
3-5 TPH Metal Drum & Can Scrap Metal Crusher | Hammer Mill (PSX-200)
Small feeder yards and drum recyclers rarely have a 10 kV high-voltage substation on site, yet loose 200-liter (55-gallon) oil drums and 0.5–2.5 mm (0.02″–0.10″) stamping skeletons eat up trailer volume fast. Manufactured by Huaxin Co., Ltd. (HUAXIN), the PSX-200 3-5 TPH scrap metal crusher runs directly off a standard 380V/400V/415V/440V low-voltage transformer (315 kVA) via a 200 kW (270 HP) main motor. Its 1,400 mm (55″) hydraulic pre-press feed throat collapses hollow barrels before they reach the 580–650 RPM rotor, where 35–45 kg (77–99 lb) ZGMn18Cr2Mo cast manganese hammers and 30–60 mm (1.2″–2.4″) grate screens turn painted tin into clean 0.85–1.15 t/m³ (53–72 lb/ft³) foundry pellets at 24–40 tons per 8-hour shift. Material Range & Pre-Sizing Rules: Don’t let the “Drum & Can” headline fool you—the PSX-200 is a multi-purpose scrap metal crusher that processes empty 200L steel drums, metal cans, light scrap iron, stamping offcuts, aluminum scrap castings, copper-wound electric motors, and bicycle frames directly through a single standard grate screen (such as 50 mm / 2.0″ or 70 mm / 2.8″). It can also process car shells, household white goods, and thicker structural steel scrap, provided those oversized materials are pre-cut with our hydraulic shear or pre-ripped by an HX-DS dual-shaft shredder first to fit the 1,400 mm (55″) throat. Pre-shearing boosts hourly output by 20%–30%, while tandem pre-shredding lifts throughput by 25%–40%.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Why Small Feeder Yards Choose a 200 kW Low-Voltage Hammer Mill Over Baling
Baling painted 200-liter (55-gallon) chemical drums or galvanized HVAC ductwork traps paint, oil residue, and plastic liners inside the bundle. Foundries and electric arc furnaces (EAF) penalize or reject those contaminated bales. The PSX-200 3-5 tph scrap metal crusher solves that metallurgical problem at the entry level: high-velocity hammer impact strips surface coatings, liberates trapped non-ferrous fittings, and rolls thin sheet into dense, fist-sized steel spheres (0.85–1.15 t/m³) that command premium crushed-scrap pricing.
Most hammer mills require expensive 6 kV or 10 kV utility switchgear. Engineers at Huaxin Co., Ltd. designed the PSX-200 around a high-efficiency 200 kW (270 HP) 4-pole low-voltage motor paired with a closed-loop soft-starter or variable-frequency drive (VFD). Any industrial yard with a 315 kVA three-phase transformer (380V/400V/415V/440V, 50/60 Hz) can bolt the line down and start crushing within days.
Material Range & Pre-Sizing Rules: Don’t let the “Drum & Can” headline fool you—the PSX-200 is a multi-purpose scrap metal crusher that processes empty 200L steel drums, metal cans, light scrap iron, stamping offcuts, aluminum scrap castings, copper-wound electric motors, and bicycle frames directly through a single standard grate screen (such as 50 mm / 2.0″ or 70 mm / 2.8″). It can also process car shells, household white goods, and thicker structural steel scrap, provided those oversized materials are pre-cut with our Q43-200 Alligator Shear or pre-ripped by an HX-DS800 Dual-Shaft Shredder first to fit the 1,400 mm (55″) throat. Pre-shearing boosts hourly output by 20%–30%, while tandem pre-shredding lifts throughput by 25%–40%.
PSX-200 (3–5 TPH) Engineering Datasheet & Electrical Requirements
| Parameter | PSX-200 Factory Specification | Yard Planning Note |
|---|---|---|
| Model & Hourly Capacity | PSX-200 | 3.0–5.0 TPH (24–40 TPD / 8h shift) | 5 TPH on 60 mm (2.4″) grate; 3.2 TPH on 30 mm (1.2″) foundry grate |
| Feed Throat Opening | 1,400 mm (55″) width × 450 mm (18″) max compressed height | Accepts two 200L drums side-by-side or 1,200 mm (48″) sheet skeletons |
| Main Crusher Motor | 200 kW (270 HP) | 380V/400V/415V/440V Low-Voltage | Total line connected load ~245 kW; recommended 315 kVA transformer |
| Rotor & Hammer Assembly | Ø980 mm (Ø38.6″) rotor | 12–16 pcs ZGMn18Cr2Mo hammers (35–45 kg / 77–99 lb each) | 580–650 RPM | 42CrMo forged shaft + lateral hydraulic pin extractor |
| Discharge Grate Aperture | 30–60 mm (1.2″–2.4″) standard (customizable up to 80 mm / 3.1″) | Modular Mn13Cr2 grate segments swapped via top hydraulic hood |
| Acceptable Wall Thickness | 0.4–3.0 mm (0.016″–0.12″) mild steel sheet, drums & light profiles | Solid bar, plate >5 mm (0.2″), or uncrushed car shells prohibited |
| Containerized Shipping & HS Code | 2 × 40HQ Containers | Customs HS Code: 8479.8190 / 8479.8999 | Spare hammers & liners ship under HS 8479.9090 within 5–15 days |
How the PSX-200 Eliminates Drum Kickback and Motor Stalls
Drop an empty 200-liter steel drum straight onto a spinning rotor without pre-compression and it will bounce on top of the hammer circle, creating deafening noise and zero throughput. On the PSX-200, incoming scrap rides up a 6.5-meter variable-frequency chain-plate apron conveyor into a toothed hydraulic pre-press feed roller.
Driven by dual hydraulic cylinders and a high-torque cycloidal reducer, that roller crushes hollow drums down to a flat 120–180 mm (4.7″–7.1″) slab and meters it steadily against the stationary primary anvil bar. If a dense bundle causes main motor amperage to climb past 92% of rated current, the Siemens S7-1200 PLC automatically pauses the apron conveyor for 3 to 5 seconds until the rotor clears the burden—preventing breaker trips completely.
Feedstock Acceptance Guide & Wear-Part Economics
- Ideal Profitable Feedstocks: Depolluted 200L oil/paint/chemical drums, tin cans, 0.5–2.5 mm (0.02″–0.10″) punch press skeletons, corrugated roofing sheets, bicycle/motorcycle frames (tires removed), and small appliance shells.
- Materials That Require Upstream Pre-Cutting: Tangled wire coils or long structural angles should be sectioned first on a Q43-200 200T Alligator Shear; bulky sealed drums with chemical residue should be cold-punctured on an HX-DS800 Dual-Shaft Shredder (2–6 TPH).
- Hammer & Liner Lifespan: Each set of ZGMn18Cr2Mo water-toughened hammers processes 1,200–1,800 tons before flipping to the reverse striking edge, and 2,600–3,600 tons per full replacement set (translating to ~$1.15–$1.45/ton in wear cost). With the standard hydraulic pin puller, two mechanics flip all hammers in 90 minutes.
Step-Up Comparison Within the Compact PSX Series
- Current Model — PSX-200: 1,400 mm (55″) throat | 200 kW | 3–5 TPH for light drums and <2.5 mm (0.10") sheet.
- Need 40% More Torque on the Same 1,400 mm (55″) Footprint? Step up to the PSX-280 (5–6 TPH, 280 kW) for thicker appliance frames and car doors.
- Processing Wide Refrigerators & Washing Machines? Move to the 1,600 mm (63″) throat PSX-315 (6–8 TPH, 315 kW) or view our complete Scrap Metal Crusher Pillar Guide.
Buyer FAQ: PSX-200 3–5 TPH Scrap Metal Crusher
1. Can the PSX-200 remove paint and galvanizing from steel drums?
It removes paint, rust, paper labels, and loose coatings effectively. High-speed impact inside the grated chamber delaminates brittle paint and rust scales, which are then drawn off by the optional cyclone + pulse-jet baghouse dust collector while the downstream permanent magnet drum pulls out clean steel nuggets (96–98% metallic purity). True metallurgical zinc coating (galvanizing) remains alloyed to the steel, though loose zinc dust is extracted.
2. How deep is the concrete foundation required for the PSX-200?
Unlike massive steelworks hammer crushers that need 3-meter deep pits, the PSX-200 installs on a straightforward reinforced concrete pad (600–800 mm / 24″–32″ slab thickness under the main mill with rubber-spring vibration isolators). Huaxin Co., Ltd. supplies stamped civil load drawings within 72 hours of order confirmation.
Request a PSX-200 Factory Quotation & 2D Layout: Contact Sales Manager Leon Li at Huaxin Co., Ltd. via email ([email protected]), WhatsApp (+86 159 0036 3543), or our Factory Contact Page to receive an itemized FOB/CIF quotation and transformer checklist within 24 hours.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-200 (PSX200) |
| Hourly Capacity | 3-5 TPH (24-40 tons/day (8-hour shift)) |
| Inlet Width | 1,400 mm |
| Main Motor Power | 200 kW |
| Voltage System | 380V / 400V / 415V / 440V (50/60 Hz Low-Voltage 3-Phase) |
| Output Fragment Size | 30-60 mm standard (30-120 mm customizable) |
| Crushed Steel Density | 0.85-1.15 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (35-45 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
