
630 Ton Side Compression Shear (PS 630T) for Sale | HUAXIN
The PS 630T from HUAXIN is the step up in the press-and-shear range: 630 metric tons (6,178 kN) of shearing force, an 800–900 mm (31.5″–35.4″) cutting width, and three 125-ton lateral compression cylinders (375T total squeeze, up from two cylinders on the PS 500T) feeding a 650 × 220 × 100 cm (21.3 × 7.2 × 3.3 ft) tank. Three 55 kW motors (165 kW / 221 HP) drive up to 18 tonnes per hour of mixed ELV scrap, light structural steel, and domestic scrap.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The Third Compression Cylinder Is the Real Upgrade
When comparing the PS 500T to the PS 630T side compression shear, the headline difference is 130 additional metric tons at the guillotine blade. The working difference on your yard floor is the third 125-ton lateral compression cylinder. Where two cylinders squeeze a 550 cm box with 250 tons, three cylinders on the PS 630T fold a longer, wider 650 × 220 × 100 cm (21.3 × 7.2 × 3.3 ft) tank with 375 metric tons of lateral force—compressing bulky scrap down into a tight 650 × 75 × 60 cm (21.3 × 2.5 × 2.0 ft) log. That 50% jump in side-squeeze force is what lets the PS 630T crush and shear medium-gauge pieces that would stall a two-cylinder press.
Technical Specifications — HUAXIN PS 630T Side Compression Shear
| Specification Item | PS 630T Parameter (Metric / Imperial) |
|---|---|
| Nominal Cutting Force | 630 Metric Tons (6,178 kN / ~694 US Short Tons) |
| Guillotine Cutting Width | 800–900 mm (31.5″–35.4″) configurable |
| Open Feeding Tank Dimensions (L × W × H) | 650 × 220 × 100 cm (6,500 × 2,200 × 1,000 mm / 21.3 × 7.2 × 3.3 ft) |
| Compressed Log Dimensions (L × W × H) | 650 × 75 × 60 cm (6,500 × 750 × 600 mm / 21.3 × 2.5 × 2.0 ft) |
| Side Compression Cylinder Force | 3 × 125 T (375 Tons total lateral compression) |
| Longitudinal Pushing Force | 125 Metric Tons |
| Hydraulic Motor Group | 3 × 55 kW (165 kW / 221 HP tri-motor station) |
| Production Rate (Up To) | Up to 18 t/h (maximum; depends on material grade, bulk density & feed rate) |
| Four-Edge Blade Steel | M6V, H13, X45, D2 alloy tool steels |
What the PS 630T Handles
Built for general yards whose light scrap intake regularly includes medium-thickness pieces, the PS 630T delivers up to 18 tonnes per hour across:
- ELV & Automotive Dismantling Scrap: Depolluted car body halves, pickup truck beds, light van shells, automotive stamping skeletons, and bumper/chassis subframes.
- Light-to-Medium Structural & Industrial Scrap: Welded steel tanks, agricultural machinery frames, light structural angles and channels, steel pipes, white goods, and mixed municipal scrap.
- Configurable 800–900 mm Throat & Downstream Pairing: The cutting width can be specified at 800 mm (31.5″) for higher specific blade pressure on denser steel, or 900 mm (35.4″) for bulkier hollow loads. Feeding sheared PS 630T segments into a downstream PSX hammer mill crusher or HX-DS shredder keeps the downstream line fed with dense, uniform pieces.
Frequently Asked Questions — PS 630T
PS 500T or PS 630T — how should our yard decide?
Look at the heaviest and longest items arriving in a typical week. If your feed is strictly thin sheet and household appliances under 5.5 m length, the PS 500T is sufficient. If car body sections, 6-meter pipes, or medium structural offcuts arrive several times a week, the third compression cylinder and 650 cm tank on the PS 630T pay for themselves immediately in saved torch-cutting labor.
If car body sections and 6-meter pipes already show up several times a week, the third cylinder pays for itself in saved torch-cutting — that is the whole case for the PS 630T. Compare it with the PS 500T below or the PS 800T above, or request a factory quotation.
