
800 Ton Container Shear (HC800) for Sale | HUAXIN
The HC800 from HUAXIN is where the horizontal container range turns heavy: 800 metric tons (7,845 kN) of shearing force, a 1,600 mm (63.0″) feeding tank and blade, and three 55 kW motors (165 kW / 221 HP total). Takes the HC630’s mixed diet and adds thicker demolition steel, storage tank sections, and heavier structural offcuts in a single stroke.
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
When Incoming Scrap Gets Thicker, Not Wider: 800T & 165 kW
The HC800 container shear retains the exact same 1,600 mm (63.0″) feeding tank and blade width as our HC630. What changes is everything behind the blade: shearing force jumps by 170 metric tons to 800 tons (7,845 kN), and a third 55 kW hydraulic unit brings total drive power to 165 kW (221 HP). The HC800 is the targeted upgrade when your scrap pieces already fit inside a 1.6-meter box, but thicker structural offcuts, heavy vessel walls, and dense HMS bundles force a 630-ton blade to double-bite or slow down.
Technical Specifications — HUAXIN HC800 Container Shear
| Specification Item | HC800 Parameter (Metric / Imperial) |
|---|---|
| Nominal Shearing Force | 800 Metric Tons (7,845 kN / ~882 US Short Tons) |
| Feeding Tank Width | 1,600 mm (63.0″ / 1.6 m) — tank length built to order |
| Guillotine Blade Width | 1,600 mm (63.0″ / 1.6 m) |
| Blade Throat Height | 400 mm (15.7″) |
| Installed Motor Power | 55 kW × 3 units (165 kW / 221 HP total; available in equal or larger power) |
| Four-Edge Blade Steel | M6V, H13, X45, D2 alloy tool steels |
| Control & Drive System | PLC automatic control, hydraulic pre-compression + guillotine head |
Heavy Demolition and Mixed Scrap on the HC800
With 800 tons concentrated across a 1,600 mm (63.0″) blade, the HC800 shears cleanly through tough mixed scrap:
- Heavy Demolition & Tank Dismantling: Industrial storage tank walls, pressure vessel shells (depressurized), thicker structural steel offcuts, heavy-wall pipe, and HMS 1 & 2.
- Containers, Vehicles & Appliances: Whole shipping container sections, passenger cars and light trucks, agricultural machinery frames, and stamped steel skeletons.
- Upstream Pre-Sizing for Shredders & Crushers: Using the HC800 to pre-crop heavy demolition steel before feeding an HX-DS1800 Shredder or PSX-900 Crusher keeps the downstream shredder or crusher fed with pre-sized pieces. If you need a wider 2,000 mm (78.7″) tank and 500 mm throat height for full-width container panels, step up to the HC1000.
Frequently Asked Questions — HC800
Why does the HC800 use three 55 kW motors instead of two larger motors?
Our container range from the HC630 to the HC1250 is engineered around a modular 55 kW motor-pump block—adding one 55 kW unit per tonnage step (2, 3, 4, and 5 units). This keeps spare motors, pumps, and electrical contactors 100% standardized across the lineup and allows staged star-delta starting with minimal grid inrush.
Can the HC800 replace an 800-ton gantry shear?
For light-to-heavy mixed scrap, container shells, and demolition offcuts that fit a 1,600 mm box, yes—at a fraction of the civil foundation cost. For 8-to-10 meter heavy bridge girders and thick ship plate, choose our Q91 Gantry Shears.
What is the largest piece the HC800 takes?
Anything that fits the 1,600 mm (63.0″) wide feeding tank and the 400 mm (15.7″) throat height. Pieces wider than 1,600 mm belong on the HC1000 (2,000 mm tank); thick solid plate and heavy bridge girders belong on our Q91 Gantry Shears.
To price the HC800, send us your thickest section and your daily tonnage — we will confirm whether the 630-ton or 800-ton blade is the right call before quoting. The full container shear range is here if you are still comparing.




