Showing 13–20 of 20 results
-
The Q91-400 is a 400 Ton scrap metal shear on a heavy-duty hydraulic gantry frame for established recycling companies running mixed ferrous intake of 35–55 tons per day. All-Round Ferrous Duty: plate, structural sections, rebar, pipes and car bodies sized on one machine. Cuts 40 mm Plate All Day: handles 55 mm sections occasionally without strain. One Machine, Not Two: replaces a pair of 315T shears with one power package, one control system and one operator. Honest Duty Boundary: continuous HMS 1 & 2 is a 630T job, and we will say so before you order. Matches for established scrap yards, metal recycling plants and fabrication offcut operations CE / ISO 9001 certified. Tell us your material mix and daily volume and we will quote within 48 hours.
-
The Q91-500 is a 500 Ton scrap metal shear built for demolition intake — building skeletons, bridge sections and plate with concrete still attached — at 45–60 tons of sized output per day. Demolition Duty Rated: frame, cylinders and blades specified for impact loading and abrasion, not just tonnage. Cuts 50 mm Plate All Day: takes 65 mm sections and the exceptional oversize member occasionally. Chamber Length Set to Your Furnace: charge size configured from your end-use. Matches for demolition contractors, structural offcut yards and furnace-feeding operations CE / ISO 9001 certified. Share your intake mix and daily volume for a quotation inside 48 hours.
-
The Q91-630 is a 630 Ton scrap metal shear built on a heavy-duty hydraulic gantry frame for continuous HMS duty in large scrap yards and steel mills. Continuous HMS 1 & 2: rated for round-the-clock mixed ferrous intake of 60–80 tons per day. Heavy-Duty Frame: stiffened gantry structure and oversized cylinders sized for heavy sections, not light offcuts. Blade Life Under Load: H13 or M6V tool steel at 56–62 HRC, four-sided reversible, with regrind intervals stated for continuous duty. Right-Size Guidance: if your intake is under 50 t/day, we will tell you to buy the 315T or 400T instead. Matches for large scrap yards, steel mills and metal processing plants running continuous ferrous intake CE / ISO 9001 certified. Send your material mix and daily volume for a quotation within 48 hours.
-
First commercial dual shaft scrap metal shredder for a growing yard. 3–10 tons per hour output from a 1000 mm chamber — the step above a workshop machine, still inside a small site’s power budget.
Motor options: 2×55 kW / 2×75 kW / 2×90 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 360–550 mm diameter, dense-tooth, 7-tooth or 9-tooth profiles.
Built in-house: blades machined in our own shop, a mortise-and-tenon reinforced chamber frame, and nylon-pin torque protection for the drive.
Best for: yards densifying mixed light intake, metal traders preparing graded fractions, two-shift fabrication waste, collection centres.
Not for: whole car bodies, structural steel in quantity or baled scrap.
Send scrap photos and thickness for a configuration recommendation and a free quotation within 48 hours.
-
Plant-scale dual shaft scrap metal shredder built to hold a stated output, not a peak figure. 5–15 tons per hour from a 1200 mm chamber — the community-scale commercial plant machine.
Motor options: 2×90 kW / 2×110 kW / 2×132 kW, dual motor drive, electric supply.
Blade options: M6V, H13 or Hardox 500, 360–550 mm diameter, 50–62 HRC.
Built in-house: in-house blade machining, mortise-and-tenon chamber frame reinforcement, nylon-pin torque safety.
Best for: community and municipal recycling plants, contract shredders, mid-size recyclers, plants feeding a furnace or mill.
Not for: whole car bodies or baled bundles — step up to the 1800 mm class.
Send your material analysis and we answer with a written output figure and a quotation, free, inside 48 hours.
-
The commercial recycler’s main machine: dual shaft scrap metal shredder rated 8–20 tons per hour from a 1500 mm chamber. Steel-dominant duty for mid-size plants with a tonnage target behind them.
Motor options: 2×110 kW / 2×132 kW / 2×160 kW, dual motor drive.
Blade options: M6V, H13 or Hardox 500, 360–550 mm diameter, 7-tooth and 9-tooth profiles for section and plate.
Built in-house: our own blade machining facility, the chamber frame reinforced with mortise-and-tenon joints, nylon-pin torque protection on the drive.
Best for: mid-size commercial plants, steel-dominant processors, export shredders to mill specification, demolition contractors at volume.
Not for: vehicle-dominated intake or baled bundles.
Send a material analysis and a written output figure plus free quotation follows within 48 hours.
-
Workshop-grade dual shaft scrap metal shredder for first-time mechanised shredding. 2–6 tons per hour output from an 800 mm chamber — sized for fabrication shops, small yards and non-ferrous collection points rather than for tonnage.
Motor options: 2×37 kW / 2×45 kW / 2×55 kW, dual motor drive, electric, generator or diesel.
Blade options: M6V, H13 or Hardox 500, 300–550 mm diameter, dense-tooth, 7-tooth or 9-tooth profiles.
Built in-house: blade machining facility, mortise-and-tenon reinforced chamber frame, nylon-pin torque protection for the reducer and motors.
Best for: sheet offcuts, stamping scrap, aluminum profiles, copper and brass, thin-wall containers and drums.
Not for: whole car bodies or baled scrap — step up to the 1800 mm class or larger.
Send your scrap photos and thickness for a configuration recommendation and a free quotation within 48 hours.
-
The Y81-125 125 Ton Scrap Metal Baler is a factory-direct hydraulic metal recycling press designed for small-to-mid-scale scrap yards and recycling stations. It efficiently bales UBC aluminum cans, copper wire, light mixed scrap, thin sheet steel and more into compact blocks of 200×200–300×300 mm at 0.8–1 ton per hour (8–10 t/day).
Powered by a 15kW motor at 25MPa, the Y81-125 is available in manual, semi-automatic, and PLC automatic control modes — with an optional diesel engine for off-grid sites. No foundation is required, making installation fast and flexible.
Available in turn-out (side tilt) and push-out discharge configurations. CE & ISO certified. Get a quote within 48 hours.
