630 Ton Container Shear (HC630) for Sale | HUAXIN

The HC630 from HUAXIN is the standard container shear for a general recycling yard: 630 metric tons (6,178 kN) of shearing force, a 1,600 mm (63.0″) feeding tank and blade, and two 55 kW motors (110 kW / 148 HP total). Takes whole light containers, HMS 1 & 2, depolluted car bodies, and mixed demolition steel. PLC automatic control, feeding tank built to order.

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

The Standard Tonnage When a Yard Buys One Container Shear

Ask a general scrap yard manager what their shear processes and the answer is rarely a single commodity—it is whatever the collection trucks tip on the pad. Sheet iron and light angles in the morning, a light container shell after lunch, mixed HMS and a depolluted car body before close. The HC630 container shear from HUAXIN is sized specifically for that mixed day: 630 metric tons (6,178 kN) of force, a widened 1,600 mm (63.0″) feeding tank and guillotine blade, and 110 kW (148 HP) of twin-motor hydraulic power. Stepping up from the HC500, it is the first model in the container range where car bodies and light container shells are a routine job rather than a tight squeeze—and it still runs on a 110 kW power package that fits most medium yards without a high-voltage substation upgrade.

Technical Specifications — HUAXIN HC630 Container Shear

Specification Item HC630 Parameter (Metric / Imperial)
Nominal Shearing Force 630 Metric Tons (6,178 kN / ~694 US Short Tons)
Feeding Tank Width 1,600 mm (63.0″ / 1.6 m) — tank length sized to your yard
Guillotine Blade Width 1,600 mm (63.0″ / 1.6 m)
Blade Throat Height 400 mm (15.7″)
Installed Motor Power 55 kW × 2 units (110 kW / 148 HP total; available in equal or larger power)
Four-Edge Blade Steel M6V, H13, X45, D2 alloy tool steels
Control & Drive System PLC automatic control, hydraulic hold-down pre-compression + guillotine head

Full Mixed-Yard Coverage on the HC630

With 1,600 mm (63.0″) of throat width and 630 tons of vertical shearing force, the HC630 bridges the gap between light sheet cutters and heavy mill shears:

  • Car Bodies, Containers & HMS: Depolluted passenger car bodies, light container shells, storage tank sections, HMS 1 & 2, and mixed C&D demolition steel.
  • Sheet, Appliances & Profiles: Wide stamping skeletons, white goods, steel pipes, rebar bundles, and structural offcuts.
  • Tandem Line Synergy: Feeding pre-sheared HC630 scrap into a downstream PSX-560 Scrap Metal Crusher or HX-DS1500 Dual-Shaft Shredder keeps the downstream crusher or shredder fed with pre-sized pieces. For thick plate (>40 mm), heavy bridge H-beams, and railway rails, compare our Q91-630 Heavy Gantry Shear.

Frequently Asked Questions — HC630

Can the HC630 shear a whole passenger car body?
Yes. A standard depolluted passenger car body fits directly inside the 1,600 mm (63.0″) wide feeding tank, where the hold-down pre-compression assembly flattens it before the 630-ton blade shears it to furnace length. For heavier SUV frames or thick tank walls on the same 1,600 mm tank width, step up to the HC800 (800T, 165 kW).

How is the HC630 different from a shear baler?
A shear baler is a dual-mode machine that both ejects rectangular bales and shears logs. The HC630 is a dedicated horizontal box shear focused strictly on fast, high-efficiency cold shearing into furnace lengths at a lower capital and maintenance cost.

One container shear for a yard that takes whatever the trucks tip on the pad — that is the HC630’s job. Compare it with the HC500 below or the HC800 above, or request a quotation with your material list and daily tonnage.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote