50-100 TPH Metal Recycling Crusher & Hammer Mill | 3000kW Scrap Crusher (PSX-4000)

Designed for metropolitan auto-crushing hubs, deep-water export docks, and 100-ton+ EAF melt shops requiring up to 100 metric tons per hour (400–800 tons/day), the PSX-4000 50-100 TPH scrap metal crusher from Huaxin Co., Ltd. delivers 4,000 Horsepower (3,000 kW) of high-voltage impact energy inside a 2,600 mm (102″) wide super-heavy chamber. Swinging 220–260 kg (485–573 lb) ZGMn18Cr2Mo hammers on a Ø2,150 mm (Ø84.6″) capped rotor, it crushes whole vehicles, dense bales, and 12–15 mm (0.47″–0.59″) structural steel into 1.35–1.55 t/m³ premium furnace charge. Terminal-Scale Multi-Material Capability: Across 50 to 100 TPH shifts, the 3,000 kW (4,000 HP) PSX-4000 metal recycling crusher handles whole cars, SUVs, and truck cabs, dense HMS bales, 12–15 mm (0.47″–0.59″) structural steel scrap, white goods, aluminum engine scrap, and copper-bearing motor armatures on a single grate aperture (such as 80–120 mm / 3.1″–4.7″). Integrating a Huaxin hydraulic shear for oversized girders lifts hourly tonnage by 20%–30%, while an upstream heavy dual-shaft shredder boosts throughput by 25%–40%.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

4,000 Horsepower (3,000 kW) Mega-Shredding for 250,000-Ton/Year Terminals

When a scrap terminal loads 30,000-ton bulk cargo vessels or feeds a 120-ton electric arc furnace directly via conveyor, a 25 TPH crusher cannot keep up with vessel demurrage or furnace tap schedules. The PSX-4000 (4,000 HP class / 3,000 kW) from Huaxin Co., Ltd. is built for continuous 50 to 100 TPH (400–800 TPD per shift) industrial production—delivering the same hourly output as European and North American 4,000 HP heavy-duty metal crushers at 50% to 70% lower capital expenditure.

Inside the 2,600 mm (102″) wide housing, a Ø2,150 mm (Ø84.6″) fully capped disc-and-barrel rotor spins 220–260 kg (485–573 lb) ZGMn18Cr2Mo hammers. That massive rotating flywheel crushes whole unflattened SUVs, light trucks, dense No. 1 and No. 2 bundles, and 12–15 mm (0.47″–0.59″) structural steel in seconds without speed sag.

Terminal-Scale Multi-Material Capability: Across 50 to 100 TPH shifts, the 3,000 kW (4,000 HP) PSX-4000 metal recycling crusher handles whole cars, SUVs, and truck cabs, dense HMS bales, 12–15 mm (0.47″–0.59″) structural steel scrap, white goods, aluminum engine scrap, and copper-bearing motor armatures on a single grate aperture (such as 80–120 mm / 3.1″–4.7″). Integrating a Huaxin Q91-2000 Hydraulic Shear for oversized girders lifts hourly tonnage by 20%–30%, while an upstream HX-DS2600 Heavy Dual-Shaft Shredder boosts throughput by 25%–40%.

Single 3,000 kW Motor vs. Dual 2 × 1,500 kW Twin-Drive Architecture

Depending on your regional utility substation short-circuit capacity (MVA), Huaxin Co., Ltd. supplies the PSX-4000 main drivetrain in two proven high-voltage configurations:

Drivetrain Feature Option A: Single 3,000 kW (4,000 HP) HV Motor Option B: Dual 2 × 1,500 kW Sequential Twin-Drive
Substation Grid Impact Requires ≥5,000 kVA dedicated 10kV/11kV/13.8kV substation Halves starting inrush current (Motor #1 starts first, Motor #2 follows 15s later)
Shaft Torque Distribution Single-ended drive via heavy universal cardan shaft / fluid coupling Balanced bilateral torque driving both ends of the 440 mm (17.3″) 42CrMo rotor shaft
Emergency Redundancy Standard single-motor dependency Can run light sheet/ELV shifts at 50% capacity on one 1,500 kW motor if needed

PSX-4000 (4,000 HP / 3,000 kW / 50–100 TPH) Technical Specifications

Parameter PSX-4000 Heavy Scrap Crushing Machines Specification
Model & Rated Capacity PSX-4000 (4,000 HP Class) | 50.0–100.0 TPH (400–800 tons per 8-hour shift)
Chamber Width & Feeder Lift 2,600 mm (102″) clear width × 1,150 mm (45.3″) 80-ton twin-roller hydraulic compression
Main High-Voltage Drive 3,000 kW (4,000 HP) (Single 3,000 kW or Dual 2 × 1,500 kW) | 6kV / 10kV / 11kV / 13.8kV
Auxiliary Downstream Power ~380–460 kW (tracked apron conveyor, hydraulics, vibrating pan, dual magnets, Z-box, baghouse & multi-stage Zorba plant)
Rotor & Hammer Assembly Ø2,150 mm (Ø84.6″) capped rotor | 30–34 pcs ZGMn18Cr2Mo hammers (220–260 kg / 485–573 lb each)
Grate Openings & Output Density 70–140 mm (2.8″–5.5″) upper/lower grates | Output density: 1.35–1.55 t/m³ (84–97 lb/ft³)
Main Shaft & Armor Thickness 440 mm (17.3″) forged 42CrMo shaft | 100–120 mm (3.9″–4.7″) cast Mn13Cr2Mo chamber liners
Customs HS Code & Warranty HS Code: 8479.8190 | 1-Year Full Warranty + 3–5 Year Main Frame Structural Warranty

Multi-Stage Non-Ferrous Zorba, Zurik & Copper Meatball Recovery

At 75 tons per hour average throughput, a PSX-4000 line liberates 3 to 6 tons per hour of non-ferrous metals (worth $6,000–$12,000+ per hour). To capture every kilogram of value, Huaxin Co., Ltd. engineers a multi-stage downstream separation island:

  • Dual-Drum Permanent Magnetic Cascade (2,000 mm / 79″ Wide Drums): Primary lift drum + secondary scavenging drum with an air-knife splitter in between, knocking loose trapped copper armatures (“copper meatballs”) and aluminum trim before the steel reaches the radial stacker.
  • Trommel / Vibrating Sizing Screen + Twin Eddy-Current Separators: Splitting the non-magnetic stream into fine (10–40 mm / 0.4″–1.6″) and coarse (40–110 mm / 1.6″–4.3″) fractions before passing over two separate eccentric eddy-current rotors increases Zorba recovery from ~89% up to 96.5%+.
  • Inductive Sensor / X-Ray Sorting Ready: Conveyor geometry is pre-engineered to accept optical or X-ray sensors for recovering stainless steel (Zurik) and insulated copper wire from the final tailing stream.

Compare High-Tonnage Heavy-Duty Metal Crushers Plants

FAQ: PSX-4000 (50–100 TPH / 4,000 HP) Metal Recycling Crushers

1. How do you control noise, ground vibration, and dust on a 4,000 HP crusher near urban ports?

First, the 95-ton PSX-4000 mill frame sits on heavy helical steel spring + elastomeric viscous dampers that isolate >92% of dynamic impact forces from the concrete foundation. Second, our dual-stage cyclone + pulse-jet baghouse system (80,000–120,000 m³/h airflow) maintains negative pressure inside the mill hood and vibrating transfer chutes, keeping stack dust emissions below 15–20 mg/Nm³. Acoustic enclosure panels around the mill house are also available.

2. What is the factory testing and delivery procedure for a PSX-4000 plant?

Before disassembly and shipping (via flat-rack + 40HQ containers), the complete rotor, bearing housings, hydraulic pre-press arch, pin puller, and PLC control cabinets undergo full mechanical run-in and ultrasonic/magnetic-particle weld inspection at Huaxin Co., Ltd.‘s Zunhua and Tangshan factories (client or third-party SGS/BV witness inspection welcomed).

Request a PSX-4000 Mega Plant Feasibility & Quote Package: Contact Sales Manager Leon Li at Huaxin Co., Ltd. ([email protected] | WhatsApp +86 159 0036 3543 | Contact Form) for custom engineering layouts.

Additional information

Machine Type

Scrap Metal Crusher / Hammer Mill Shredder Line (PSX Series)

Model

PSX-4000 (PSX4000)

Hourly Capacity

50-100 TPH (400-800 tons/day (8-hour shift))

Inlet Width

2,600 mm

Main Motor Power

3,000 kW / ~4,000 HP (High-Voltage 6kV / 10kV / 11kV)

Voltage System

6kV / 10kV / 11kV / 13.8kV High-Voltage (3-Phase 50/60 Hz)

Output Fragment Size

70-120 mm standard (50-120 mm customizable)

Crushed Steel Density

1.40-1.65 t/m³

Hammer Material

Mn18Cr2 High-Manganese Cast Steel (190-230 kg per hammerhead (Mn18Cr2))

Maintenance System

Hydraulic Hammer Pin Extractor + Hydraulic Casing Tilt

Standard Line Equipment

VFD Chain-Plate Conveyor, Hydraulic Pre-Press Roller, Hammer Mill, Vibrating Feeder, Permanent Magnet Drum, Discharge Belts, PLC Control

Optional Systems

Cyclone + Pulse-Jet Baghouse Dust Collector, Cooling Spray, Air Classifier, Eddy-Current Non-Ferrous Sorter

Warranty & Delivery

1-Year Warranty, Within 45 Days After Payment, CE & ISO 9001

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote