
630 Ton Inclined Scrap Metal Shear (NS 630T) for Sale | HUAXIN
The NS 630T is the entry point into continuous inclined shearing from HUAXIN: a 630-ton (6,178 kN) gravity-fed scrap metal shear with a 1,200 mm (47.2″) blade and a single 135 kW (180 HP) motor, cutting 10–20 tonnes per hour of rebar, light structural profiles, steel pipe, and merchant bar. No rear pusher cylinder, no deep foundation pit — scrap slides down the inclined gravity chute to the guillotine throat while the crane keeps loading. Equipped with Mitsubishi PLC, Siemens main electrics, and a feeding box and blade length built to your yard. Request a factory quote.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
A First Inclined Shear for a Feeder Yard Stepping Up from Manual Cutting
Most scrap yards that invest in the NS 630T inclined scrap metal shear are coming from the same operational bottleneck: an alligator shear or a small manual cutter that can no longer keep pace with incoming long material. Rebar bundles, light structural profiles, and steel pipe arrive in 6-to-12 meter (20-to-40 ft) lengths, and every manual cut costs an extra crane or forklift handling pass. The NS 630T is the smallest model in our N-Series gravity-fed range—engineered specifically for feeder yards with 630 metric tons (6,178 kN) of guillotine shearing force, a 1,200 mm (47.2″) blade, and a single 135 kW (180 HP) motor driving the entire hydraulic circuit.
How the Gravity-Fed Chute Works (No Rear Pusher Cylinder)
There is no long rear hydraulic pusher cylinder on this machine. Scrap loads directly into the top of the open inclined feeding box—measuring 8.0 × 2.4 × 3.5 m (26.2 × 7.9 × 11.5 ft)—and slides down the stepped wear-lined chute toward the guillotine throat under its own weight. Lateral side-compression flippers and a vertical hold-down clamp densify the charge before each downward stroke of the blade, while sheared furnace lengths drop out below as the overhead magnet or grapple crane loads the next batch. Because loading and shearing run in parallel without waiting for a lid to close or a pusher ram to retract, cycle efficiency on free-flowing long stock far outpaces conventional horizontal boxes.
What the NS 630T Cuts — and What Belongs on Another Shear
While the NS 630T is widely deployed as a rebar shear and light profile shear, its 1,200 mm (47.2″) throat and side-squeeze flippers handle a broad mix of free-flowing ferrous scrap:
- Primary Long-Product Feedstocks: Deformed rebar bundles, merchant bar, angle iron, C-channels, light I-beams, steel scaffolding tubes, drill pipes, and light railway track offcuts.
- Secondary Free-Flowing Scrap: Narrow structural demolition trusses, straight plate trimmings, elongated stamping skeletons, and bundled wire rod coils.
- When to Choose Another Shear Type: Heavily tangled, rusty, or sharply bent HMS and bulky hollow car shells can bridge against inclined chute sidewalls. If your yard intake is predominantly tangled mixed demolition scrap or whole ELV car bodies, compare our pusher-fed Horizontal Container Shears (HC Series) or Heavy Gantry Guillotine Shears (Q91 Series).
Technical Specifications — HUAXIN NS 630T Inclined Shear
| Specification Item | NS 630T Parameter (Metric / Imperial) |
|---|---|
| Nominal Cutting Force | 630 Metric Tons (6,178 kN / ~694 US Short Tons) |
| Feeding Box Dimensions (L × W × H) | 8.0 × 2.4 × 3.5 m (26.2 × 7.9 × 11.5 ft) — sized to your yard layout |
| Guillotine Blade Length | 1,200 mm (47.2″ / 1.2 m) — built to order |
| Main Motor Power | 135 kW × 1 unit (180 HP single-motor hydraulic station) |
| Overall Machine Dimensions (L × W × H) | 10.0 × 4.2 × 5.5 m (32.8 × 13.8 × 18.0 ft) |
| Hourly Production Rate | 10–20 t/h (depends on scrap grade, bulk density, crane feed rate & cut length) |
| Four-Edge Blade Metallurgy | M6V, H13, X45, D2 alloy tool steels (reversible 4-edge blades) |
| PLC & Electrical Architecture | Mitsubishi PLC automatic control; Siemens main low-voltage switchgear |
| Line Integration Options | Heavy-duty outfeed scrap conveyor & magnetic separator (keeps the throat clear so the shear holds its rated output) |
Why 630 Tons Is the Economical Entry Point
At 10 to 20 tonnes per hour, a single 8-hour shift puts 80 to 160 tonnes of furnace-sized steel through the machine on suitable long feedstock. That is the exact volume threshold where a regional feeder yard stops paying for manual torch-cutting and starts running an automated line. The single 135 kW (180 HP) motor keeps electrical substation installation straightforward—one starter cabinet instead of a multi-motor cascade—and the compact 10.0 × 4.2 m (32.8 × 13.8 ft) footprint fits bays that cannot accommodate a 16-meter horizontal gantry shear and deep pusher pit. Pairing the discharge chute with a Huaxin outfeed stacking conveyor and magnetic separator prevents cut scrap from piling under the throat, so the shear keeps its rated output through the shift.
Frequently Asked Questions — NS 630T
Will the NS 630T handle rusty or slightly bent rebar bundles?
Light surface rust and mild bends flow smoothly down the wear-plated chute. Heavily knotted or sharply bent demolition bundles can bridge against chute sidewalls and require crane repositioning—if bent demolition steel makes up a major share of your daily tonnage, tell our engineering team before ordering so we can configure the optimal chute and side-press setup.
What electrical power supply does the NS 630T require?
A standard three-phase industrial supply (380V/400V/415V/440V, 50/60 Hz) sized for the 135 kW (180 HP) main motor plus control circuits. Send your local grid voltage with your RFQ and we will match the motor windings and soft-starter package prior to assembly.
Can the feeding box be made longer than 8 metres?
Yes. The 8.0 × 2.4 × 3.5 m box is the standard size; we build the box and blade length to your yard layout and longest regular piece. Send your longest profile with your RFQ and we will size the chute before quoting.
To price the NS 630T for your yard, send us your longest regular piece, the heaviest section you cut, and your daily tonnage — our engineers will confirm the chute size, blade length and motor package before quoting. Or start with the full inclined shear range if you are still comparing tonnages.






