1000 Ton Inclined Scrap Metal Shear (NS 1000T) for Sale | HUAXIN

When a 630-ton line cannot keep up with incoming trucks, the NS 1000T from HUAXIN is the next step: 1,000 metric tons (9,806 kN) of cutting force, a 1,200 mm (47.2″) guillotine blade, three 110 kW motors (330 kW / 442 HP total), and 25–50 tonnes per hour on long structural profiles, heavy pipe, and merchant bar. Uses the same space-saving 8.0 × 2.4 × 3.5 m inclined gravity-feed chute as the 630T, backed by a high-flow tri-motor hydraulic station. Mitsubishi PLC and Siemens electrics throughout.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

When 630 Tons Stops Being Enough: Stepping Up to Tri-Motor Speed

The NS 1000T inclined scrap metal shear exists for one specific yard transition: your operation already processes long steel, mill orders have grown, and a single-motor shear has become the shift bottleneck. Moving from the NS 630T to the NS 1000T gives you 370 additional metric tons of blade force, but the decisive upgrade is hydraulic oil flow—three 110 kW motors (330 kW / 442 HP total) replacing a single 135 kW unit. On the exact same 10.0 × 4.2 m (32.8 × 13.8 ft) ground footprint, the NS 1000T takes the same long structural stock and clears it two to two-and-a-half times faster at 25 to 50 tonnes per hour.

Technical Specifications — HUAXIN NS 1000T Inclined Shear

Specification Item NS 1000T Parameter (Metric / Imperial)
Nominal Cutting Force 1,000 Metric Tons (9,806 kN / ~1,102 US Short Tons)
Feeding Box Dimensions (L × W × H) 8.0 × 2.4 × 3.5 m (26.2 × 7.9 × 11.5 ft) — sized to your yard
Guillotine Blade Length 1,200 mm (47.2″ / 1.2 m) — built to order
Main Motor Power 110 kW × 3 units (330 kW / 442 HP total hydraulic drive)
Overall Machine Dimensions (L × W × H) 10.0 × 4.2 × 5.5 m (32.8 × 13.8 × 18.0 ft)
Hourly Production Rate 25–50 t/h (depends on material grade, bulk density, feeding rate & cut length)
Four-Edge Blade Metallurgy M6V, H13, X45, D2 alloy tool steels
Controls & Switchgear Mitsubishi PLC automatic cycling; Siemens main electrical components
Recommended Line Pairing Infeed/outfeed scrap conveyor + magnetic separation drum (keeps the throat clear for continuous feeding)

What Changes at 1,000 Tons: Crane Pacing & Conveyor Integration

Shearing force is only half of the production equation; material handling is the other half. At 25 to 50 tonnes per hour, the loading crane sets the ceiling on hourly output, not the guillotine blade. For that reason, we normally configure the NS 1000T with an integrated scrap conveyor system (ferrous stacking conveyor + suspended magnetic separator). Continuous conveyor evacuation keeps the throat clear while the crane drops full grapple loads into the 8.0 m (26.2 ft) chute, so the shear holds its rated output instead of waiting on batch crane clearing. If your yard also processes thin loose sheet alongside structural steel, sheared offcuts can be routed downstream to a Huaxin hydraulic scrap metal baler or PSX hammer mill crusher.

Best-Fit Scrap Streams for the NS 1000T

Regional EAF mill suppliers and medium-to-large scrap processors use the NS 1000T across a wide range of long and medium-wall ferrous scrap:

  • Core Long Feedstocks: Rebar and merchant bar bundles, structural I-beams and H-sections, thick-walled steel pipe and casing tube, railway track offcuts, and straight bridge demolition girders.
  • Secondary Compatible Materials: Straight ship-frame ribs, elongated plate trimmings, and factory structural skeletons that slide freely down the gravity chute.
  • When to Choose a Pusher Box Instead: Highly entangled, rusty demolition scrap or wide hollow vehicle shells can bridge on any gravity chute. For yards whose daily mix is mostly tangled HMS or unflattened car bodies, see our PS 800T Side Compression Shear or Q91 Gantry Shears.

Frequently Asked Questions — NS 1000T

Can the NS 1000T operate across three continuous shifts?
Yes. The tri-motor (3 × 110 kW) hydraulic station is engineered with industrial oil cooling for 24-hour continuous duty, and the Mitsubishi PLC cycle runs automatically. Operators simply schedule four-edge blade rotation during shift handovers.

Is the feeding box the same size as the NS 630T?
Yes—both models share the 8.0 × 2.4 × 3.5 m (26.2 × 7.9 × 11.5 ft) standard chute. The jump in the NS 1000T comes from 1,000-ton shearing force and 330 kW hydraulic pump displacement. If your yard receives extra-long girders or heavy H-beams requiring a 10-meter box and 1.4-meter blade, step up to the NS 1250T.

The NS 1000T is the point in the range where the shear stops being the bottleneck and the crane becomes it — if your trucks already queue at the gate, this is the model. Compare it with the NS 630T below or the NS 1250T above, or send an RFQ with your material mix and daily tonnage.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote