
30-50 TPH Heavy Duty Metal Crusher & Hammer Mill | 2500mm Scrap Crusher (PSX-1600)
When daily processing targets reach 250 to 400 metric tons per shift (30–50 TPH) across flattened trucks, medium-density bales, and heavy mixed demolition scrap, a 2,200 mm (87″) throat becomes the limiting factor. Manufactured by Huaxin Co., Ltd., the PSX-1600 30-50 TPH scrap metal crusher expands the crushing chamber to a massive 2,500 mm (98″) clear width powered by a 1,600 kW (~2,150 HP) high-voltage motor and 150–180 kg (330–397 lb) ZGMn18Cr2Mo hammers. It produces 1.25–1.45 t/m³ furnace-ready crushed steel for regional EAF mills and export terminals. Unrestricted Multi-Material Crushing (2,500 mm / 98″ Chamber): The 1,600 kW PSX-1600 heavy duty metal crusher digests every major scrap category on one grate screen: compacted scrap metal bales, whole cars and pickup cabs, 6–10 mm (0.24″–0.40″) structural steel scrap, shipbreaking plate trims, white goods, 200L drums, cast-aluminum engines, and industrial motors. Pre-cropping heavy structural steel with our Q91 gantry shear increases output by 20%–30%, while tandem operation behind an HX-DS2600 dual-shaft shredder delivers a 25%–40% throughput gain.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Why 30–50 TPH Yards Step Up to the 2,500 mm (98″) Wide-Body Heavy-Duty Metal Crushers
At 30 to 50 metric tons per hour, crane operators cannot spend time aligning every crooked truck cab, tangled rebar mat, or wide scrap bale perfectly parallel with the conveyor sidewalls. On the PSX-1600 30-50 tph scrap metal crusher from Huaxin Co., Ltd., the chain-plate apron conveyor and crushing chamber expand to a full 2,500 mm (98″ / over 8 feet) clear internal width.
Backed by a 1,600 kW (~2,150 HP) 6kV/10kV high-voltage main drive and a massive Ø1,800 mm (Ø71″) capped disc rotor, the PSX-1600 functions as a true industrial metal heavy-duty metal crushers. Its dual-roller hydraulic pre-compression assembly exerts 60 tons of bite force across a 950 mm (37.4″) vertical opening—crushing full-size pickup bodies, light-to-medium scrap bales, and 6–10 mm (0.24″–0.40″) structural plate offcuts into uniform 1.25–1.45 t/m³ (78–90 lb/ft³) EAF melt charge.
Unrestricted Multi-Material Crushing (2,500 mm / 98″ Chamber): The 1,600 kW PSX-1600 heavy duty metal crusher digests every major scrap category on one grate screen: compacted scrap metal bales, whole cars and pickup cabs, 6–10 mm (0.24″–0.40″) structural steel scrap, shipbreaking plate trims, white goods, 200L drums, cast-aluminum engines, and industrial motors. Pre-cropping heavy structural steel with our Q91-1600 Gantry Shear increases output by 20%–30%, while tandem operation behind an HX-DS2600 Dual-Shaft Shredder delivers a 25%–40% throughput gain.
PSX-1600 (1,600 kW / 30–50 TPH) Heavy Heavy-Duty Metal Crushers Datasheet
| Technical Parameter | PSX-1600 Factory Specification |
|---|---|
| Model & Hourly Output | PSX-1600 (PSX1600) | 30.0–50.0 TPH (240–400 tons per 8-hour shift) |
| Infeed Throat Dimensions | 2,500 mm (98″) width × 950 mm (37.4″) dual-roller hydraulic compression throat |
| Main High-Voltage Drive | 1,600 kW (~2,150 HP) | 6 kV / 6.6 kV / 10 kV / 11 kV (50/60 Hz) + VCB & Liquid Resistance Starter |
| Auxiliary Plant Power | ~180–240 kW (apron feeder, pre-press hydraulic station, vibrating pan, dual magnets, air classifier, baghouse & eddy current) |
| Rotor & Hammer Mass | Ø1,800 mm (Ø71″) capped rotor | 26–30 pcs ZGMn18Cr2Mo hammers (150–180 kg / 330–397 lb each) |
| Screen Grates & Liner Armor | 60–120 mm (2.4″–4.7″) top & bottom grates | 80–100 mm (3.1″–3.9″) ZGMn13Cr2Mo box liners |
| Output Density & Plate Capacity | 1.25–1.45 t/m³ (78–90 lb/ft³) | Crushes up to 10 mm (0.40″) mild steel plate & baled ELVs |
| Customs HS Code & Warranty | HS Code: 8479.8190 | 1-Year Warranty (3–5 Year Main Frame Structural Guarantee by Huaxin Co., Ltd.) |
Dual-Zone Grate Geometry (Upper & Lower Grates) for High-Tonnage Discharge
In a 30–50 TPH heavy-duty metal crushers, a conventional bottom-only grate screen cannot evacuate 45 tons per hour of crushed steel fast enough—already-sized nuggets keep circulating with the rotor, wasting electricity and wearing down hammer tips. On the PSX-1600, Huaxin Co., Ltd. implements a 240-degree wrap-around upper and lower grate architecture:
- Primary Anvil & Upper Relief Grates: Once the 150–180 kg (330–397 lb) hammers shear the incoming car body or bale across the primary anvil bar, fragments already smaller than 70–90 mm (2.8″–3.5″) exit immediately through the upper rear grate windows—cutting rotor circulation load by 30%.
- Heavy Lower Bar Grates & Hydraulic Ejection Door: Thicker steel continues through the lower crushing arc until it reaches target density, while any uncrushable solid axle (>60 mm / 2.4″ solid alloy bar) is discharged within 1.5 seconds via the top hydraulic tramp-iron ejection door.
- 360 mm (14.2″) Forged 42CrMo Main Shaft & Oil-Mist Cooling: Machined from a single vacuum-degassed 42CrMo forging and ultrasonic-inspected to JB/T 4730 Class I, supported by oversized spherical roller bearings with dedicated chiller-cooled oil circulation.
Turnkey Material Handling & Environmental Scope
| Plant Stage | Included / Configurable Engineering Equipment |
|---|---|
| 1. Infeed & Pre-Compression | 12 m × 2.5 m (39 ft × 8.2 ft) heavy manganese apron conveyor + 60T twin-cylinder dual-roller hydraulic feeder |
| 2. Under-Mill Surge Protection | Heavy armored electromagnetic/unbalanced-motor vibrating pan feeder (protects transfer belts from hot steel impact) |
| 3. Dedusting & Fluff Separation | Closed-loop Z-box air classifier + cyclone separator + pulse-jet baghouse filter (<20 mg/Nm³ stack emission) |
| 4. Ferrous & Zorba Recovery | Dual-drum permanent NdFeB magnetic separation line + radial ferrous stacker + eccentric eddy-current Zorba sorting system |
Compare Neighboring High-Capacity Heavy-Duty Metal Crushers
- 2,200 mm (87″) 1,200 kW Option (25–40 TPH): PSX-1200 Automobile Shredder.
- 3,000 HP Steelworks Line (40–70 TPH, 2,600 mm / 102″ Throat): PSX-3000 (2,250 kW).
- Matched Tandem Pre-Shredder: Pair with our HX-DS2200 or HX-DS2600 Dual-Shaft Pre-Shredder, or visit the Scrap Metal Crusher Pillar Page.
FAQ: PSX-1600 (30–50 TPH) Heavy Heavy-Duty Metal Crushers
1. What is the difference between a standard scrap metal crusher and the PSX-1600 heavy-duty metal crushers?
Light crushers (200–450 kW) rely on thin-sheet impact against a simple bottom grate. A heavy heavy-duty metal crushers like the 1,600 kW PSX-1600 uses a capped spider/disc rotor, 150–180 kg (330–397 lb) hammers, a 60-ton double-roller compression feeder, upper-and-lower discharge grates, and a ballistic tramp-iron ejection door to rip apart whole vehicles, compacted bales, and 10 mm (0.40″) structural steel continuously.
2. How does Huaxin Co., Ltd. guarantee main frame integrity on a 1,600 kW mill?
Every PSX-1600 housing is fabricated from 60–80 mm (2.4″–3.1″) Q355B/Q460C plate at our Zunhua facility, stress-relieved in a full-chamber annealing furnace after welding, bored on a single CNC floor mill for 100% bearing concentricity, and backed by an industry-leading 3–5 year main frame structural warranty.
Request PSX-1600 Engineering Drawings & Quotation: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Us) for a complete plant proposal.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-1600 (PSX1600) |
| Hourly Capacity | 30-50 TPH (240-400 tons/day (8-hour shift)) |
| Inlet Width | 2,500 mm |
| Main Motor Power | 1,600 kW (High-Voltage 6kV / 10kV / 11kV) |
| Voltage System | 6kV / 6.6kV / 10kV / 11kV High-Voltage (3-Phase 50/60 Hz) |
| Output Fragment Size | 70-110 mm standard (50-120 mm customizable) |
| Crushed Steel Density | 1.30-1.55 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (135-165 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
