stepping up to the 1,600 mm (63″) wide chamber platform, the PSX-315 6-8 tph scrap metal crusher from Huaxin Co., Ltd. lets full-width depolluted appliances slide straight down the inclined apron conveyor without manual pre-slitting. An oversized toothed hydraulic pre-compression roller bites the top of the cabinet, collapses the polyurethane-lined walls into a dense mat, and feeds it directly into the 315 kW (425 HP) hammer circle.

Accepted Scrap Streams (Direct vs. Pre-Processed): While sized at 1,600 mm (63″) for white goods, the PSX-315 works equally well as a metal drum crusher, metal can crusher, light scrap metal crusher, aluminum scrap crusher, and motor crusher—using one fixed screen aperture (such as 70 mm / 2.8″) for every material type. For car shells, compacted bundles, and heavy structural steel scrap that exceed the 6–8 TPH class throat clearance, yards typically shear them on a Q91-315 Gantry Shear (adding 20%–30% more output) or pre-shred them in an HX-DS1200 Shredder (boosting throughput by 25%–35%) prior to crushing.

Liberation Flow: From Whole White Goods to Sorted Ferrous, Zorba & Fluff

Modern appliance recycling is a three-product business: clean furnace steel, high-value non-ferrous metals (copper/aluminum/brass), and controlled fluff disposal. Here is how the PSX-315 turnkey line processes incoming cabinets in a single continuous pass:

  1. Metered Pre-Compression (1,600 mm / 63″ Apron + Roller): Depolluted washers, dryers, water heaters, and sheet iron are flattened and fed under PLC amperage feedback so the 315 kW motor stays in its peak 85–92% torque band.
  2. Ballistic Delamination (50–65 kg / 110–143 lb ZGMn18Cr2Mo Hammers): Spinning at 560–620 RPM, the manganese hammers shatter brittle plastic tubs, knock off enamel and powder coatings, and strip aluminum fins and copper harnesses away from steel brackets without smearing the non-ferrous metal onto the steel.
  3. Screen Classification (40–80 mm / 1.6″–3.1″ Grates): Only fully liberated fragments small enough to pass the alloy bar grates exit the bottom onto the spring-isolated vibrating pan feeder.
  4. Air Classification, Magnetic Drum & Eddy-Current Zorba Sorting: A negative-pressure cyclone + baghouse suction hood pulls foam insulation and paint dust off the discharge drop point; a high-gradient permanent magnet drum lifts clean steel (0.95–1.20 t/m³) to the ferrous stockpile conveyor; and an optional eccentric-rotor eddy-current separator fires aluminum, copper, and brass into a dedicated Zorba bin.

PSX-315 (6–8 TPH / 1,600 mm Class) Technical Specification Table

Specification Item PSX-315 Standard Configuration
Model Designation & Output PSX-315 (PSX315) | 6.0–8.0 TPH (48–65 tons per 8-hour shift)
Chamber & Chute Width 1,600 mm (63″) clear throat width | 500 mm (20″) max roller lift
Main Drive Motor & Voltage 315 kW (425 HP) | Available in 380V/400V/415V/440V LV or 6kV/10kV HV
Hammer Configuration 16–20 pcs ZGMn18Cr2Mo cast hammers | 50–65 kg (110–143 lb) per hammer
Screen Grate Openings 40–80 mm (1.6″–3.1″) standard (35–120 mm / 1.4″–4.7″ customizable)
Output Bulk Density 0.95–1.20 t/m³ (59–75 lb/ft³) clean coating-free furnace spheres
Main Shaft & Bearing Protection Forged 42CrMo alloy shaft (JB/T 4730 Class I ultrasonic tested) + PT100 bearing temperature sensors + hydraulic pin extractor
Export Logistics & Tariff Code 2–3 × 40HQ Containers | HS Code: 8479.8190 | 45-Day Factory Lead Time

Comparing the three 1,600 mm (63″) Throat Models at Huaxin Co., Ltd.

We manufacture three distinct power tiers on the 1,600 mm (63″) wide chassis so you only pay for the transformer and motor capacity your scrap mix requires:

  • PSX-315 (This Model — 315 kW / 6–8 TPH): Optimized for bulky hollow appliances, white goods, steel drums, and 1–3.5 mm (0.04″–0.14″) sheet metal.
  • PSX-400 (400 kW / 8–12 TPH): Adds 27% more drive power to break loose light-iron bales and heavier 3–5 mm (0.12″–0.20″) commercial profiles at up to 10+ TPH.
  • PSX-450 (450 kW / 9–12 TPH): Heavy-rotor flagship of the 1,600 mm (63″) class built for continuous two-shift foundry charge production through fine 35–50 mm (1.4″–2.0″) grates.
  • Need to Crush Flattened Car Shells? Step up to the 1,800 mm (71″) PSX-560 (12–15 TPH) or review all 13 models on our Scrap Metal Crusher Pillar Page.

Frequently Asked Questions: PSX-315 Appliance & Sheet Crusher

1. Do refrigerator compressors and washing machine motors need to be removed before the PSX-315?

Sealed refrigeration compressors must always be removed first for EPA/environmental refrigerant degassing, and removing heavy cast-iron compressor shells prevents unnecessary wear on the 50–65 kg (110–143 lb) hammers. Small fractional-horsepower fan motors, wiring harnesses, and copper tubing can go straight through the PSX-315—the hammers shatter the motor housings so the magnetic drum and eddy-current separator can sort the steel laminations from the copper windings.

2. Should I order the 315 kW motor in 400V low-voltage or 6kV/10kV high-voltage?

If your plant already has a 500 kVA low-voltage transformer, 380V/400V/415V with a heavy-duty VFD or liquid/soft starter is simplest. However, if you are installing a new dedicated utility transformer for the crushing line, we recommend specifying the 6 kV or 10 kV high-voltage slip-ring/squirrel-cage motor: it draws 90% less starting current, reduces copper cable cross-sections, and handles momentary impact spikes with higher overload torque.

Request a Custom PSX-315 Line Proposal: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Request Quote Online) for 2D/3D plant drawings and itemized pricing.

Additional information

Machine Type

Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series)

Model

PSX-315 (PSX315)

Hourly Capacity

6-8 TPH (50-65 tons/day (8-hour shift))

Inlet Width

1,600 mm

Main Motor Power

315 kW

Voltage System

380V / 400V / 415V / 440V Low-Voltage (or 6kV/10kV High-Voltage)

Output Fragment Size

40-80 mm standard (30-120 mm customizable)

Crushed Steel Density

0.95-1.25 t/m³

Hammer Material

Mn18Cr2 High-Manganese Cast Steel (50-65 kg per hammerhead (Mn18Cr2))

Maintenance System

Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt

Standard Line Equipment

VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control

Optional Systems

Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter

Warranty & Delivery

1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote