
13-16 TPH Aluminum & Engine Scrap Metal Crusher | 630kW Hammer Mill (PSX-630)
Proven in export reference installations across South Korea and Mexico, the PSX-630 13-16 TPH scrap metal crusher from Huaxin Co., Ltd. is our benchmark 630 kW (850 HP) high-voltage (6kV/10kV/11kV) hammer mill line in the 1,800 mm (71″) throat class. Built to operate either as a standalone car-shell & HMS heavy-duty metal crushers or directly behind an HX-DS2000/2200 twin-shaft pre-shredder, it swings 85–100 kg (187–220 lb) ZGMn18Cr2Mo hammers to produce 105–130 tons per shift of 1.15–1.35 t/m³ EAF charge alongside high-purity Zorba non-ferrous sorting. Ferrous & Non-Ferrous Multi-Material Coverage: Featuring “Aluminum & Engine” in the title highlights its 630 kW high-voltage torque and Zorba recovery line, but the PSX-630 spends just as much shift time operating as a car shell crusher, steel scrap crusher, scrap iron crusher, white goods crusher, metal drum crusher, and motor crusher. A single grate aperture handles all of these feedstocks continuously. Cropping oversized frames with a Huaxin shear boosts throughput by 20%–30%, while coupling an upstream HX-DS2000 dual-shaft shredder lifts output from 13–16 TPH to 16–19.5 TPH (+25% to 40%).
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Field-Proven Reference Architecture: The 630 kW High-Voltage Workhorse
If you look at our overseas reference plants—such as the pre-shredder + hammer mill ELV line commissioned in South Korea and the appliance/light-scrap sorting plant in Mexico—the PSX-630 (630 kW / 13–16 TPH) is the centerpiece. Why do experienced multi-yard operators specify the 630 kW high-voltage PSX-630 over lower-powered 1,800 mm (71″) machines?
First, stepping onto a dedicated 6 kV, 6.6 kV, 10 kV, or 11 kV utility motor cuts main stator current from ~1,000 amps (at 380V) down to just 42–68 amps. That eliminates copper busbar overheating and gives the rotor a 2.2× breakdown torque reserve when crushing compressed car shells, 4–8 mm (0.16″–0.31″) structural scrap, and cast-aluminum engine housings. Second, the PSX-630 upgrades hammer mass to 85–100 kg (187–220 lb), allowing it to run continuously at 13–16 TPH without pre-shredding, or 16–19 TPH when fed pre-ripped scrap from an upstream dual-shaft shredder.
Ferrous & Non-Ferrous Multi-Material Coverage: Featuring “Aluminum & Engine” in the title highlights its 630 kW high-voltage torque and Zorba recovery line, but the PSX-630 spends just as much shift time operating as a car shell crusher, steel scrap crusher, scrap iron crusher, white goods crusher, metal drum crusher, and motor crusher. A single grate aperture handles all of these feedstocks continuously. Cropping oversized frames with a Huaxin Q91-630 Shear boosts throughput by 20%–30%, while coupling an upstream HX-DS2000 Dual-Shaft Shredder lifts output from 13–16 TPH to 16–19.5 TPH (+25% to 40%).
Standalone PSX-630 vs. Tandem Pre-Shredder + PSX-630 Line Performance
| Operating Metric | Standalone PSX-630 Crushing Line | HX-DS2000 Pre-Shredder + PSX-630 Tandem Line |
|---|---|---|
| Net Ferrous Output | 13.0–16.0 TPH (105–128 TPD / 8h) | 16.0–19.5 TPH (130–155 TPD / 8h) |
| Accepted Feedstock | Depolluted flattened car shells, white goods, loose light iron ≤8 mm (0.31″) | Whole baled car logs, dense light-iron bales, aluminum engine blocks & mixed HMS |
| Specific Power Draw | 44–50 kWh / metric ton | 36–41 kWh / metric ton (smoother amperage curve) |
| Mn18Cr2Mo Hammer Lifespan | 3,500–4,800 tons per full set | 5,500–7,200 tons per full set (~38% lower wear cost/ton) |
| Finished Bulk Density | 1.10–1.28 t/m³ (68–80 lb/ft³) | 1.20–1.38 t/m³ (75–86 lb/ft³) uniform EAF spheres |
PSX-630 (630 kW / 13–16 TPH) Engineering Datasheet
| Parameter | PSX-630 High-Voltage Specification |
|---|---|
| Model & Throat Dimensions | PSX-630 (PSX630) | 1,800 mm (71″) width × 680 mm (26.8″) max pre-press opening |
| Main Motor & Switchgear | 630 kW (850 HP) | 6 kV / 6.6 kV / 10 kV / 11 kV (50/60 Hz) + Vacuum Circuit Breaker (VCB) & Liquid Resistance Starter |
| Auxiliary Downstream Power | ~95–135 kW (380V/415V/440V LV for apron feeder, hydraulics, vibrating pan, magnets, eddy current & baghouse fan) |
| Rotor & Hammer Assembly | Ø1,320 mm (Ø52″) capped disc rotor | 20–24 pcs ZGMn18Cr2Mo hammers (85–100 kg / 187–220 lb each) |
| Screen Grates & Ejection Door | 50–100 mm (2.0″–3.9″) Mn13Cr2 grates + hydraulic tramp-iron relief door + lateral hydraulic pin puller |
| Export Containers & HS Code | 4 × 40HQ Containers | Customs HS Code: 8479.8190 | Manufactured by Huaxin Co., Ltd. |
Complete Downstream Air-Suction, Magnetic & Zorba Sorting Architecture
At 15 tons per hour, manual picking alone cannot keep up with the non-ferrous metal stream liberated from car bodies and appliances. Huaxin Co., Ltd. supplies the PSX-630 as an integrated processing plant:
- Z-Box / Cascade Air Classifier & Pulse-Jet Baghouse: Positioned directly at the vibrating pan transition, controlled negative-pressure airflow lifts light crusher residue (foam, fabric, plastic film, wood splinters, and rubber dust) into a cyclone separator while heavy metal drops cleanly onto the magnetic transfer belt.
- High-Gauss Overband + Permanent Magnetic Drum: Pulls 98.5%+ clean ferrous nuggets onto a radial stacking conveyor for direct EAF mill delivery.
- Non-Ferrous Eddy-Current Separator (Zorba Recovery): The remaining non-magnetic fraction passes over a 3,000 RPM neodymium eddy-current rotor, ejecting cast aluminum, copper armatures, and brass fittings into a high-margin Zorba product bin while leaving stainless steel and heavy polymers on the Zurik tailing belt.
Compare Adjacent High-Voltage PSX Lines
- Entry 1,800 mm (71″) Model: PSX-560 (12–15 TPH, 560 kW).
- Need a 2,200 mm (87″) Throat for Unflattened Whole Vehicles? Step up to the PSX-900 (20–25 TPH, 900 kW) or PSX-1200 (25–40 TPH, 1,200 kW).
- Matched Tandem Pre-Shredder: HX-DS2000 Dual-Shaft Car Shell Shredder (15–42 TPH) or see all models on our Scrap Metal Crusher Pillar Page.
FAQ: PSX-630 (13–16 TPH) High-Voltage Hammer Mill Line
1. What transformer setup is required for the PSX-630 plant?
Most buyers feed the 630 kW main crusher motor directly from a 6 kV, 6.6 kV, 10 kV, or 11 kV high-voltage line (via our supplied HV vacuum switchgear and liquid-resistance starter cabinet), and use a small 160–200 kVA step-down transformer (380V/415V/440V) to power the auxiliary conveyors, hydraulic station, eddy-current rotor, and dust-collection fan.
2. Can the PSX-630 process cast-aluminum engine blocks and transmission cases?
Yes. Cast aluminum engine blocks (with steel crankshafts removed or pre-shredded) shatter rapidly inside the PSX-630 into clean 40–70 mm (1.6″–2.8″) aluminum chunks, while the magnetic drum automatically extracts all steel head bolts, valve seats, and cast-iron cylinder sleeves—producing furnace-ready twitch/tense aluminum scrap.
Request Reference Plant Videos & PSX-630 Quotation: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Page) to receive our South Korea/Mexico reference layouts and FOB/CIF pricing.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-630 (PSX630) |
| Hourly Capacity | 13-16 TPH (105-130 tons/day (8-hour shift)) |
| Inlet Width | 1,800 mm |
| Main Motor Power | 630 kW (High-Voltage 6kV / 10kV / 11kV) |
| Voltage System | 6kV / 6.6kV / 10kV / 11kV High-Voltage (3-Phase 50/60 Hz) |
| Output Fragment Size | 50-100 mm standard (30-120 mm customizable) |
| Crushed Steel Density | 1.15-1.40 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (80-95 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
