
8-12 TPH Scrap Metal Crusher & Hammer Crusher | 400kW Metal Crusher (PSX-400)
Crossing the 10-ton-per-hour (80–95 tons/day) threshold is the inflection point where a regional scrap yard transitions from a local collector to a direct steel-mill supplier. Built by Huaxin Co., Ltd., the PSX-400 8-12 TPH scrap metal crusher combines a 1,600 mm (63″) wide chamber with a 400 kW (540 HP) main drive and 60–75 kg (132–165 lb) ZGMn18Cr2Mo hammers. Unlike smaller drum mills, the PSX-400 has the shaft torque to break open low-density light-iron bales, sheared ELV body sections, and 3–5 mm (0.12″–0.20″) commercial steel scrap into 1.00–1.25 t/m³ furnace charge. One Hammer Crusher for Every Yard Stream: Whether your crane is loading commercial steel scrap, loose light-iron bales, depolluted white goods, sheared car shells, 200L metal drums, aluminum castings, engine housings, or copper-bearing motor scrap, the 400 kW PSX-400 digests them all on a single 60–80 mm (2.4″–3.1″) grate screen without hardware changes. Pairing the line with a Huaxin hydraulic shear to crop oversized beams increases net output by 20%–30%, while placing an HX-DS dual-shaft shredder upstream drives hourly production up by 25%–40%.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The 10 TPH Sweet Spot for Regional Commercial Scrap Yards
Why is the PSX-400 (8–12 TPH / 400 kW) one of the most frequently exported hammer mills from Huaxin Co., Ltd.? Because regional scrap processors handling 70 to 95 tons per shift face a tough capital equation: 200–315 kW machines cannot digest compressed light-iron bundles or 4 mm (0.16″) structural offcuts without slowing down, while jumping to a 2,200 mm (87″) whole-car heavy-duty metal crushers doubles both civil foundation and electrical substation costs.
By packing 400 kW (540 HP) of drive power and a heavier disc-and-cap rotor into a 1,600 mm (63″) wide housing, the PSX-400 hits the 10 TPH commercial sweet spot. It processes loose mixed yard iron, pre-sheared automotive panels, appliances, and low-density sheet bales in a single shift—filling three to four 30-ton highway trailers every day with clean, high-density (1.00–1.25 t/m³) crushed steel.
One Hammer Crusher for Every Yard Stream: Whether your crane is loading commercial steel scrap, loose light-iron bales, depolluted white goods, sheared car shells, 200L metal drums, aluminum castings, engine housings, or copper-bearing motor scrap, the 400 kW PSX-400 digests them all on a single 60–80 mm (2.4″–3.1″) grate screen without hardware changes. Pairing the line with a Huaxin Q91-400 Hydraulic Shear to crop oversized beams increases net output by 20%–30%, while placing an HX-DS1500 Dual-Shaft Shredder upstream drives hourly production up by 25%–40%.
What Changes Structurally Between 315 kW and the 400 kW PSX-400?
The PSX-400 is not simply a PSX-315 with a bigger motor bolted to the baseplate. To absorb the higher impact energy required for 8–12 TPH operation, our Zunhua and Tangshan engineering teams upgraded four critical mechanical assemblies:
- 60–75 kg (132–165 lb) High-Inertia ZGMn18Cr2Mo Hammers: Individual hammer weight increases by 20%, backed by chromium-molybdenum alloying (`Cr 1.8–2.2%`) that prevents hammer neck stretching when breaking open loosely baled sheet or thick appliance frames.
- Hydraulic Tramp-Iron Ejection Door (Emergency Anvil Door): When processing unsorted commercial yard scrap, an occasional uncrushable object (such as a solid 50 mm / 2.0″ forklift pin or heavy cast flange) will enter the mill. When the PLC acoustic/vibration sensor detects an uncrushable impact, a hydraulic relief cylinder pops the upper ejection door open in seconds—spitting out the tramp iron before it can crack a grate bar or bend the 42CrMo main shaft.
- 50 mm (2.0″) Box Armor & Reinforced Bearing Pedestals: Chamber wear plates step up to 50 mm (2.0″) cast manganese steel, and the main spherical roller bearings sit in water/oil-cooled cast-steel housings isolated from the crushing wall to prevent thermal expansion under 10-hour continuous shifts.
- Dual-Drive Hydraulic Pre-Press Roll (550 mm / 21.7″ Lift): Twin high-torque hydraulic motors drive the toothed upper feed roll, gripping springy wire mesh, roofing bundles, and crushed car roofs without slippage.
PSX-400 (8–12 TPH) Full Technical & Plant Specifications
| Technical Parameter | PSX-400 Specification |
|---|---|
| Model & Rated Output | PSX-400 (PSX400) | 8.0–12.0 TPH (65–95 tons per 8-hour shift) |
| Feed Throat Opening | 1,600 mm (63″) width × 550 mm (21.7″) max roller opening |
| Main Motor & Power Supply | 400 kW (540 HP) | 6kV / 10kV High-Voltage standard (or 380V–440V LV with LRS/VFD) |
| Total Plant Connected Power | ~465 kW (including VFD chain conveyor, pre-press hydraulics, vibrating pan, magnet & dust fan) |
| Hammers & Rotor | 16–20 pcs ZGMn18Cr2Mo hammers (60–75 kg / 132–165 lb each) | Hydraulic pin extractor |
| Grate Screen Aperture & Density | 40–90 mm (1.6″–3.5″) | Finished steel bulk density: 1.00–1.25 t/m³ (62–78 lb/ft³) |
| Target Feedstock Mix | Commercial light iron (up to 5 mm / 0.20″ thick), white goods, loose light-scrap bales, pre-sheared ELV panels, steel drums |
| Shipping & Customs HS Code | 3 × 40HQ Containers | HS Code: 8479.8190 | 1-Year Structural & Mechanical Warranty |
Operating Cost & ROI Snapshot for an 80-Ton/Day Yard
| Operating Cost Item | Typical Benchmark per Metric Ton Processed |
|---|---|
| Electricity Consumption | 38–46 kWh/ton (at 9.5 TPH average output on 60 mm / 2.4″ grates) |
| Hammer, Grate & Liner Wear Cost | $1.25–$1.60/ton (direct OEM replacement castings from Huaxin Co., Ltd.) |
| Direct Labor Requirement | 1 grapple crane operator + 1 PLC/picking-belt supervisor |
| Clean Shredded Scrap Price Premium | +$28 to +$45/ton over uncleaned loose light iron + 1.5–3% non-ferrous Zorba bonus |
Cross-Shopping Adjacent PSX Models
- Lighter 6–8 TPH Appliance Option: PSX-315 (315 kW, 1,600 mm / 63″ throat).
- Heavy Two-Shift Foundry Version (Same 1,600 mm / 63″ Throat): PSX-450 (450 kW, 9–12 TPH).
- Need a 1,800 mm (71″) Throat for Flattened Car Shells? See the PSX-560 (560 kW, 12–15 TPH) or compare all models on our Scrap Metal Crusher Pillar Page.
FAQ: PSX-400 (8–12 TPH) Commercial Hammer Mill
1. Can the PSX-400 break open baled scrap metal?
It can break open low-to-medium density light-iron packets (such as loose tin cans or thin sheet bales compressed by a small 125T–160T baler) especially when pre-loosened by a dual-shaft shredder. However, dense 600×600 mm (24″×24″) high-pressure HMS bales from a 400T+ baler should never be fed directly into a 400 kW hammer mill—breaking dense bales requires either an upstream HX-DS1500 Dual-Shaft Pre-Shredder or a 1,200 kW+ heavy-duty metal crushers (PSX-1200).
2. How does Huaxin Co., Ltd. handle overseas installation and commissioning?
We provide complete 2D/3D foundation blueprints, electrical schematics, and pre-wired PLC cabinets prior to arrival. Once the containers reach your yard and civil foundations cure, Huaxin Co., Ltd. dispatches senior mechanical and electrical engineers to your site for assembly verification, cold/hot load commissioning, and operator training.
Request a Custom PSX-400 Plant Quotation: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Us) to receive your site layout and FOB/CIF price breakdown.
Additional information
| Machine Type | Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series) |
|---|---|
| Model | PSX-400 (PSX400) |
| Hourly Capacity | 8-12 TPH (65-95 tons/day (8-hour shift)) |
| Inlet Width | 1,600 mm |
| Main Motor Power | 400 kW |
| Voltage System | 380V/415V/440V Low-Voltage or 6kV/10kV/11kV High-Voltage |
| Output Fragment Size | 40-90 mm standard (30-120 mm customizable) |
| Crushed Steel Density | 1.00-1.30 t/m³ |
| Hammer Material | Mn18Cr2 High-Manganese Cast Steel (60-75 kg per hammerhead (Mn18Cr2)) |
| Maintenance System | Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt |
| Standard Line Equipment | VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control |
| Optional Systems | Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter |
| Warranty & Delivery | 1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001 |
