
500 Ton Scrap Metal Shear Baler (Y83Q-500) for Sale | HUAXIN
The Y83Q-500 is the 500-ton (5,000 kN) dual-mode scrap metal shear baler from Huaxin Co., Ltd. (HUAXIN): it kneads and compresses loose light sheet and white goods into high-density bales for direct ejection (Baling Mode), or pre-compresses and shears long mixed scrap into furnace lengths (Shearing Mode). Equipped with an 800 mm (31.5″) blade, 6,000 mm (19.7 ft) box, 2 × 45 kW (90 kW) drive, and handheld remote control.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
The Y83Q-500 500-ton scrap metal shear baler is the entry model in the HUAXIN dual-mode baler-logger-shear lineup. Engineered for feeder yards, appliance dismantlers, and mixed-scrap processors, it solves a classic small-yard dilemma: buying both a standalone metal baler and a guillotine shear requires two foundations, two power drops, and two operators. The Y83Q-500 combines both jobs on one frame—operating in Baling Mode to knead and compress light sheet metal, stamping skeletons, and white goods into dense rectangular bales ejected straight out the front, or switching to Shearing Mode to compress and cut longer mixed steel into furnace-sized lengths. If your yard processes whole passenger car bodies or heavier structural profiles every day, step up to our Y83Q-1000 (1,000-ton shear baler) or Y83Q-1300 (1,300-ton shear baler), or browse all 6 architectures in our scrap metal shear hub.
Dual Operating Modes: Direct Bale Ejection vs. Compressed Length Shearing
Unlike a dedicated PS Series side-compression shear—which uses ultra-heavy lateral rams, top hold-down cylinders, and a rear pusher strictly to feed a guillotine blade and never ejects uncut bales—the Y83Q-500 is built around a dual-purpose baling and shearing chamber:
- Baling Mode (For Light Sheet, Tinplate & White Goods): The guillotine gate lowers to seal the front of the throat as a solid bulkhead. Six hydraulic lid cylinders (630 kN / 64 ton) and dual top pressing cylinders (1,000 kN / 102 ton) fold and knead springy appliances, light sheet, and aluminum offcuts downward while the 800 kN (82 ton) rear pusher packs the charge against the closed gate into a tight bale. The front gate then lifts so the pusher ejects the finished bale intact.
- Shearing Mode (For Longer Profiles, Pipe & Mixed HMS): Once the chamber kneads the bulky charge into a compacted log tapered to a 700 mm (27.6″) throat width, the rear pusher advances the log in set increments under the 500-ton (5,000 kN) guillotine blade, shearing clean furnace-ready pieces with every stroke.
Four Coordinated Cylinder Groups Powered by a 90 kW Twin-Motor Station
The Y83Q-500 runs on four synchronized hydraulic cylinder assemblies operating at 25 MPa (3,626 psi) system pressure: the main shearing cylinder (SM500/360-970 × 1), dual vertical pressing cylinders (SM160/105-1020 × 2), six lid-closing cylinders along the 6,000 mm box (SM180/120-595 × 6), and the long-stroke pusher cylinder (SM200/140-6200 × 1). Two 45 kW YE2 motors (90 kW / 121 HP total) drive twin HY250 oil pumps through an LMJ-500 cartridge valve block, with a plate heat exchanger keeping the 5,000-liter (1,321 gal) hydraulic reservoir within safe operating temperature during continuous shifts.
HUAXIN Y83Q-500 Factory Specification Sheet
The parameters below reflect the verified HUAXIN factory engineering sheet for the Y83Q-500 shear baler. Because hourly tonnage varies significantly between Baling Mode (light sheet/appliances) and Shearing Mode (mixed structural scrap), our engineering team confirms expected TPH for your specific scrap mix and mode ratio prior to quotation.
| Parameter | Y83Q-500 Specification (Metric / Imperial) |
|---|---|
| Shearing Force | 500 ton (5,000 kN / 551 short ton) |
| Operating Modes | Dual Mode: High-Density Bale Ejection Mode & Automatic Shearing Mode |
| Main Shearing Cylinder | SM500/360-970 × 1 |
| Top Pressing Cylinders | SM160/105-1020 × 2 — 1,000 kN total (102 metric ton / 112 short ton) |
| Rear Pusher Cylinder | SM200/140-6200 × 1 — 800 kN (82 metric ton / 90 short ton) |
| Box Lid Cylinders | SM180/120-595 × 6 — 630 kN total (64 metric ton / 71 short ton) |
| Blade Length & Cutting Angle | 800 mm (31.5″) blade width · 12° shearing angle |
| Blade Opening Height | 750–920 mm (29.5–36.2″) |
| Charge Box Dimensions (L × W × H) | 6,000 × 2,377 × 1,500 mm (19.7 × 7.8 × 4.9 ft), tapering to 700 mm (27.6″) throat |
| Hydraulic System Pressure & Tank | 25 MPa (3,626 psi) · 5,000 L (1,321 US gal) oil tank |
| Main Motors & Pumps | 2 × YE2 45 kW (90 kW / 121 HP total) · HY250 + HY250 × 2 pumps |
| Valve Block & Cooling | Cartridge valve LMJ-500 × 1 · Plate heat exchanger |
| Structure & Wear Protection | Q235 structural steel frame lined with replaceable NM500 wear plates |
| Operation, Discharge & Power | Electric cabinet + handheld remote control · Front discharge · 3-Phase 380V/50Hz (customizable) |
Ideal Scrap Streams for the Y83Q-500 vs. When to Step Up
The Y83Q-500 is built around light-to-medium bulky scrap that benefits from top-and-lid kneading before baling or shearing: depolluted white goods (washing machines, refrigerators, stoves), light sheet metal, roofing tin, ELV light panels, aluminum extrusions, thin pipe, and light structural offcuts up to 6 meters long. Do not feed thick solid plate, heavy mill beams, railway axles, or sealed pressure vessels into the Y83Q-500. While its kneading box handles cut car shells and light panels easily, yards that want to fold intact passenger car bodies every shift should choose the Y83Q-1000 with its 400-ton lateral side press.
Common Questions — Y83Q-500 Shear Baler
How is the Y83Q-500 shear baler different from the PS 500T side-compression shear?
The Y83Q-500 is a dual-mode combination machine that can either eject finished rectangular bales of light scrap (Baling Mode) or knead and shear longer material into furnace lengths (Shearing Mode) using its 6-cylinder hinged lid and top press. The PS 500T side-compression shear is a dedicated shearing machine that uses heavy lateral side rams, top compression, and a rear pusher strictly to feed the guillotine blade for higher-force structural shearing.
Can the Y83Q-500 be operated by one person from the loader or crane?
Yes. Every Y83Q-500 ships with both a main electrical control cabinet and a handheld remote control, allowing the grapple or loader operator to close the lid, trigger the baling or shearing cycle, and discharge finished bales or cut lengths out the front without leaving the loading zone.
To request a factory quote for the Y83Q-500, send our engineering team your primary scrap materials, longest piece dimension, and whether you prioritize baling, shearing, or a 50/50 split. You can also compare all three models in our Scrap Metal Shear Baler category.




