
1000 Ton Scrap Metal Shear Baler (Y83Q-1000) for Sale | HUAXIN
The Y83Q-1000 is the 1,000-ton workhorse dual-mode shear baler from Huaxin Co., Ltd. (HUAXIN): a 400-ton lateral side press and 310-ton lid knead whole car bodies and ELV scrap into dense 780 × 600 mm (30.7 × 23.6″) bales at up to 1,400 kg/m³ (Baling Mode) or shear them into adjustable furnace lengths (Shearing Mode). Powered by 4 × 90 kW or 4 × 110 kW motors.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The Y83Q-1000 1,000-ton scrap metal shear baler is the mid-to-heavy workhorse of the HUAXIN dual-mode baler-logger-shear series. Built for auto dismantlers, regional MRFs, and scrap yards processing whole depolluted car bodies alongside mixed HMS and light structural steel, it gives one crew two distinct revenue outputs: in Baling Mode, it kneads and compacts loose sheet, appliances, or flattened car shells into high-density 780 × 600 mm (30.7 × 23.6″) bales reaching up to 1,400 kg/m³ (87.4 lb/ft³) and ejects them whole; in Shearing Mode, it feeds the compacted log incrementally through the 1,000-ton guillotine throat to produce furnace-ready sheared steel. Compare it with our smaller Y83Q-500 (500-ton shear baler) for light feeder yards, step up to the Y83Q-1300 (1,300-ton shear baler) for wider 1,000 mm throat capacity, or explore our full scrap metal shear lineup.
Whole Car Bodies and Mixed Scrap: Knead Into Bales or Shear to Length
A whole depolluted passenger car body at loose bulk density (~200 kg/m³) wastes container and truck space. On the Y83Q-1000, the operator loads the shell into the 7,830 × 2,750 mm (25.7 × 9.0 ft) loading bucket and tips it into the 8,000 × 2,000 mm (26.2 × 6.6 ft) pre-compression chamber without manual torch pre-cutting. Two 155-ton lid cylinders (310 tons total) close from above while two 200-ton lateral press cylinders (400 tons total) squeeze across the 8,000 × 600 mm side face, folding roof pillars, doors, and floor pans inward into a tight 780 × 600 mm cross-section.
From there, the operator selects the discharge method on the PLC panel: either lift the shear gate so the 120-ton pusher ejects a finished rectangular bale/log for stacking and transport, or hold the charge under the 200-ton vertical stamper while the 1,000-ton (9,807 kN) blade shears the compacted log into custom furnace or shredder lengths.
How the Y83Q-1000 Differs from a Heavy PS 1000T Side-Compression Shear
Buyers often ask whether their yard needs the Y83Q-1000 shear baler or the PS 1000T side-compression shear. The distinction lies in bale output vs. pure structural compression force:
- Choose the Y83Q-1000 Shear Baler when your buyers want both finished bales and sheared steel, and your intake is dominated by car bodies, ELV shells, white goods, stamping offcuts, and light-to-medium structural profiles that knead into a 780 × 600 mm bale section.
- Choose the PS 1000T Side-Compression Shear when you never sell uncut bales and need heavier multi-stage box compression and a wider 1,000–1,200 mm blade dedicated 100% to shearing heavy mixed structural steel.
HUAXIN Y83Q-1000 Technical Specifications
The table below lists the factory engineering specifications for the HUAXIN Y83Q-1000. Hourly throughput in Baling Mode and Shearing Mode is confirmed by our engineering desk based on your specific scrap mix and target cut length before quotation.
| Parameter | Y83Q-1000 Specification (Metric / Imperial) |
|---|---|
| Shearing Force | 1,000 ton (9,807 kN / 1,102 short ton) |
| Operating Modes | Dual Mode: Finished Bale Ejection Mode & Adjustable-Length Shearing Mode |
| Cutting Width (Throat) | 800 mm (31.5″) |
| Sheared Cutting Length | Freely adjustable via PLC control |
| Hold-Down Stamper Force | 200 ton (1,961 kN / 220 short ton) |
| Pre-Compression Box (L × W) | 8,000 × 2,000 mm (26.2 × 6.6 ft) |
| Lateral Side Press Force & Face | 400 ton (3,923 kN / 441 short ton, 2 × 200T) · 8,000 × 600 mm (26.2 ft × 23.6″) |
| Lid Closing Force | 310 ton (3,040 kN / 342 short ton, 2 × 155T) |
| Rear Pusher Force | 120 ton (1,177 kN / 132 short ton) |
| Side Loading Bucket (L × W) | 7,830 × 2,750 mm (25.7 × 9.0 ft) |
| Compacted Bale / Log Section (W × H) | 780 × 600 mm (30.7 × 23.6″) |
| Maximum Bale Density | Up to 1,400 kg/m³ (87.4 lb/ft³) |
| Hydraulic Drive Power | 4 motor-pump groups: 4 × 90 kW or 4 × 110 kW (360 kW or 440 kW / 483 or 590 HP) |
| Cold-Weather Protection | Integrated hydraulic heating system for low-temperature regions |
Four Independent Motor-Pump Groups and Cold-Climate Hydraulic Heating
Continuous car-body baling and 1,000-ton shearing demand high oil flow during box closing and high pressure during the final squeeze and cut. The Y83Q-1000 distributes this load across four independent motor-pump groups—configurable at either 4 × 90 kW (360 kW / 483 HP) or 4 × 110 kW (440 kW / 590 HP) to match your substation capacity. The hydraulic station also includes an integrated oil heating system for low-temperature yards, preventing cold-start cavitation in winter climates. Operators manage all loading bucket, baling, and shearing sequences from the main cabinet or the handheld remote control.
Buyer Questions — Y83Q-1000 Dual-Mode Shear Baler
Can the Y83Q-1000 preload the next batch while the current car body is being baled or sheared?
Yes. Because the machine is equipped with a 7,830 × 2,750 mm (25.7 × 9.0 ft) side loading bucket, the grapple crane can stage the next car body or load of loose sheet in the bucket while the closed chamber completes its current baling or shearing cycle, dumping the new charge in as soon as the lid opens.
What materials should not be fed into the Y83Q-1000?
Keep heavy solid steel plate exceeding the 1,000-ton blade rating, railway axles, cast iron engine blocks, unpierced pressurized cylinders, and hazardous waste out of the chamber. For wider heavy demolition scrap and 1,000 mm throat capacity, step up to the Y83Q-1300.
To get a formal factory quotation and layout drawing for the Y83Q-1000, contact our engineering desk with your main feedstock, daily tonnage, and local grid voltage, or return to the Scrap Metal Shear Baler category to compare all models.








