1000 Ton Gantry Shear – 1000 Ton Scrap Metal Shear
The 1000 ton gantry shear (Q91-1000) cuts compacted scrap bales, heavy HMS and thick plate on one line for steel mills and regional scrap hubs. This 1000 ton scrap metal shear is the first Q91 model rated for baled scrap.
- 10,000 kN force, 100 mm mild steel plate continuously
- 10–12 t/h, 100–120 t per 10-hour day
- 3×45 kW or 4×45 kW, electric, generator or diesel drive
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
Steel mills, melt shops and regional scrap hubs that must cut compacted bales and thick plate on one line buy the Q91-1000, our 1000 ton gantry shear. With 10,000 kN behind the blade, it sizes 100–120 tons of furnace-ready charge over ten working hours. Mild steel plate to 100 mm is daily work for this 1000 ton scrap metal shear.
1000 Ton Gantry Shear: Key Specifications
| Item | Q91-1000 |
|---|---|
| Shearing force | 1,000 t (10,000 kN) |
| Blade length | 1,800 mm or 2,000 mm |
| Motor power | 3×45 kW (135 kW) or 4×45 kW (180 kW) |
| Output | 10–12 t/h, 100–120 t/day |
| Max plate (continuous, mild steel) | 100 mm |
| Feed box length | 6 m / 6.5 m / 7 m |
| Cycle time | 20–35 s per cut |
| Baled scrap | Yes |
| Voltage | 230V / 380V / 400V / 415V / 440V / 480V, 50 or 60 Hz |
| Drive options | Electric, generator or diesel |
| Blade steel | M6V, H13, X45 or D2 tool steel, four-edge reversible |
| Control | PLC auto cycle, remote control, emergency stop |
| Certification | CE, ISO 9001 |
Treat the tonnage row as a ten-hour figure. Dense bales and long HMS pieces push it toward 120 t, while light mixed loads, frequent heavy plate and a slow grapple crane drag it toward 100 t.
1000 Ton Scrap Metal Shear Applications: Bales, Heavy Plate and HMS
This is the smallest model in the Q91 line rated for compacted bales, typically blocks of 400×400 mm to 600×600 mm in section shipped in from satellite yards. Below this tonnage, a shear lacks the hold-down force to keep a dense block flat, so it rolls under the blade and jams the slide. Plate is the second job. At 1,000 t the machine also handles shipbreaking hull plate in the 80–100 mm range. Breaker yards can read more in hull plate and structure on a 1000 ton shear.
| Material | How the 1000 ton scrap metal shear handles it |
|---|---|
| Light-steel and non-ferrous bales | Cut into dense blocks; the cut opens the bale so hidden inclusions show |
| HMS 1 & 2 | Continuous duty, cut to charging-bucket length |
| Mild steel plate | Up to 100 mm continuously, including ship plate |
| H-beam, I-beam, box girders | Heavy structural and bridge sections |
| Angle and channel | Loose or bundled profiles |
| Thick-wall pipe | Large-diameter casing, drill pipe, bundled tubing |
| Rebar | Tangled mats, dense bundles, demolition cages with concrete still attached |
| Vehicle and rail scrap | Flattened car bodies, truck chassis, railcar side panels |
| Mill returns | Foundry risers, billet crops |
Keep plate above 100 mm off this machine as a daily diet. Yards that cut thicker plate all day, or need more than 120 t/day, should size up a step.
How the 1000 Ton Scrap Metal Shear Works
- Loading starts with a crane or material handler dropping scrap into the open 6–7 m feed box; side cylinders then fold inward and press wide sections and bales into a compact log.
- The vertical hold-down cylinder pins the charge against the lower anvil.
- The main cylinder drives the upper blade down, with a differential fast-advance valve speeding up light strokes inside the 20–35 s cycle.
- As the blade lifts, the rear pusher indexes the material forward by a length set on the PLC, and cut pieces fall into the bucket or onto the ground.
Bales justify this tonnage. A dense block behaves like a spring; the hold-down ram has to clamp it before the blade touches it. Separate bale-breaking equipment and the crew it needs are no longer required, because the shear opens the bale and sizes it in one pass. Concrete clinging to demolition rebar gets crushed by the clamping cylinders before the cut. Yards planning a baler and a shear side by side should read pairing a baler with a 1000 ton shear.
1000 Ton Gantry Shear Multi-Pump Hydraulics and Frame
Frame
The gantry frame is welded from heavy Q355B structural plate and then annealed in a large furnace, which removes the internal stress that welding leaves in sections this thick. That matters at 10,000 kN. Each cut through a bale or 100 mm plate releases stored energy suddenly, and a stress-relieved frame resists weld fatigue far better. Inside the feed box, replaceable NM400 wear plates take the abrasion from bales and concrete-coated steel.
Hydraulics and cycle
Three or four 45 kW motors drive high-pressure axial piston pumps as a multi-pump group. Shock control comes next. Pre-decompression cartridge valves in the manifold bleed off peak cylinder pressure before the return stroke, which cuts shock in the pipework. Air or water oil coolers hold oil temperature below 55°C through summer running.
PLC, remote and safety
Cycle logic sits in a Siemens or Schneider PLC, so feed length and stroke sequence repeat without operator input. A wireless remote lets the operator stand clear of the box. Overload relief and an emergency stop come fitted.
Power supply
Motors start one after another through star-delta or soft-starter modules, which stops inrush current from pulling down the plant transformer as the pump group comes online. The cabinet is wired for your three-phase voltage at 50 or 60 Hz. Off-grid yards can run the 1000 t model from a 250–350 kVA diesel generator set.
Choosing a 1000 Ton Gantry Shear Over the 630 or 1250 t Models
| Item | Q91-630 | Q91-1000 | Q91-1250 |
|---|---|---|---|
| Shearing force | 630 t (6,300 kN) | 1,000 t (10,000 kN) | 1,250 t (12,500 kN) |
| Max plate (continuous) | 60 mm | 100 mm | 120 mm |
| Output | 6.0–8.0 t/h, 60–80 t/day | 10–12 t/h, 100–120 t/day | 16–20 t/h, 160–200 t/day |
| Feed box | 6 / 6.5 / 7 m | 6 / 6.5 / 7 m | 7 / 7.5 / 8 m |
| Bales | No | Yes | Yes |
All three machines come from the Q91 hydraulic gantry shear series. For a yard with no bales and plate under 60 mm, the Q91-630 handles loose HMS for less capital. Bales in the feed, or plate climbing toward 100 mm, point to the 1,000 t class. Beyond 120 t/day, or with 120 mm plate as routine work, the Q91-1250 fits better.
Foundation, Shipping and Commissioning
Shipping weight for a complete 1000 t machine is well over 80 tons. We split it at the factory into the gantry head, feed box walls, cylinder groups, hydraulic tank unit and control desk. These travel in 40HQ and 40FR flat-rack containers on EXW, FOB or CIF terms. Lead time and packing are confirmed in the written quotation.
Before the vessel arrives you receive civil foundation drawings, anchor bolt templates and a rigging plan. Plan for a 50 t+ mobile crane. Our engineers can supervise assembly, calibrate hydraulic pressure and train operators. The machine carries a 12-month warranty, and spare four-edge blades are supplied from the factory. For site layout, see our guide to 1000 t shear installation and site planning.
Why HUAXIN for a 1000 t Shear
Since 1989, Huaxin Co., Ltd. has made scrap metal machinery in two plants, Tangshan in Hebei and Maanshan in Anhui. Our South Korean subsidiary runs sales and after-sales, and 20+ field engineers look after HUAXIN shears in over 30 export markets. Every unit is put under load on our test bed before it leaves, then ships with CE and ISO 9001 papers under HS code 8462.3990.
1000 Ton Gantry Shear FAQ
Can this 1000 ton scrap metal shear cut bales straight from a baler?
Yes. Bales are part of its rating. Blocks of 400×400 mm to 600×600 mm section are clamped by the hold-down ram and cut into dense pieces. Yards often route thin sheet to a scrap metal baler and send bales and heavy steel to the shear.
What is the thickest plate it cuts every day?
Continuous duty is rated at 100 mm mild steel plate. That covers most ship plate from breaking yards, which typically runs 80–100 mm. If thicker plate is your daily feed rather than an occasional piece, compare the Q91-1250, rated at 120 mm.
How much power does a 1000 ton gantry shear need?
Installed motor power is 135 kW with three 45 kW motors or 180 kW with four, and staggered star-delta or soft starting limits inrush on your transformer. Sites without grid power can use a 250–350 kVA diesel generator set. Tell us your voltage and frequency when you ask for a quote.
Is 100–120 t/day realistic for my yard?
In most yards, yes. It is the rated range over a 10-hour day. Dense bales and long HMS fill each stroke well. Mixed light scrap, slow crane loading or frequent thick plate pull output toward the lower end, because each stroke then carries less steel or waits longer for the box to refill. We can model your tonnage from your actual bale share and loading method.
What foundation does the 1000 t model need?
It sits on a reinforced concrete foundation built to our civil drawings, with anchor bolts set from the template we send. Plan crane access for erection, since the gantry head needs a 50 t+ mobile crane. Drawings come early.
Send us your scrap mix, bale size and site power and get a written Q91-1000 quotation within 48 hours.
Additional information
| Machine Type | Hydraulic Scrap Metal Gantry Shear Machine |
|---|---|
| Model No. | Q91-1000 |
| Shearing Force | 1000Ton |
| Material Processed | Light, Medium and Heavy Scrap Metal |
| Application | Scrap Metal Recycling |
| Industry | Scrap Recycling (large-scale) |
| Automation | Full Auto |
| Drive System | Hydraulic |
| Brand | HUAXIN |
| Origin | China |
| Certification | CE ISO9001 |







