scrap metal crusher

Showing 1–12 of 13 results

  • Placeholder
    3-5 TPH Metal Drum & Can Scrap Metal Crusher | Hammer Mill (PSX-200)

    Small feeder yards and drum recyclers rarely have a 10 kV high-voltage substation on site, yet loose 200-liter (55-gallon) oil drums and 0.5–2.5 mm (0.02″–0.10″) stamping skeletons eat up trailer volume fast. Manufactured by Huaxin Co., Ltd. (HUAXIN), the PSX-200 3-5 TPH scrap metal crusher runs directly off a standard 380V/400V/415V/440V low-voltage transformer (315 kVA) via a 200 kW (270 HP) main motor. Its 1,400 mm (55″) hydraulic pre-press feed throat collapses hollow barrels before they reach the 580–650 RPM rotor, where 35–45 kg (77–99 lb) ZGMn18Cr2Mo cast manganese hammers and 30–60 mm (1.2″–2.4″) grate screens turn painted tin into clean 0.85–1.15 t/m³ (53–72 lb/ft³) foundry pellets at 24–40 tons per 8-hour shift. Material Range & Pre-Sizing Rules: Don’t let the “Drum & Can” headline fool you—the PSX-200 is a multi-purpose scrap metal crusher that processes empty 200L steel drums, metal cans, light scrap iron, stamping offcuts, aluminum scrap castings, copper-wound electric motors, and bicycle frames directly through a single standard grate screen (such as 50 mm / 2.0″ or 70 mm / 2.8″). It can also process car shells, household white goods, and thicker structural steel scrap, provided those oversized materials are pre-cut with our hydraulic shear or pre-ripped by an HX-DS dual-shaft shredder first to fit the 1,400 mm (55″) throat. Pre-shearing boosts hourly output by 20%–30%, while tandem pre-shredding lifts throughput by 25%–40%.

  • Placeholder
    5-6 TPH Light Scrap Metal Crusher & Hammer Mill | Scrap Iron Crusher (PSX-280)

    When a scrap stream shifts from thin 0.8 mm (0.03″) paint cans to folded washing machine cabinets, 2–3.5 mm (0.08″–0.14″) structural brackets, and unbolted car doors, a 200 kW rotor loses RPM on impact. Engineered by Huaxin Co., Ltd., the PSX-280 5-6 TPH scrap metal crusher retains the space-saving 1,400 mm (55″) chamber width while boosting main shaft power by 40% to 280 kW (375 HP) and upgrading hammer mass to 45–55 kg (99–121 lb) of ZGMn18Cr2Mo steel. Capable of running on a 400 kVA low-voltage (380V–440V) transformer, it produces 40–50 tons per day of 0.90–1.20 t/m³ furnace-ready steel nuggets through 35–70 mm (1.4″–2.8″) grate screens. What Else Can the PSX-280 Crush? Beyond loose light iron, this 280 kW hammer mill crushes sheet steel trimmings, 200L oil/paint drums, metal cans, aluminum profiles, cast-aluminum engine housings, and scrap electric motors on the exact same grate screen (e.g., 60 mm / 2.4″ or 70 mm / 2.8″) without swapping parts. Because its infeed opening is 1,400 mm (55″) wide, larger feedstocks—such as whole car shells, bulky refrigerators/washing machines, and long steel scrap—normally go through our alligator/gantry shear or dual-shaft shredder first before feeding the PSX-280. Running pre-sheared scrap increases output by 20%–30%, and feeding pre-shredded material raises capacity by 25%–40%.

  • Placeholder
    6-8 TPH Scrap Iron Crusher for White Goods | 1600mm Scrap Metal Crusher (PSX-315)

    Bulky white goods—refrigerator shells, commercial washing machines, HVAC air handlers, and vending cabinets—jam inside narrow 1,400 mm (55″) chutes unless workers spend hours torch-cutting them first. The PSX-315 6-8 TPH scrap metal crusher from Huaxin Co., Ltd. widens the infeed throat to 1,600 mm (63″) and pairs it with a high-downforce hydraulic feed roller and a 315 kW (425 HP) main motor. Designed specifically for WEEE/appliance dismantlers and regional sheet-iron yards (50–65 tons/day), it liberates 0.95–1.20 t/m³ clean steel nuggets while freeing copper motor windings, brass valves, and aluminum heat exchangers for downstream eddy-current recovery. Accepted Scrap Streams (Direct vs. Pre-Processed): While sized at 1,600 mm (63″) for white goods, the PSX-315 works equally well as a metal drum crusher, metal can crusher, light scrap metal crusher, aluminum scrap crusher, and motor crusher—using one fixed screen aperture (such as 70 mm / 2.8″) for every material type. For car shells, compacted bundles, and heavy structural steel scrap that exceed the 6–8 TPH class throat clearance, yards typically shear them on a Q91 gantry shear (adding 20%–30% more output) or pre-shred them in an HX-DS shredder (boosting throughput by 25%–35%) prior to crushing.

  • Placeholder
    8-12 TPH Scrap Metal Crusher & Hammer Crusher | 400kW Metal Crusher (PSX-400)

    Crossing the 10-ton-per-hour (80–95 tons/day) threshold is the inflection point where a regional scrap yard transitions from a local collector to a direct steel-mill supplier. Built by Huaxin Co., Ltd., the PSX-400 8-12 TPH scrap metal crusher combines a 1,600 mm (63″) wide chamber with a 400 kW (540 HP) main drive and 60–75 kg (132–165 lb) ZGMn18Cr2Mo hammers. Unlike smaller drum mills, the PSX-400 has the shaft torque to break open low-density light-iron bales, sheared ELV body sections, and 3–5 mm (0.12″–0.20″) commercial steel scrap into 1.00–1.25 t/m³ furnace charge. One Hammer Crusher for Every Yard Stream: Whether your crane is loading commercial steel scrap, loose light-iron bales, depolluted white goods, sheared car shells, 200L metal drums, aluminum castings, engine housings, or copper-bearing motor scrap, the 400 kW PSX-400 digests them all on a single 60–80 mm (2.4″–3.1″) grate screen without hardware changes. Pairing the line with a Huaxin hydraulic shear to crop oversized beams increases net output by 20%–30%, while placing an HX-DS dual-shaft shredder upstream drives hourly production up by 25%–40%.

  • Placeholder
    9-12 TPH Steel Scrap Crusher for Foundry Charge | 450kW Hammer Mill (PSX-450)

    Induction furnaces and ductile-iron foundries demand small 30–45 mm (1.2″–1.8″), high-density (>1.15 t/m³) steel nuggets free of paint and oil—yet installing a small-aperture grate screen on a standard hammer mill cuts hourly output by 30%. The PSX-450 9-12 TPH scrap metal crusher from Huaxin Co., Ltd. solves that retention bottleneck by putting our highest power density—450 kW (600 HP) and 65–80 kg (143–176 lb) ZGMn18Cr2Mo hammers—inside a heavily armored 1,600 mm (63″) chamber. It sustains 9–12 TPH (75–100 TPD) even through tight foundry grates while digesting 3–6 mm (0.12″–0.24″) plate punchings, cast-iron returns, and sheared auto stampings. Full-Yard Feedstock Capability: Foundry charge is only one side of the PSX-450. In daily scrap yard operation, this 450 kW steel scrap crusher processes mixed scrap iron, pre-cut car shells, household appliances, 200L steel drums, metal cans, cast-aluminum engine blocks, and industrial electric motors through the same grate screen (screen size only dictates final nugget density, never material compatibility). Pre-cutting heavy or long stock with our hydraulic shear improves output by 20%–30%, and tandem operation with our scrap metal shredder increases capacity by 25%–35%.

  • Placeholder
    12-15 TPH Car Shell Crusher & Metal Hammer Mill | 1800mm Metal Crusher (PSX-560)

    A standard passenger car measures 1,720–1,820 mm (68″–72″) wide—and even more after being flattened by a mobile car baler—making an 1,800 mm (71″) clear throat width the physical minimum for direct car-shell crushing. Manufactured by Huaxin Co., Ltd., the PSX-560 12-15 TPH scrap metal crusher is our entry-level automotive ELV hammer mill, combining an 1,800 mm (71″) hydraulic pre-compression chute with a 560 kW (750 HP) main drive and 75–90 kg (165–198 lb) ZGMn18Cr2Mo hammers. It turns depolluted car shells, light truck cabs, and mixed yard iron into 100–120 tons/day of clean 1.05–1.30 t/m³ crushed steel. Not Just for Car Shells—Complete Material Flexibility: Although its 1,800 mm (71″) throat is built to swallow flattened ELV car bodies whole, the PSX-560 is a full-spectrum scrap metal crushing machine. Using one standard grate screen (e.g., 70 mm / 2.8″ or 80 mm / 3.1″), it crushes commercial steel scrap, light scrap iron, white goods (refrigerators/washers), 200L metal drums, aluminum scrap castings, engine housings, and electric motors. When fed pre-sheared heavy scrap from our gantry shear, output rises by 20%–30%; when fed pre-ripped stock from an HX-DS1800 shredder, hourly tonnage jumps by 25%–40%.

  • Placeholder
    13-16 TPH Aluminum & Engine Scrap Metal Crusher | 630kW Hammer Mill (PSX-630)

    Proven in export reference installations across South Korea and Mexico, the PSX-630 13-16 TPH scrap metal crusher from Huaxin Co., Ltd. is our benchmark 630 kW (850 HP) high-voltage (6kV/10kV/11kV) hammer mill line in the 1,800 mm (71″) throat class. Built to operate either as a standalone car-shell & HMS heavy-duty metal crushers or directly behind an HX-DS2000/2200 twin-shaft pre-shredder, it swings 85–100 kg (187–220 lb) ZGMn18Cr2Mo hammers to produce 105–130 tons per shift of 1.15–1.35 t/m³ EAF charge alongside high-purity Zorba non-ferrous sorting. Ferrous & Non-Ferrous Multi-Material Coverage: Featuring “Aluminum & Engine” in the title highlights its 630 kW high-voltage torque and Zorba recovery line, but the PSX-630 spends just as much shift time operating as a car shell crusher, steel scrap crusher, scrap iron crusher, white goods crusher, metal drum crusher, and motor crusher. A single grate aperture handles all of these feedstocks continuously. Cropping oversized frames with a Huaxin shear boosts throughput by 20%–30%, while coupling an upstream HX-DS2000 dual-shaft shredder lifts output from 13–16 TPH to 16–19.5 TPH (+25% to 40%).

  • Placeholder
    20-25 TPH Car Body & ELV Scrap Metal Crusher | 2200mm Hammer Mill (PSX-900)

    Feeding whole, unflattened sedans, SUVs, and light commercial vans directly into a hammer mill without a car logger requires a minimum 2,200 mm (87″) clear chamber width and massive upper-roller crushing force. Engineered by Huaxin Co., Ltd., the PSX-900 20-25 TPH scrap metal crusher combines a 2,200 mm (87″) twin-cylinder pre-compression throat with a 900 kW (1,200 HP) high-voltage main drive and 100–125 kg (220–275 lb) ZGMn18Cr2Mo alloy hammers. It processes 160–200 tons per 8-hour shift of whole depolluted vehicle hulls, loose light-scrap bales, and mixed HMS into 1.15–1.35 t/m³ EAF steelmaking charge. Multi-Stream Yard Versatility (2,200 mm / 87″ Throat): Beyond unflattened passenger cars and SUVs, the 900 kW PSX-900 serves as an all-purpose industrial metal crusher for loose light-iron bales, C&D steel scrap (up to 8 mm / 0.31″), household appliances, 200L steel drums, aluminum engine castings, and copper/motor scrap—all processed through one fixed grate screen size. Pre-cutting thick girders on a Q91 gantry shear adds 20%–30% to hourly output, while feeding pre-torn bales from an HX-DS dual-shaft shredder increases production by 25%–40%.

  • Placeholder
    25-40 TPH Industrial Metal Crusher & Hammer Mill | 1200kW Scrap Crusher (PSX-1200)

    Export scrap terminals and steel-mill feeders producing ISRI 210 and ISRI 211 crushed steel at 200 to 320 tons per day need a hammer mill that won’t flinch when fed dense vehicle logs or 5–8 mm (0.20″–0.31″) mixed HMS. Built by Huaxin Co., Ltd., the PSX-1200 25-40 TPH scrap metal crusher couples a 1,200 kW (~1,600 HP) high-voltage (6kV/10kV/11kV) drivetrain to a heavily armored 2,200 mm (87″) wide rotor swinging 120–150 kg (265–330 lb) ZGMn18Cr2Mo hammers. It delivers 1.20–1.40 t/m³ (75–87 lb/ft³) low-copper furnace charge with <0.5% non-metallic content. What Feedstocks Can the 1,200 kW PSX-1200 Process? Designed as a high-capacity industrial metal crusher and hammer mill, the PSX-1200 processes whole ELV car bodies, compacted car logs, light-to-medium steel scrap bales, structural demolition iron, white goods, steel drums, aluminum castings, engine blocks, and large electric motors on a single 70–100 mm (2.8″–3.9″) grate configuration. Working in tandem with a Huaxin hydraulic shear raises crushing output by 20%–30%, and pairing with an upstream HX-DS2200 shredder boosts throughput by 25%–35%.

  • Placeholder
    30-50 TPH Heavy Duty Metal Crusher & Hammer Mill | 2500mm Scrap Crusher (PSX-1600)

    When daily processing targets reach 250 to 400 metric tons per shift (30–50 TPH) across flattened trucks, medium-density bales, and heavy mixed demolition scrap, a 2,200 mm (87″) throat becomes the limiting factor. Manufactured by Huaxin Co., Ltd., the PSX-1600 30-50 TPH scrap metal crusher expands the crushing chamber to a massive 2,500 mm (98″) clear width powered by a 1,600 kW (~2,150 HP) high-voltage motor and 150–180 kg (330–397 lb) ZGMn18Cr2Mo hammers. It produces 1.25–1.45 t/m³ furnace-ready crushed steel for regional EAF mills and export terminals. Unrestricted Multi-Material Crushing (2,500 mm / 98″ Chamber): The 1,600 kW PSX-1600 heavy duty metal crusher digests every major scrap category on one grate screen: compacted scrap metal bales, whole cars and pickup cabs, 6–10 mm (0.24″–0.40″) structural steel scrap, shipbreaking plate trims, white goods, 200L drums, cast-aluminum engines, and industrial motors. Pre-cropping heavy structural steel with our Q91 gantry shear increases output by 20%–30%, while tandem operation behind an HX-DS2600 dual-shaft shredder delivers a 25%–40% throughput gain.

  • Placeholder
    40-70 TPH Scrap Metal Crushing Machine for Mills | 2250kW Hammer Mill (PSX-3000)

    Designated the PSX-3000 for its 3,000 Horsepower class (2,250 kW) high-voltage main drive—and proven in our reference Malaysian EAF steelmaking charge plant—this 40-70 TPH scrap metal crusher from Huaxin Co., Ltd. is built for steelworks melt shops, deep-water export terminals, and tier-one car body crushers. Its 2,600 mm (102″) wide crushing chamber and 180–220 kg (397–485 lb) ZGMn18Cr2Mo hammers deliver 320–560 metric tons per shift of 1.30–1.50 t/m³ EAF charge. Full-Spectrum Mill & Terminal Feedstock Range: Built as a 2,250 kW (3,000 HP) scrap metal crushing machine, the PSX-3000 processes whole unflattened vehicles, No. 1 and No. 2 steel scrap bales, 10–12 mm (0.40″–0.47″) structural demolition iron, appliance scrap, steel drums, aluminum castings, and motor/Zorba scrap without changing grate screens between batches. Pre-sectioning oversized plate with our hydraulic gantry shear boosts output by 20%–30%, and running an upstream dual-shaft pre-shredder increases line capacity by 25%–35%.

  • Placeholder
    50-100 TPH Metal Recycling Crusher & Hammer Mill | 3000kW Scrap Crusher (PSX-4000)

    Designed for metropolitan auto-crushing hubs, deep-water export docks, and 100-ton+ EAF melt shops requiring up to 100 metric tons per hour (400–800 tons/day), the PSX-4000 50-100 TPH scrap metal crusher from Huaxin Co., Ltd. delivers 4,000 Horsepower (3,000 kW) of high-voltage impact energy inside a 2,600 mm (102″) wide super-heavy chamber. Swinging 220–260 kg (485–573 lb) ZGMn18Cr2Mo hammers on a Ø2,150 mm (Ø84.6″) capped rotor, it crushes whole vehicles, dense bales, and 12–15 mm (0.47″–0.59″) structural steel into 1.35–1.55 t/m³ premium furnace charge. Terminal-Scale Multi-Material Capability: Across 50 to 100 TPH shifts, the 3,000 kW (4,000 HP) PSX-4000 metal recycling crusher handles whole cars, SUVs, and truck cabs, dense HMS bales, 12–15 mm (0.47″–0.59″) structural steel scrap, white goods, aluminum engine scrap, and copper-bearing motor armatures on a single grate aperture (such as 80–120 mm / 3.1″–4.7″). Integrating a Huaxin hydraulic shear for oversized girders lifts hourly tonnage by 20%–30%, while an upstream heavy dual-shaft shredder boosts throughput by 25%–40%.