
9-12 TPH Steel Scrap Crusher for Foundry Charge | 450kW Hammer Mill (PSX-450)
Induction furnaces and ductile-iron foundries demand small 30–45 mm (1.2″–1.8″), high-density (>1.15 t/m³) steel nuggets free of paint and oil—yet installing a small-aperture grate screen on a standard hammer mill cuts hourly output by 30%. The PSX-450 9-12 TPH scrap metal crusher from Huaxin Co., Ltd. solves that retention bottleneck by putting our highest power density—450 kW (600 HP) and 65–80 kg (143–176 lb) ZGMn18Cr2Mo hammers—inside a heavily armored 1,600 mm (63″) chamber. It sustains 9–12 TPH (75–100 TPD) even through tight foundry grates while digesting 3–6 mm (0.12″–0.24″) plate punchings, cast-iron returns, and sheared auto stampings. Full-Yard Feedstock Capability: Foundry charge is only one side of the PSX-450. In daily scrap yard operation, this 450 kW steel scrap crusher processes mixed scrap iron, pre-cut car shells, household appliances, 200L steel drums, metal cans, cast-aluminum engine blocks, and industrial electric motors through the same grate screen (screen size only dictates final nugget density, never material compatibility). Pre-cutting heavy or long stock with our hydraulic shear improves output by 20%–30%, and tandem operation with our scrap metal shredder increases capacity by 25%–35%.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Why Small-Aperture Foundry Screens Require the 450 kW High-Power-Density Rotor
When you supply coreless induction furnaces or precision cast-iron foundries, furnace operators cannot charge 90 mm (3.5″) loosely folded sheet—it bridges across the crucible throat and causes slag blowouts. They specify tight 35–45 mm (1.4″–1.8″) spherical steel nuggets with a bulk density above 1.15 t/m³ (72 lb/ft³). However, fitting a 40 mm (1.6″) grate screen onto an underpowered crusher keeps metal inside the chamber twice as long, causing rotor heating and dropping throughput by a third.
Engineers at Huaxin Co., Ltd. developed the PSX-450 9-12 tph scrap metal crusher specifically for high-density foundry charge processors. By coupling a 450 kW (600 HP) main drive to a 1,600 mm (63″) rotor (281 kW per meter of rotor width—the highest power-to-width ratio in our mid-size series), the PSX-450 drives 3–6 mm (0.12″–0.24″) structural offcuts, brake-rotor stampings, and sheared car panels through fine foundry grates without losing hourly tonnage.
Full-Yard Feedstock Capability: Foundry charge is only one side of the PSX-450. In daily scrap yard operation, this 450 kW steel scrap crusher processes mixed scrap iron, pre-cut car shells, household appliances, 200L steel drums, metal cans, cast-aluminum engine blocks, and industrial electric motors through the same grate screen (screen size only dictates final nugget density, never material compatibility). Pre-cutting heavy or long stock with our Q91-500 Hydraulic Shear improves output by 20%–30%, and tandem operation with our HX-DS1500 Shredder increases capacity by 25%–35%.
Grate Aperture vs. Crucible Bulk Density & Output Matrix (PSX-450)
| Installed Grate Aperture | Finished Pellet Size | Bulk Density | PSX-450 Real Output | Target Furnace Buyer |
|---|---|---|---|---|
| 35 mm (1.4″) Fine Grate | 20–32 mm (0.8″–1.3″) | 1.20–1.35 t/m³ | 8.5–9.5 TPH | 1–5 ton coreless induction furnaces & ductile iron foundries |
| 50 mm (2.0″) Medium Grate | 30–45 mm (1.2″–1.8″) | 1.10–1.22 t/m³ | 10.0–11.5 TPH | 5–15 ton medium-frequency induction melt shops |
| 75 mm (3.0″) EAF Grate | 45–68 mm (1.8″–2.7″) | 0.95–1.10 t/m³ | 11.5–12.8 TPH | Electric arc furnaces (EAF) & export HMS/ISRI 211 blenders |
PSX-450 (450 kW / 9–12 TPH) Core Mechanical Specifications
| Specification | PSX-450 Engineering Value |
|---|---|
| Model & Shift Capacity | PSX-450 (PSX450) | 9.0–12.0 TPH (72–100 TPD / 8h shift; up to 190 TPD / 2 shifts) |
| Feed Opening & Pre-Press Roll | 1,600 mm (63″) width × 580 mm (22.8″) hydraulic twin-cylinder compression throat |
| Main Motor & Starting System | 450 kW (600 HP) | 6kV/10kV HV VCB starter or 380V–440V LV with Liquid Resistance Starter (LRS) |
| Hammer Alloy & Pin Puller | 18–20 pcs ZGMn18Cr2Mo hammers (65–80 kg / 143–176 lb each) + hydraulic pin extractor |
| Chamber Wear Armor | 50–60 mm (2.0″–2.4″) ZGMn13Cr2 work-hardening liners + hydraulic tramp-iron ejection door |
| Acceptable Scrap Wall Thickness | Up to 6.0 mm (0.24″) mild steel offcuts, stamping skeletons, cast-iron housings & pre-cut auto scrap |
| Shipping & Customs HS Code | 3 × 40HQ Containers | HS Code: 8479.8190 | Spare Castings HS: 8479.9090 |
Built for Continuous Two-Shift (16-Hour/Day) Thermal Stability
Longer residence time inside a fine-grate crushing chamber generates intense frictional heat, warming both the steel nuggets (up to 65–80°C / 149–176°F) and the main rotor shaft. To support 16-hour daily foundry production without bearing seizure, the PSX-450 incorporates three heavy-duty thermal and structural safeguards:
- Circulating Oil-Lubricated Spherical Roller Bearings with PT100 Interlocks: Heavy-duty SKF/ZWZ spherical roller bearings sit outside the dust zone in split pillow-block housings with forced oil cooling and real-time PT100 temperature monitoring on the Siemens HMI touchscreen.
- Stress-Relieved Ribbed Frame & Damped Spring Isolators: The lower housing is welded from Q355B heavy plate, annealed in a large stress-relief furnace at our Zunhua plant to prevent weld cracking, and mounted on heavy coil-spring vibration dampers.
- Dual-Stage Magnetic Separation Option: Foundry buyers cannot tolerate stray copper wire in ductile iron heats (copper above 0.08% ruins spheroidization). We can configure the PSX-450 discharge line with a primary overband magnet plus a secondary permanent magnetic drum and manual/eddy-current picking station to guarantee furnace-grade purity.
Model Selection Context
- Standard 8–12 TPH Commercial Yard Model: PSX-400 (400 kW, 1,600 mm / 63″ throat).
- Need a Wider 1,800 mm (71″) Throat for Flattened Car Bodies? Step up to the PSX-560 (560 kW, 12–15 TPH) or PSX-630 (630 kW, 13–16 TPH).
- Pre-Cutting Heavy Plate >6 mm (0.24″): Pair with a Q91-500 500T Gantry Shear or view all models on our Scrap Metal Crusher Pillar Page.
FAQ: PSX-450 Foundry Charge Hammer Mill
1. Can the PSX-450 crush cast-iron engine blocks?
It can crush cast-aluminum engine blocks, transmission housings, brake calipers, and thin-wall gray iron castings directly. However, solid heavy diesel cast-iron engine blocks contain forged steel crankshafts that act as uncrushable tramp iron. Always break full cast-iron blocks first in a slow-speed HX-DS1500 Dual-Shaft Shredder or pull the crankshaft before feeding the PSX-450.
2. How do we start a 450 kW motor if our grid is 380V/415V low-voltage?
For 380V/400V/415V sites with a 630 kVA transformer, Huaxin Co., Ltd. supplies a closed-loop Liquid Resistance Starter (LRS) with a wound-rotor motor (or a high-capacity VFD). The LRS limits starting inrush current to less than 1.3× rated full-load amps, preventing voltage dips across your plant.
Request Your PSX-450 Foundry Line Proposal: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Form) for custom grate sizing and a 24-hour factory quote.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-450 (PSX450) |
| Hourly Capacity | 9-12 TPH (72-100 tons/day (8-hour shift)) |
| Inlet Width | 1,600 mm |
| Main Motor Power | 450 kW |
| Voltage System | 380V/415V/440V Low-Voltage or 6kV/10kV High-Voltage |
| Output Fragment Size | 45-90 mm standard (30-120 mm customizable) |
| Crushed Steel Density | 1.05-1.35 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (65-80 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
