500 Ton Container Shear (HC500) for Sale | HUAXIN

The HC500 from HUAXIN is the mid-range workhorse of the container shear series: 500 metric tons (4,903 kN) of shearing force, a 1,400 mm (55.1″) feeding tank and blade, and two 45 kW motors (90 kW / 120 HP total). Takes the wide light diet of the HC400 and adds demolition steel, light structural sections, and mixed domestic scrap at a faster hydraulic cycle.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

The Mid-Range Workhorse on a 1,400 mm Tank

Every machinery series has a sweet-spot model that small-to-medium yards settle on when entry-level tonnage feels tight, and in our horizontal box range it is the HC500 container shear. Sharing the generous 1,400 mm (55.1″) feeding tank and blade width of the HC400, the HUAXIN HC500 adds 25% more shearing force (500 metric tons / 4,903 kN) and steps up to two 45 kW motors (90 kW / 120 HP total). That extra hydraulic power and cylinder force keep the guillotine cycling briskly when light sheet scrap is mixed with structural demolition steel, angle iron, and thicker pipe offcuts.

Technical Specifications — HUAXIN HC500 Container Shear

Specification Item HC500 Parameter (Metric / Imperial)
Nominal Shearing Force 500 Metric Tons (4,903 kN / ~551 US Short Tons)
Feeding Tank Width 1,400 mm (55.1″ / 1.4 m) — tank length built to order
Guillotine Blade Width 1,400 mm (55.1″ / 1.4 m)
Blade Throat Height 400 mm (15.7″)
Installed Motor Power 45 kW × 2 units (90 kW / 120 HP total; available in equal or larger power)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels
Control & Drive System PLC automatic control, hydraulic pre-compression + guillotine head

What the HC500 Handles

Built for growing feeder yards and regional demolition recyclers, the HC500 processes a broad daily diet:

  • Light-to-Medium Demolition & Structural Scrap: Window frames, light roof trusses, structural channels and angles, rebar bundles, steel pipes, and factory fabrication offcuts.
  • Sheet, Appliances & Automotive Trim: Wide sheet metal, white goods, stamped automotive panels, light agricultural equipment, and mixed domestic scrap.
  • Line Pairing & Output Synergy: Pre-shearing oversized demolition steel on the HC500 before feeding a PSX-315 Hammer Mill Crusher or Y81K-315 Scrap Baler prevents chamber bridging and keeps the downstream crusher or baler fed with pre-sized pieces. If whole car bodies, shipping containers, and medium HMS are your daily mainstay rather than occasional loads, step up to the 1,600 mm wide HC630.

Frequently Asked Questions — HC500

What is the practical difference between the HC500 and the HC630?
The HC630 widens the feeding tank and blade from 1,400 mm to 1,600 mm (63″), adds 130 tons of shearing force, and increases motor power from 90 kW to 110 kW. Choose the HC500 for light structural and demolition steel up to 1.4 m wide; choose the HC630 when whole car bodies and light shipping containers are on the daily schedule.

Does the HC500 need a deep foundation pit?
No. Unlike large gantry shears that require deep pits, the horizontal container shear sits on a flat, reinforced concrete slab. Civil foundation drawings are provided with every order.

Every HC model is built to order with the tank width and motor package matched to your scrap. Explore the container shear range — the HC400 sits below this model and the HC630 above it — or send an RFQ with your material mix.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote