1000 Ton Side Compression Shear (PS 1000T) for Sale | HUAXIN

The PS 1000T from HUAXIN is the first super-servo model in the press-and-shear range: 1,000 metric tons (9,806 kN) of cutting force, a 1,000–1,200 mm (39.4″–47.2″) cutting width, three 150-ton side compression cylinders (450T squeeze), and three 73 kW super servo motors driving up to 45 tonnes per hour. The super servo drive delivers 150%–200% of a standard motor’s effective output at the same kW rating, holding full cycle speed under heavy load.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

Where the Super Servo Drive Changes the Machine: 45 Tonnes per Hour

Up to 800 tons, our press-and-shear models run on standard induction motors. The PS 1000T side compression shear is the first model equipped with three 73 kW super servo motors (219 kW nominal)—and the engineering leap is not about nameplate kW, but how the hydraulic pumps behave under peak resistance. Rated at 150% to 200% of a standard motor’s output torque at equivalent power, the super servo drive prevents pump flow droop when the 850 cm tank is packed full and the 1,000-ton blade bites into dense structural steel. That sustained hydraulic velocity under load is where the jump from 25 t/h (on the PS 800T) to up to 45 tonnes per hour comes from.

Technical Specifications — HUAXIN PS 1000T Side Compression Shear

Specification Item PS 1000T Parameter (Metric / Imperial)
Nominal Cutting Force 1,000 Metric Tons (9,806 kN / ~1,102 US Short Tons)
Guillotine Cutting Width 1,000–1,200 mm (39.4″–47.2″) configurable
Open Feeding Tank Dimensions (L × W × H) 850 × 240 × 100 cm (8,500 × 2,400 × 1,000 mm / 27.9 × 7.9 × 3.3 ft)
Compressed Log Dimensions (L × W × H) 850 × 95 × 60 cm (8,500 × 950 × 600 mm / 27.9 × 3.1 × 2.0 ft)
Side Compression Cylinder Force 3 × 150 T (450 Tons total lateral squeeze)
Longitudinal Pushing Force 175 Metric Tons
Hydraulic Drive Group 3 × 73 kW Super Servo Motors (delivers 150%–200% output of normal motor at same power)
Production Rate (Up To) Up to 45 t/h (maximum; depends on material grade, bulk density & feed rate)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels

Buyer Profile and Scrap Mix at 1,000 Tons

Built for high-volume ELV dismantling hubs, EAF mill suppliers, and regional consolidation yards processing 200+ tonnes per day, every dimension of the PS 1000T steps up to handle heavier mixed scrap:

  • Heavy ELV, Truck Cabs & Containers: Whole passenger cars, SUVs, commercial truck cabs, shipping container panels, and large cylindrical steel tanks squeezed by 450 tons (3 × 150T) of lateral force inside the 2,400 mm (7.9 ft) wide tank.
  • Structural Steel & HMS 1/2: Demolition girders, heavy pipe bundles, shipbreaking stiffeners, and mixed heavy-light industrial scrap pushed by the 175-ton longitudinal ram through the 1,000–1,200 mm (39.4″–47.2″) blade.
  • Tandem Line Synergy: Feeding pre-densified, sheared PS 1000T logs into a high-voltage PSX-1600 Scrap Metal Crusher or Y81K Heavy Scrap Baler keeps the downstream crusher or baler fed with dense, uniform logs.

Frequently Asked Questions — PS 1000T

What does the 3 × 73 kW super servo drive change in daily operation?
Two things: cycle speed under heavy load and kWh energy efficiency per ton. Whereas standard induction motors lose speed or require unloading valves when system pressure peaks, the servo drive maintains high pump displacement during compression and shearing while dropping to near-zero idle power while the crane reloads the box.

Is 45 t/h achievable across all scrap grades?
45 t/h is the maximum catalogue rating on dense, well-fed mixed scrap. Actual shift output depends on material bulk density, cut length, and crane operator speed—send us your scrap mix and we will calculate your realistic shift figure. If your daily volume is under 180–200 tonnes, the PS 800T is the more economical choice.

To price the PS 1000T, send us your daily tonnage, your heaviest regular item, and your power supply details — we will confirm the servo drive configuration and tank size before quoting. The side compression range has the smaller models if 45 t/h is more than you need.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote