500 Ton Side Compression Shear (PS 500T) for Sale | HUAXIN

The PS 500T from HUAXIN is the entry model of our press-and-shear range: 500 metric tons (4,903 kN) of cutting force, an 800 mm (31.5″) blade, and lateral press cylinders that squeeze bulky hollow scrap into a dense block before the blade touches it — so a compact 800 mm blade does the work of a much wider gantry throat. Two 125-ton compression cylinders, a 125-ton pusher ram, and two 55 kW motors (110 kW / 148 HP) deliver up to 10 tonnes per hour on light sheet, white goods, and ELV light fraction.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

Press First, Then Cut: How a Short 800 mm Blade Handles Bulky Scrap

A conventional gantry guillotine shear cuts whatever sits loose in the box. A side compression shear (press and shear) performs one critical mechanical step first: it squeezes the air out of the load. On the HUAXIN PS 500T, two 125-ton lateral compression cylinders fold and compress wide, hollow scrap inside the 550 × 200 × 90 cm (18.0 × 6.6 × 3.0 ft) open feeding tank down into a tight 550 × 70 × 50 cm (18.0 × 2.3 × 1.6 ft) steel log—and only then does the 125-ton pusher cylinder advance the compacted log under the 800 mm (31.5″) guillotine blade. Because the scrap is pre-densified to 700 mm width, the blade can be half the length of a standard gantry knife, cutting machine footprint, motor power, and capital cost while delivering clean, full-stroke cuts.

What the PS 500T Processes

Built for small-to-medium feeder yards and appliance/auto dismantlers whose daily intake is under 60–80 tonnes, the PS 500T handles a wide range of bulky, springy, and hollow scrap:

  • Primary Bulky & Hollow Feedstocks: Stamping sheet offcuts, household white goods (washing machine shells, refrigerator cabinets, HVAC housings), the light fraction of end-of-life vehicles (ELV fenders, doors, hoods, roofs), thin-walled steel tubing, and light welded frames.
  • Secondary Yard Scrap: Light farm machinery sheet, steel drums, supermarket shelving, bicycle frames, and light domestic structural iron.
  • Line Pairing & Output Synergy: Discharging sheared, pre-densified 500T scrap directly into a downstream PSX scrap metal crusher (hammer mill) or hydraulic scrap metal baler keeps the downstream crusher or baler fed with dense, uniform pieces by eliminating hollow voids. If your daily volume exceeds 80 tonnes or includes heavier vehicle chassis sections, step up to the 3-cylinder PS 630T Side Compression Shear.

Technical Specifications — HUAXIN PS 500T Side Compression Shear

Specification Item PS 500T Parameter (Metric / Imperial)
Nominal Cutting Force 500 Metric Tons (4,903 kN / ~551 US Short Tons)
Guillotine Cutting Width 800 mm (31.5″)
Open Feeding Tank Dimensions (L × W × H) 550 × 200 × 90 cm (5,500 × 2,000 × 900 mm / 18.0 × 6.6 × 3.0 ft)
Compressed Log Dimensions (L × W × H) 550 × 70 × 50 cm (5,500 × 700 × 500 mm / 18.0 × 2.3 × 1.6 ft)
Side Compression Cylinder Force 2 × 125 T (250 Tons total lateral squeeze)
Longitudinal Pushing Force 125 Metric Tons
Hydraulic Motor Group 2 × 55 kW (110 kW / 148 HP total)
Production Rate (Up To) Up to 10 t/h (maximum; depends on material grade, bulk density & feed rate)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels

Why Pressing Before Shearing Eliminates Blade Bridging

Loose sheet iron and hollow appliance shells are mostly empty air. Attempting to cut them in an uncompressed box causes thin metal to fold, spring back, and jam between the upper and lower knives. Squeezing the charge from 2,000 mm (78.7″) width down to a solid 700 mm (27.6″) log accomplishes three things simultaneously: it eliminates elastic spring-back against the blade, turns every guillotine stroke into a dense full-throat cut, and concentrates all 500 tons of force onto solid metal rather than empty space.

Frequently Asked Questions — PS 500T

Is the PS 500T the same as a shear baler?
No. A shear baler is built to eject finished rectangular bales as a primary product. The PS 500T compresses scrap inside the tank solely to make guillotine shearing dense and efficient—its output is furnace-ready sheared scrap lengths.

What materials should not be fed into the PS 500T?
Thick solid steel plate (>35 mm), heavy H-beams, railway rails, and solid cast iron blocks. Side compression cannot squeeze solid steel, and those heavy sections belong on our Q91 Gantry Shears or NS Inclined Shears.

To price the PS 500T, send us your bulkiest regular item, its longest dimension, and your daily tonnage — we will confirm the tank size and blade width before quoting. The full side compression range is here if you need a larger tank.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote