200 Ton Gantry Shear – 200 Ton Scrap Metal Shear
This 200 ton gantry shear cuts rebar, light beams, pipe and plate offcuts into furnace-ready lengths for small yards. One operator runs the 200 ton scrap metal shear on PLC auto cycle while an excavator or grapple loads the 4–5 m feed box.
- 2,000 kN force, mild steel plate up to 25 mm
- 2.0–4.5 t/h, 20–45 t per 10-hour day
- 22–30 kW (2×22 kW option); electric, generator or diesel
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The Q91-200 is a 200 ton gantry shear for small scrap yards, delivering 2,000 kN of force and up to 45 t of cut steel a day. As a 200 ton scrap metal shear, it replaces torch and alligator-shear work on rebar, light sections and plate offcuts. One operator runs it.
200 Ton Gantry Shear: Key Specifications
| Item | Q91-200 |
|---|---|
| Shearing force | 200 t (2,000 kN) |
| Blade length | 1,100 mm or 1,200 mm |
| Motor power | 22–30 kW, 2×22 kW option |
| Output | 2.0–4.5 t/h, 20–45 t/day |
| Max plate (continuous, mild steel) | 25 mm |
| Feed box length | 4 m / 4.5 m / 5 m |
| Cycle time | 20–30 s per cut |
| Voltage | 230V / 380V / 400V / 415V / 440V / 480V, 50 or 60 Hz |
| Drive options | Electric motor, generator or diesel engine |
| Blade steel | M6V, H13, X45 or D2 tool steel, four-edge reversible |
| Control | PLC auto cycle, remote control, emergency stop |
| Certification | CE, ISO 9001 |
Figures assume ten working hours. Loose, bulky light iron fed by a small excavator lands near 20 t/day, because the box fills by volume long before it fills by weight. Pre-sorted rebar, pipe and plate offcuts loaded with a grapple push the same machine toward 45 t/day.
200 Ton Scrap Metal Shear Applications
Think of this machine as a daily cutter for the material a small ferrous yard actually receives. Construction rebar, light beams, angle iron and workshop skeleton scrap make up most of its diet. Our guide on what a 200 ton scrap metal shear cuts goes through typical yard loads in more detail.
| Handles well | Keep out of the box |
|---|---|
| Rebar and round bar, loose or bundled, up to Ø65 mm | Mild steel plate thicker than 25 mm |
| Light and medium H-beams and I-beams | Continuous heavy melting steel (HMS 1 & 2) as the main intake |
| Angle steel, channel and other light profiles | Heavy structural sections over about 60 mm |
| Light steel pipe, single or in small bundles | Oversized bundles that overfill the 4–5 m feed box |
| Plate offcuts up to 25 mm, stamping skeletons, general light scrap | Non-metal waste, sealed tanks and anything under pressure |
Occasional HMS is fine. A yard where HMS is the daily norm should size up, as the comparison further down shows. Rebar-heavy sites can read our note on the rebar cutting shear at 200 ton. Loads that mix sheet, stampings and short pipe are a different job, covered in mixed light scrap on a 200 ton shear.
How the 200 Ton Scrap Metal Shear Works
- Your yard’s own loader fills the 4–5 m feed box, usually a small excavator with a scrap grapple. No feeding crew is needed.
- The lid closes and a hydraulic pusher cylinder moves the load forward to the cut length set on the PLC.
- The hold-down cylinder clamps the material against the bed so loose rebar and thin profiles cannot kick up during the stroke.
- The blade comes down, cuts, and returns, about every 20 to 30 seconds. Next length moves up.
On a 200 t frame the hold-down matters more than the headline force. If light bars are not pinned, part of each stroke is lost bending them instead of cutting. That clamp is what turns 2,000 kN into clean, even charge lengths.
Frame, Hydraulics and PLC Control
Frame and welding
This is a full guillotine-type gantry design, scaled down from the larger Q91 machines rather than a lighter separate concept. Frame, cutting chamber and guards are wear-resistant steel plate. Welding uses automated and manual cells with stress relief, and each shear is load-tested in Tangshan before it ships.
Blades and blade length
You can order M6V, H13, X45 or D2 tool steel. Four edges each. Because each blade is turned three times before it is replaced, one set typically handles about 5,000 to 10,000 t on this shear. Choose the 1,100 mm blade for compact yards and short stock. The 1,200 mm blade suits loads with longer beams and bundles.
Hydraulic system
A high-speed hydraulic circuit designed by HUAXIN drives the main cylinder. It holds a 20–30 s cycle at steady pressure, even when the box is packed with tangled rebar and the pusher fights friction for hours. Sealed valve blocks reduce leaks and pressure loss, which are the usual causes of unplanned stops on budget shears.
PLC, remote and safety
Separate PLC presets cover rebar, sections and mixed light scrap, so changing material takes one button. The operator works from a handheld remote at a safe distance from the blade. Excess hydraulic pressure trips an automatic stop. An emergency stop is fitted as standard.
Power options
Few need more. Motor choice runs from 22 kW to 30 kW, or 2×22 kW for busier grid-connected yards. Sites on a generator or diesel drive usually take the lower rating. Send your transformer capacity and we will match the package before production starts.
Choosing a 200 Ton Gantry Shear or a Larger Model
| Item | Q91-200 | Q91-315 | Q91-400 |
|---|---|---|---|
| Shearing force | 200 t (2,000 kN) | 315 t (3,150 kN) | 400 t (4,000 kN) |
| Max plate (continuous) | 25 mm | 30 mm | 40 mm |
| Output | 2.0–4.5 t/h, 20–45 t/day | 2.5–4.5 t/h, 25–45 t/day | 3.5–5.5 t/h, 35–55 t/day |
| Feed box | 4 / 4.5 / 5 m | 4.5 / 5 m | 5 / 5.5 / 6 m |
| Bales | No | No | No |
Size by material. If plate between 25 and 30 mm turns up every week, the Q91-315 has the margin. Yards with steady beam and 40 mm plate work, or a need above 45 t/day, belong on the Q91-400. A shear that spends its whole working life cutting right at its rated limit will wear through blades, seals and pump parts noticeably faster than one with margin. All sizes are listed in the Q91 hydraulic gantry shear series.
Shipping and Setting Up a 200 t Shear
Your quotation fixes the build slot, packing method and Incoterm in one document. EXW, FOB and CIF all work. Customs code: HS 8462.3990. Yards in very cold or very hot regions can ask for a climate-adapted build.
Many buyers of this size handle setup in-house using our wiring and hydraulic checklists and a video call at first start. If this is your first automated shear, we can send an engineer for installation, commissioning and crew training instead. Warranty on the 200 t model is 12 months. Spare blades and seals are kept in stock.
Why Buy a 200 t Shear From HUAXIN
Since 1989 our team has designed, welded and tested scrap machinery in its own plants in Tangshan (Hebei) and Maanshan (Anhui). Buyers deal with one company from quotation to spare parts, supported by a South Korean service office and more than 20 travelling engineers. Shears go out CE and ISO 9001 marked to 30+ countries.
200 Ton Gantry Shear FAQ
Is a 200 ton gantry shear enough for my yard?
It suits yards handling 20–45 t of light ferrous per 10-hour day: rebar, light beams, pipe and plate offcuts. If your incoming scrap is mostly HMS or thick plate, a 315 t or 400 t model will last longer and cut faster per load.
How thick a plate can a 200 ton scrap metal shear take?
25 mm mild steel, continuously. Plan around it. Material regularly over 25 mm should go to the Q91-315 (30 mm) or the Q91-400 (40 mm) rather than push this frame at its limit.
Can it run without a strong grid connection?
Yes. The machine can be built for an electric motor, a generator set or a diesel engine, and for 230V to 480V at 50 or 60 Hz. With modest site power, the 22 kW configuration is the usual choice.
Why does daily output vary from 20 to 45 tons?
It depends on density, loading speed and cut length. Fluffy light iron fills the 4–5 m box by volume long before it reaches any useful weight, so a full day of it gives only about 20 t. Dense sorted rebar and offcuts, loaded quickly by grapple, approach 45 t/day.
What does a 200 ton gantry shear need on site before delivery?
Plan a level concrete pad, the power supply you specified, and an excavator or grapple crane for loading. Foundation details are confirmed with the quotation for your chosen blade length and feed box.
Tell us what scrap you buy and what power the yard has through the HUAXIN contact form, and a written offer for the 200 t shear follows within 48 hours.
Additional information
| Machine Type | Hydraulic Scrap Metal Gantry Shear Machine |
|---|---|
| Model No. | Q91-200 |
| Shearing Force | 200Ton |
| Material Processed | Light and Medium Scrap Metal |
| Application | Scrap Metal Recycling |
| Industry | Scrap Recycling (small-scale) |
| Automation | Full Auto |
| Drive System | Hydraulic |
| Brand | HUAXIN |
| Origin | China |
| Certification | CE ISO9001 |







