40-70 TPH Scrap Metal Crushing Machine for Mills | 2250kW Hammer Mill (PSX-3000)

Designated the PSX-3000 for its 3,000 Horsepower class (2,250 kW) high-voltage main drive—and proven in our reference Malaysian EAF steelmaking charge plant—this 40-70 TPH scrap metal crusher from Huaxin Co., Ltd. is built for steelworks melt shops, deep-water export terminals, and tier-one car body crushers. Its 2,600 mm (102″) wide crushing chamber and 180–220 kg (397–485 lb) ZGMn18Cr2Mo hammers deliver 320–560 metric tons per shift of 1.30–1.50 t/m³ EAF charge. Full-Spectrum Mill & Terminal Feedstock Range: Built as a 2,250 kW (3,000 HP) scrap metal crushing machine, the PSX-3000 processes whole unflattened vehicles, No. 1 and No. 2 steel scrap bales, 10–12 mm (0.40″–0.47″) structural demolition iron, appliance scrap, steel drums, aluminum castings, and motor/Zorba scrap without changing grate screens between batches. Pre-sectioning oversized plate with our hydraulic gantry shear boosts output by 20%–30%, and running an upstream dual-shaft pre-shredder increases line capacity by 25%–35%.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

3,000 HP (2,250 kW) Mill-Duty Heavy-Duty Metal Crushers for Direct EAF Melt-Shop Charging

When an electric arc furnace (EAF) steel mill or port scrap terminal processes 350 to 560 tons per day (100,000–160,000 tons/year), equipment selection shifts from yard-level machinery to heavy metallurgical plant engineering. In our Malaysian reference installation supplying direct EAF furnace charge, the PSX-3000 (2,250 kW / 3,000 HP class) from Huaxin Co., Ltd. operates as the primary crushing engine.

Built around a 2,600 mm (102″ / 8.5 ft) wide rotor and a 10 kV / 11 kV high-voltage slip-ring motor (or dual-drive configuration), the PSX-3000 swings 180–220 kg (397–485 lb) ZGMn18Cr2Mo alloy hammers that digest whole unflattened vehicles, compressed car logs, baled light iron, and 10–12 mm (0.40″–0.47″) structural demolition steel—shortening EAF tap-to-tap melt times by 4 to 6 minutes per heat through consistent 1.30–1.50 t/m³ (81–94 lb/ft³) charge density.

Full-Spectrum Mill & Terminal Feedstock Range: Built as a 2,250 kW (3,000 HP) scrap metal crushing machine, the PSX-3000 processes whole unflattened vehicles, No. 1 and No. 2 steel scrap bales, 10–12 mm (0.40″–0.47″) structural demolition iron, appliance scrap, steel drums, aluminum castings, and motor/Zorba scrap without changing grate screens between batches. Pre-sectioning oversized plate with our Q91-1600 Hydraulic Gantry Shear boosts output by 20%–30%, and running an upstream HX-DS2600 Dual-Shaft Pre-Shredder increases line capacity by 25%–35%.

Why EAF Melt Shops Replace Uncut HMS with PSX-3000 Shredded Charge

EAF Furnace Performance Metric Uncut Mixed HMS / Baled Scrap PSX-3000 Crushed Steel (ISRI 211)
Charging Bucket Bulk Density 0.55–0.75 t/m³ (requires 3–4 bucket drops per heat) 1.30–1.50 t/m³ (reduces charging to 2 bucket drops)
Graphite Electrode Breakage Risk High (cave-ins of heavy uncrushed beams snap electrodes) Minimal (free-flowing 50–100 mm / 2″–4″ spheres melt evenly)
Slag Volume & Liquid Steel Yield 84–87% liquid steel yield (high dirt, rust & coating slag) 92–94.5% liquid steel yield (~35–45 kWh/t lower EAF power)

PSX-3000 (3,000 HP / 2,250 kW / 40–70 TPH) Plant Specifications

Parameter PSX-3000 Factory Standard
Model & Rated Capacity PSX-3000 (3,000 HP Class) | 40.0–70.0 TPH (320–560 tons per 8-hour shift)
Infeed Throat & Pre-Press 2,600 mm (102″) clear width × 1,050 mm (41.3″) heavy dual-roller hydraulic compression
Main High-Voltage Motor 2,250 kW (3,000 HP) | 6 kV / 10 kV / 11 kV / 13.8 kV (50/60 Hz) + VCB & Liquid Resistance Starter
Auxiliary Plant Connected Load ~280–350 kW (tracked apron conveyor, hydraulic station, vibrating feeder, dual magnets, Z-box, baghouse & Zorba plant)
Rotor & Hammer Architecture Ø2,000 mm (Ø78.7″) fully capped disc rotor | 28–32 pcs ZGMn18Cr2Mo hammers (180–220 kg / 397–485 lb each)
Grates, Liners & Main Shaft 60–130 mm (2.4″–5.1″) upper/lower grates | 100 mm (3.9″) Mn13Cr2Mo liners | 400 mm (15.7″) forged 42CrMo shaft
Customs HS Code & Delivery HS Code: 8479.8190 | 60–75 Day Delivery | 50–80% Capital Savings vs. EU/US 3,000 HP Crushers

Heavy Mill Engineering: Crawler-Grade Apron Feeder & Automated Rotor Care

  • D9 Crawler-Track Grade Steel Apron Conveyor (14 m × 2.6 m / 46 ft × 8.5 ft): Built with forged alloy track chains, induction-hardened rollers, and overlapping 25 mm (1.0″) manganese pans to withstand 2-ton scrap bundles dropped directly from portal cranes.
  • Automated Pin-Pulling & Hydraulic Top Housing: At 180–220 kg (397–485 lb) per hammer, manual sledgehammer maintenance is impossible. The PSX-3000 includes a high-thrust hydraulic pin extractor rig and twin 100-ton hood-tilting cylinders so rotor servicing is completely mechanized.
  • SCADA / Siemens S7-1500 Control Room Package: Full plant telemetry tracking main motor winding & bearing RTD temperatures (PT100), hydraulic oil cleanliness/temperature, LRS electrolyte temperature, and automatic load-governed feeder modulation.

Compare Adjacent Steelworks Shredder Plants

FAQ: PSX-3000 (40–70 TPH / 3,000 HP) Shredder Plant

1. Why is the model named PSX-3000 while the motor is rated at 2,250 kW?

In international heavy crusher nomenclature, models above 2,000 HP are classified by their mechanical Horsepower (HP) class: 2,250 kW equals 3,017 HP (3,000 HP class). Similarly, our PSX-4000 is the 4,000 HP class (3,000 kW) and the PSX-6000 is the 6,000 HP class (4,500 kW).

2. Can Huaxin Co., Ltd. customize the voltage to match 11 kV, 13.8 kV, or 60 Hz North/South American grids?

Yes. Every PSX-3000 high-voltage drive package is custom-wound for your local utility grid—including 6 kV, 6.6 kV, 10 kV, 11 kV (50 Hz) or 4.16 kV, 12.47 kV, 13.8 kV (60 Hz)—complete with matched vacuum circuit breakers, liquid resistance starter (or MV-VFD), and power-factor correction capacitors.

Request PSX-3000 Steelworks Plant Engineering & Pricing: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Form) for reference project dossiers and a turnkey quote.

Additional information

Machine Type

Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series)

Model

PSX-3000 (PSX3000)

Hourly Capacity

40-70 TPH (320-560 tons/day (8-hour shift))

Inlet Width

2,600 mm

Main Motor Power

2,250 kW / ~3,000 HP (High-Voltage 6kV / 10kV / 11kV)

Voltage System

6kV / 6.6kV / 10kV / 11kV / 13.8kV High-Voltage (50/60 Hz)

Output Fragment Size

70-120 mm standard (50-120 mm customizable)

Crushed Steel Density

1.35-1.60 t/m³

Hammer Material

Mn18Cr2 High-Manganese Cast Steel (165-200 kg per hammerhead (Mn18Cr2))

Maintenance System

Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt

Standard Line Equipment

VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control

Optional Systems

Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter

Warranty & Delivery

1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote