
Scrap Metal Shredder for Sale | Dual-Shaft 1-60 TPH
Factory-Direct Pricing from China’s Trusted Industrial Shredder Manufacturer (1–60+ TPH)
Engineered for low-speed, high-torque shearing and tearing, the HUAXIN HX-DS scrap metal shredder is a dual-shaft (twin-shaft) metal shredder (1–60 TPH) — not a high-speed hammer mill car fragmentizer. Driven by twin planetary gearboxes with M6V, H13, or Hardox 500 alloy blades, it pre-shreds whole car bodies, metal bales, 200L drums, and non-ferrous scrap with zero fly-rock.
Search Products
Product Categories
Need Help?
Call Us: +86 15900363543
Email: [email protected]
WhatsApp: Available 24/7
Our Scrap Metal Shredder Products
High-Torque Industrial Shredder Engineering & Blade Manufacturing
Manufactured at our specialized Maanshan Shredder & Blade Plant (50+ industrial units/year), every HUAXIN scrap metal shredder utilizes low-speed, high-torque counter-rotating shafts fitted with interlocking M6V, H13, or Hardox 500 alloy blades (50–62 HRC) to tear, shear, and liberate bulky scrap into uniform furnace or separator feed.
Unlike single-stroke guillotine shears, a continuous rotary shredding system increases bulk density by 3–5x while freeing trapped plastics, rubber, and non-ferrous metals—maximizing recovery efficiency across downstream magnetic drums, eddy current separators, and scrap metal crushers.
Every unit is built with forged alloy shafts (minimum Ø300 mm), split-type bearing housings for rapid blade indexing, PLC auto-reverse overload protection, and our industry-leading 3–5 year structural warranty on the main welded frame.
Types of Scrap Metal Shredder Machines
Double-Shaft Shredder (HX-DS Dual-Shaft Series)
Serving as the primary workhorse in global scrap yards, the HX-DS dual-shaft scrap metal shredder operates two parallel counter-rotating hexagonal shafts driven by twin motors and planetary gearboxes. Interlocking multi-claw blades hook and shear whole car shells, steel drums, and tangled wire at 15–80 RPM without requiring a bottom screen—eliminating screen blinding when processing ductile or oily metals.

- Ideal Feedstock: Depolluted ELV car bodies, white goods, 200L steel drums, aluminum extrusions, copper wire bundles, light HMS
- Drive Power & Capacity: 2×37 kW to 2×400 kW (74–800 kW total) | 2 to 60 tons/hour across HX-DS800–HX-DS2600 models
- Output Fragment Size & Speed: 50–300 mm (determined by blade thickness and hook profile) | 15–80 RPM low-speed high-torque
- Key Engineering Edge: Screenless discharge prevents jamming; PLC current-sensing auto-reverse clears tramp metal in milliseconds
Single-Shaft Shredder
When downstream copper granulation, eddy current sorting, or smelting demands a strict upper particle size limit, the single-shaft design pairs one high-inertia rotor with a horizontal hydraulic push ram and an interchangeable bottom sizing screen. Material is repeatedly pressed against the rotor knives until fragments are small enough to pass through the screen apertures.

- Ideal Feedstock: Aluminum profiles, copper-aluminum radiators, purged cable harnesses, CNC metal turnings, WEEE plastic-metal housings
- Drive Power & Capacity: 22 kW to 200 kW | 0.5 to 10 tons/hour
- Output Fragment Size: 30–150 mm (strictly controlled by bolt-on screen mesh diameter)
- Key Engineering Edge: Four-way indexable bolt-on rotor knives; hydraulic swing-down screen cradle for 15-minute screen changes
Four-Shaft Shredder (Quad-Shaft Series)
Combining the aggressive grab of a twin-shaft unit with the calibrated sizing of a screen, the four-shaft configuration arranges two upper pre-cutting rotors above two lower fine-shearing rotors and a bottom sizing grate. Bulky hollow e-waste or confidential hardware is pulled down and liberated into fine, uniform particles in a single pass without needing a secondary crusher.

- Ideal Feedstock: E-waste (PCBs, server racks, hard drives), lithium-ion battery casings, composite aerospace/automotive offcuts
- Drive Power & Capacity: 30 kW to 400 kW (quad planetary gearboxes) | 0.5 to 6 tons/hour
- Output Fragment Size: 20–80 mm single-pass liberation
- Key Engineering Edge: Upper shafts force-feed the lower fine cutters, eliminating bridging of hollow server cabinets and appliance shells
Primary Pre-Shredder
Feeding whole unflattened vehicles or dense scrap bales directly into a high-speed hammer mill causes severe rotor shock spikes and explosive risks. Installed at the head of large recycling lines, the ultra-low-speed (5–25 RPM) hydraulic pre-shredder rips whole car bodies and industrial bundles into 200–600 mm slabs—exposing sealed gas tanks or tramp steel safely while reducing downstream hammer mill wear by over 40%.

- Ideal Feedstock: Whole ELV car bodies, baled light scrap, oversized white goods, tangled structural HMS
- Drive Power & Capacity: 500 kW to 900 kW (dual hydraulic piston motor or heavy electric drive) | 5 to 40 tons/hour
- Infeed Throat & Output Size: 1,500×1,000 mm to 3,000×2,000 mm throat | 200–600 mm coarse pre-sized slabs
- Key Engineering Edge: Extreme tramp-metal immunity with hydraulic pressure-relief auto-reverse; protects downstream secondary shredders
HX-DS Series Technical Parameters (Dual-Shaft Models)
The table below details our standard HX-DS double-shaft scrap metal shredder specifications. Custom chamber widths, blade thicknesses (20–100 mm), and hydraulic drives are engineered to order:
| Model | Twin Motor Power (kW) | Chamber Length (mm) | Throughput (t/h) |
|---|---|---|---|
| HX-DS800 | 2×37, 2×45, or 2×55 | 800 | 2–6 |
| HX-DS1000 | 2×55, 2×75, or 2×90 | 1,000 | 3–10 |
| HX-DS1200 | 2×90, 2×110, or 2×132 | 1,200 | 5–15 |
| HX-DS1500 | 2×110, 2×132, or 2×160 | 1,500 | 8–20 |
| HX-DS1800 | 2×132, 2×160, or 2×185 | 1,800 | 10–36 |
| HX-DS2000 | 2×160, 2×185, 2×200, or 2×250 | 2,000 | 15–42 |
| HX-DS2200 | 2×160, 2×185, 2×200, or 2×250 | 2,200 | 20–50 |
| HX-DS2600 | 2×200, 2×250, 2×315, or 2×400 | 2,600 | 25–60 |
| Reference FOB Price Band | $18,000 – $290,000 USD (FOB Tianjin, chamber & gearbox dependent) | ||
| Industrial Voltage & Grid Matching | 380V/400V/415V (50Hz) or 440V/480V (60Hz) 3-Phase; 6kV/10kV HV & Cummins Diesel options | ||
| Foundation & Layout CAD Drawings | Certified 2D/3D Civil Foundation & Electrical Drawings Included Within 3 Days of Deposit | ||
| Delivery Time & Warranty | 30–45 Days Factory Delivery | 12-Month Mechanical Warranty & 48h DHL/FedEx Spares | ||
* Throughput ratings reflect light-to-medium ferrous and non-ferrous scrap. Actual hourly output varies by material wall thickness, bulk density, blade hook width, and crane/conveyor feeding continuity.
Industrial Applications & Material Liberation Solutions
From regional scrap collection yards to automated EAF melt shops, HUAXIN rotary shredding systems are configured around your specific feedstock and downstream sorting line:

Scrap Yards & Metal Recycling Centers
Bulky, unshredded light steel and tangled wire quickly choke yard storage and waste trailer capacity. Installing an HX-DS1200 to HX-DS2000 dual-shaft unit converts mixed sheet scrap, drums, and light HMS into uniform 100–250 mm fragments—increasing bulk density by 3–5x and preparing clean feed for overband magnetic separation.
Automotive Recycling (ELV Dismantling)
Once fluids, batteries, and fuel tanks are removed, end-of-life vehicle (ELV) shells and cast aluminum engine blocks require high-torque size reduction. Heavy-duty HX-DS1800–HX-DS2600 twin-shaft shredders tear complete car bodies and subframes into fist-sized pieces, liberating steel, aluminum, and copper for downstream hammer mill crushing and eddy current sorting.
White Goods & Household Appliances
Refrigerators, washing machines, and HVAC units contain valuable steel cabinets, copper motors, and aluminum coils locked inside polyurethane foam and plastic shells. Counter-rotating M6V/H13 cutters strip appliance casings into 100–200 mm strips so magnetic drums and air classifiers can separate ferrous sheet, non-ferrous metals, and light fluff in one continuous pass.
E-Waste (WEEE) & Server Destruction
Maximizing copper, gold, and palladium recovery from printed circuit boards (PCBs), hard drives, and telecom racks requires tight particle sizing without thermal degradation. Four-shaft and screen-equipped single-shaft units reduce WEEE hardware to calibrated 25–50 mm fragments ready for optical or electrostatic separation.
Steel Mills & Foundry Charging
Electric arc furnaces (EAF) and induction furnaces suffer from bridging and uneven melt rates when charged with long, tangled scrap. Pre-shredding light structural offcuts and turnings to 80–150 mm raises charging bucket density and accelerates furnace tap-to-tap times, cutting kWh consumption per ton of liquid steel.
Stamping, Machining & Factory Offcuts
Automotive stamping plants, pipe mills, and CNC shops generate continuous streams of skeleton trimmings, bushy turnings, and rejected castings. In-line shredders reduce bushy steel swarf and skeletons to compact chips, feeding directly into horizontal scrap metal balers or briquetting presses for coolant recovery and premium mill resale.
Copper Cable & Radiator Pre-Shredding
Feeding tangled armored cables or thick copper-aluminum radiators straight into a fine granulator causes severe rotor stalling and screen wear. A dedicated single-shaft or HX-DS1000 double-shaft pre-chopper cuts tangled wire harnesses into 50–100 mm segments, doubling the hourly output of downstream copper granulators.
Oil Drums, Paint Buckets & Steel Barrels
Crushing 200-liter chemical drums and paint cans at high speed risks frictional sparks, whereas low-speed (15–30 RPM) high-torque shearing eliminates ignition hazards. Shredded drum strips can be washed, magnetically separated, and compacted into high-density furnace bales.
How to Select the Right Industrial Metal Shredder
Matching a scrap metal shredder to your recycling line requires balancing feedstock wall thickness, hourly tonnage, target fragment size, and drive torque:
Match Shredder Type & Blade Material to Your Feedstock
- Light mixed scrap (cans, thin sheet, wire, small appliances): HX-DS800 / HX-DS1000 double-shaft or single-shaft model (45–110 kW) fitted with M6V or H13 blades (20–40 mm thickness).
- Medium scrap (steel drums, radiators, aluminum profiles, light ELV parts): HX-DS1200 / HX-DS1500 dual-shaft model (180–320 kW) with 50–75 mm H13 alloy blades.
- Heavy scrap (depolluted car bodies, cast aluminum engine blocks, thick drums): HX-DS1800 to HX-DS2600 heavy-duty twin-shaft shredder (264–800 kW) with 75–100 mm H13 or Hardox 500 multi-claw blades.
- E-waste / WEEE requiring fine single-pass sizing (20–50 mm): Four-shaft shredder with bottom sizing grate.
- Thick structural beams, heavy plate (>15 mm), or long rebar: Do not feed solid heavy structural steel into a rotary shredder—section it first with a hydraulic scrap metal shear.
Size by Hourly Throughput Target
- Small yards (2–6 tons/hour): HX-DS800 double-shaft shredder (2×37 to 2×55 kW)
- Medium lines (5–20 tons/hour): HX-DS1000, HX-DS1200, or HX-DS1500 dual-shaft shredder
- High-capacity ELV & appliance plants (15–42 tons/hour): HX-DS1800 or HX-DS2000 heavy-duty shredder
- Large steel mill & regional hubs (25–60+ tons/hour): HX-DS2200 or HX-DS2600 system paired with a chain-plate apron conveyor
Electric Planetary Gearbox vs. Hydraulic Drive Selection
- Dual electric motors + planetary gearboxes: Delivers the highest mechanical transmission efficiency and lowest kWh cost per ton processed—standard across HX-DS800 through HX-DS2600 models.
- Low-speed hydraulic piston motor drive: Provides stepless speed regulation and cushion relief against extreme shock loads—recommended for 500–900 kW primary pre-shredders handling whole vehicles or dense bales.
Why Choose HUAXIN Scrap Metal Shredders?

Maanshan Shredder & Blade Factory (30+ Years)
Founded in 1989, HUAXIN operates a dedicated Shredder & Alloy Blade Plant in Maanshan (50+ industrial shredders/year) alongside our Tangshan headquarters, backing every main welded frame with an industry-leading 3–5 year structural warranty.

Factory-Direct Pricing & In-House Machining
Because we forge, heat-treat, and CNC-machine our own shafts, cutting chambers, and blades in-house without trading company markups, you receive heavy-duty industrial shredding equipment at 20%–35% below equivalent market rates.

CE & ISO 9001 Certified Engineering
Every HUAXIN shredder undergoes 100% full-load commissioning with client video verification prior to shipment:
- Forged alloy steel hexagonal/octagonal shafts (never welded) with minimum Ø300 mm diameter
- Vacuum heat-treated blades — Raw Materials: M6V, H13, and Hardox 500 with 50–62 HRC hardness
- Outboard split-type bearing housings for rapid, crane-accessible shaft and blade removal
- Stress-relieved Q345B/Q355B heavy plate cutting chamber construction
- Siemens/Schneider PLC control cabinet with automatic overload reverse protection

Global Service & 48-Hour Wear Parts
Operating across 30+ countries—supported by our South Korea service subsidiary and 20+ field engineers—we stock standard M6V, H13, and Hardox 500 blades, distance rings, counter-knives, and bearing assemblies for 48-hour express courier dispatch.

Complete Turnkey Line Integration
We engineer and supply complete downstream sorting lines integrated with your shredder:
- Heavy-duty chain-plate infeed conveyors and hydraulic push-ram feeders
- Overband magnetic separators and permanent magnet drums (ferrous recovery)
- Eccentric-rotor eddy current separators (aluminum, copper, and brass recovery)
- Zig-zag air classifiers and cyclone pulse-jet dust collection systems
- Downstream PSX hammer mill crushers or hydraulic scrap metal balers

Lifecycle Engineering Support
- Free sample material testing and blade hook profile recommendation
- Custom 3D CAD yard layout and civil foundation drawings
- Timestamped full-load factory testing videos prior to balance payment
- Remote PLC diagnostics, on-site engineer installation, and operator training
- 12-month full-machine warranty + 3–5 year main frame warranty + lifetime support
Inside Our Scrap Metal Shredder Design Process & China Direct Sourcing Guide
Buying an industrial dual-shaft scrap metal shredder is never an off-the-shelf catalog purchase—a shredder that runs smoothly at 15 TPH on empty 200L drums will stall immediately on compacted bales or thick cast aluminum if the blade thickness, hook geometry, and gearbox torque ratio are not engineered around your exact gate intake.
- Step 1 — Engineering From Your Gate Material & Middle-of-the-Band TPH: Never size a shredder so your daily target sits at 100% of the theoretical ceiling. HUAXIN engineers size your HX-DS chamber length (800 mm to 2,600 mm) and twin motor kilowatts so your required shift tonnage sits comfortably in the middle of the machine’s continuous band.
- Step 2 — Custom 2D/3D Blueprints Before Cutting Steel: Once you send us photos of your scrap mix, maximum piece dimensions, and desired output strip width, our Tangshan design institute produces custom 2D/3D general arrangement drawings—specifying rotary disc diameter, M6V/H13/Hardox 500 knife thickness (~100 mm for heavy metal vs. 20–40 mm for thin foil/plastics), and axial shim clearance (up to 8 mm for brittle castings).
- Step 3 — In-House CNC Machining, Mortise-and-Tenon Welding & FAT Verification: Every HX-DS shredder frame uses interlocked mortise-and-tenon steel plates, forged 40Cr/42CrMo hexagonal shafts, outboard dust-isolated spherical roller bearings, and dual-stage overload protection (Siemens PLC current-sensing auto-reverse + sacrificial nylon shear pins), verified via a live factory test video before ocean shipping.
Dual-Shaft Shredder Metallurgy & ELV Line Engineering Guides
Deepen your technical evaluation with Huaxin Co., Ltd.’s engineering analyses on cutter disc steel, planetary vs. hydraulic drives, and pre-shredding workflows:
- Shredder Cutter Metallurgy: M6V vs. H13 vs. Hardox 500
- Why an 1,800 mm Chamber Width (HX-DS1800) Is the Standard for Uncrushed Car Bodies
- Choosing Claw Blade Thickness (40–120 mm) & Hook Count on a Twin-Shaft Shredder
- How PLC Current Sensing & Auto-Reverse Protect Shredder Gearboxes
- Shredder Shafts, Cutter Discs & Customs HS Code 8479.8190 Guide
Scrap Metal Shredder FAQ
Q1: How do I choose the right blade thickness and claw profile for my shredder?
Q2: What is the difference between a shredder and a shear for scrap metal?
Q3: What materials can a HUAXIN shredder process?
Q4: How much does an industrial scrap metal shredder cost?
Q5: What are the shredder blades made of and how long do they last?
Q6: What is the throughput capacity of the HX-DS double-shaft series?
Q7: When do I need a primary pre-shredder before a secondary shredder or crusher?
Q8: How does the PLC auto-reverse system protect the machine from jamming?
Q9: What is the typical manufacturing lead time and warranty coverage?
Q10: Can a shredder be integrated into a complete turnkey sorting line?
Planetary Gearbox Maintenance, Blade Care & Troubleshooting
Shift Inspection & Gearbox Lubrication Schedule
- Planetary gearbox oil specification: Fill drive reducers with ISO VG220 / CLP220 heavy-duty industrial gear oil. Perform the initial oil change after the first 250–300 operating hours, and every 2,000–2,500 hours thereafter.
- Outboard split bearing housing greasing: Pump high-temperature lithium-complex grease (NLGI 2) into all four main rotor spherical roller bearings daily; verify labyrinth dust seals for metal fines ingress.
- PLC auto-reverse & thermal sensor check: Test dual-station emergency stops and verify PLC over-current reverse relay response before each shift; keep gearbox oil temperature below 65°C.
Blade Gap Calibration & Hardfacing Refurbishment
- Cutter-to-spacer clearance setting: Maintain axial clearance between interlocking M6V / H13 / Hardox 500 blades and fixed scraper combs within 0.5–1.5 mm. Re-shim immediately if side clearance exceeds 2.0 mm to prevent thin sheet metal from wrapping around the hexagonal shaft.
- Hardfacing & shaft locknut torque: Check main shaft locknuts and tie-rod bolts weekly with a calibrated torque wrench. Refurbish worn blade hook tips via hardfacing overlay welding before wear reaches the base alloy body.
- Feedstock screening: Remove sealed LPG cylinders, pressurized fire extinguishers, solid forged axles, and heavy railway plates prior to conveyor loading.
Troubleshooting Common Operational Issues
| Symptom | Root Engineering Cause | Corrective Action |
|---|---|---|
| Machine stalls without auto-reversing | PLC current-transformer threshold miscalibrated or contactor relay fault | Switch to manual reverse to clear the chamber; recalibrate Siemens/Schneider PLC overload relay amperage threshold |
| Sheet metal tearing or wrapping on shaft | Excessive axial blade-to-blade gap (>2 mm) or rounded hook tips | Re-shim axial distance rings to 0.5–1.5 mm clearance; hardface or replace worn M6V/H13 cutter disks |
| Hourly throughput drops by >25% | Worn blade hook profile slipping on bulky scrap, or uneven crane feeding | Restore hook bite angle via grinding/hardfacing; regulate apron conveyor VFD speed for steady infeed |
| Planetary gearbox temperature >70°C | Low VG220 gear oil level, clogged cooling fan, or continuous overload cycling | Top up or replace ISO VG220 gear oil, clean reducer cooling fins, and reduce batch feed size |
| Abnormal rotor vibration or knocking | Loose shaft locknut, worn spacer ring, or broken scraper comb bolt | Lock out power (LOTO), re-torque main shaft locknut and comb bolts, inspect split bearing housing play |
Customer Success Stories

Case 1: Double-Shaft Shredder Line in Anhui, China
- Model: HX-DS1500 Double-Shaft Shredder (2×132 kW)
- Material: Mixed white goods, 200L steel drums, light ferrous scrap
- Throughput: 12–15 tons/hour
- Output Size: 150–250 mm uniform furnace feed
- Commissioned: 2019

Case 2: Twin-Shaft Shredder for E-Waste in Japan
- Model: HX-DS800 Twin-Shaft Shredder (2×37 kW)
- Material: Mixed e-waste (WEEE): server housings, PCBs, hard drives, cables
- Throughput: 2.0–4.5 tons/hour
- Output Size: 40–60 mm for downstream copper granulation
- Commissioned: 2021

Case 3: Heavy-Duty Shredder + Crusher Line in South Korea
- Models: HX-DS2200 Dual-Shaft Shredder (2×250 kW) + 630 kW Hammer Mill Crusher
- Material: Depolluted ELV car bodies, large appliances, mixed industrial scrap
- Throughput: 25–35 tons/hour (complete integrated line)
- Integration: Chain conveyor + magnetic drum + eddy current separator + dust collector
- Commissioned: 2023
Need live shredding test videos or customer references in your country?
Related Scrap Metal Recycling Equipment
Build a complete processing line by pairing your shredder with our scrap metal crushers, hydraulic scrap metal shears, and scrap metal balers:




















