Description

Y81K-630 630 Ton Scrap Metal Baler

630 Ton Scrap Metal Baler for Sale – Y81K-630 Mill Mainstay

The Y81K-630 is specified around heavy HMS, steel turnings, heavy section, continuous feed, because chamber, force and motor only make sense together.

The Y81K-630 is a gantry-type heavy baler machine: material enters the chamber, is compressed to the set bale size, and leaves tied.

We quote the Y81K-630 against your material profile first and a price second, because the wrong chamber size cannot be fixed later with software.

Key highlights at a glance:

• Bale size: 600×600 / 700×700
• Bale weight: 1200–1300 kg
• Chamber: 3500×3000×1300 / 4000×3000×1300
• Installed power: 2×55 kW
• Compression force: 630×2 ton
• Duty rating: Three-shift duty
• Discharge: gantry-type heavy baler

Who the Y81K-630 Is Built For

Buyers at this tier run smelting plants, mill feedstock lines, large recyclers. Typical applications cover smelting plants, mill feedstock lines, large recyclers.

We build the Y81K-630 in multiple chamber sizes because two yards of the same size rarely feed a machine the same material mix.

Where the Y81K-630 Sits in the Baler Range

One tier up, the Y81K-800 adds chamber volume and installed power; one tier down, the Y81K-500 trims both.

Buyers upgrading from this class usually move to the Y81K-800, while buyers consolidating duty look at the Y81K-500. Either tier is quoted against the same specification discipline, which is what makes the comparison meaningful.

Key Specifications – Y81K-630

Model	Y81K-630
Main cylinder force	630×2 ton
Chamber size	3500×3000×1300 / 4000×3000×1300
Bale size	600×600 / 700×700
Bale weight	1200–1300 kg
Motor	2×55 kW
Duty rating	Three-shift duty

Chamber and Bale Configurations

The Y81K-630 is ordered in one of the chamber configurations below. Three chamber configurations.

Chamber size	Bale size	Bale weight
3500×3000×1300	700×700	700–1200
4000×3000×1300	600×600	700–1250
4000×3000×1300	700×700	700–1300

With the 3500×3000×1300 chamber the Y81K-630 delivers 700×700 bales weighing 700–1200 kg, sized for on-site processing.

The 4000×3000×1300 option is specified for container loading: 600×600 bales, 700–1250 kg each.

Choose 4000×3000×1300 if furnace-direct charging describes your operation; bale size 700×700, weight 700–1300 kg.

Applications and Materials

The Y81K-630 is specified for heavy HMS, steel turnings, heavy section, continuous feed, and the standard configuration covers smelting plants, mill feedstock lines, large recyclers. Mixed intake is handled by the Y81K-630, but bale density follows your material, not a machine datasheet average.

Inside the plant the Y81K-630 usually sits between intake and outbound freight: scrap is charged from the floor or a hopper, compressed to the ordered bale size, tied, and staged for the truck. On the Y81K-630 a 1300 kg bale occupies a fraction of the floor space of the same weight in loose form, which is what converts baling into freight savings.

Material	Suitability for the Y81K-630
Heavy hms	best results with continuous feeding
Steel turnings	routine duty for this class
Heavy section	processed at the quoted output
Continuous feed	primary feed for the Y81K-630

How the Y81K-630 Works

Charging, compressing, tying and discharging are the four steps of every cycle. On the Y81K-630 the charge is compressed by the main cylinder against the chamber end wall until the bale reaches its set size, then wired off and released through the gantry-type heavy baler arrangement. The finished bale is weighed, tagged and staged for the truck, and the Y81K-630 cycle repeats on the same four steps for the whole shift.

Power supply for the Y81K-630 is a 2×55 kW pack, built for 380 V, 400 V or 415 V at 50 Hz, or 60 Hz supply to order, with diesel drive available for off-grid sites.

Charging discipline and a fixed cycle are what keep Y81K-630 output inside the stated band.

Bale Economics: Why the 630 Ton Class Pays

The volume argument on the Y81K-630 is simple: the same tonnage, fewer loads, and a yard that can be walked across.

Stacked storage of Y81K-630 bales works because the bale is tied while still compressed, not released and re-pressed afterwards.

The Y81K-630 converts tonnage you already pay freight for into a smaller volume, which is where most of the return actually sits.

Installed Power and Site Supply

The Y81K-630 runs a 2×55 kW power pack totalling 110 kW, matched to 380 V, 400 V or 415 V at 50 Hz, or 60 Hz supply to order. The machine ships wired for your site supply, with the diesel-driven pack quoted as a separate option for remote yards.

Choosing the Right Configuration

Chamber width also sets your crane or grab loading pattern on the Y81K-630. Check the feed opening against your existing grab or charger before ordering; retrofitting a different charging arrangement after delivery is expensive on the Y81K-630.

When comparing the Y81K-630 against a larger tonnage, remember that chamber volume grows faster than press force. A higher tonnage rating does not automatically mean a heavier bale of your material on the Y81K-630. On the Y81K-630 the configuration table above states the figure for each chamber option.

Control, Power and Discharge Options

Discharge on the Y81K-630 follows gantry-type heavy baler; sites with side clearance suit turn-out, and sites feeding a conveyor suit push-out.

Feed Preparation and Material Handling

Sorting light fraction out before the Y81K-630 reduces bridging in the chamber. That fraction usually bales better on a lighter class or a densifier.

Maintenance, Wear Parts and Spares

Filter elements for the Y81K-630 power pack are the cheapest insurance in hydraulic maintenance. A blocked filter shows up as slow cycles and heat, and both shorten the life of everything downstream of it on the Y81K-630.

Every Y81K-630 ships with the maintenance schedule, lubrication chart and wiring diagrams in the documentation box. The same documents are reissued free of charge if they are lost on site on the Y81K-630. On the Y81K-630 that check appears in the maintenance schedule shipped with your build.

Frame, Cylinder and Power Pack Build

Weld inspection points for the Y81K-630 are marked on the drawing package, and the frame is welded by the same crew that builds our shear and shredder frames.

The Y81K-630 is built from plate up: frame fabrication, chamber machining and hydraulic assembly all happen in the same shop under one drawing package.

Customization and Optional Configurations

• Chamber size and bale cross-section matched to your buyer specification
• Motor rating and starting method matched to your local supply
• Control level: manual, semi-automatic or PLC automatic
• Diesel engine driven hydraulic power pack for off-grid sites
• Discharge type and bale tying method
• CE and other certifications for your market

The standard Y81K-630 build list is: chamber 3500×3000×1300 / 4000×3000×1300, 2×55 kW power pack, gantry-type heavy baler discharge, and the control level your crew will actually use. Each of those four lines is a separately priced option in the Y81K-630 quotation, so the machine you order is the machine the quotation describes.

Why Buy the Y81K-630 from HUAXIN

Every Y81K-630 is built to a drawing package that stays with the build record, which means repeat orders are identical machines.

The load test on the Y81K-630 is witnessed and documented, and the photographs are available to the buyer before shipment.

Quotations for the Y81K-630 are issued factory direct and itemized by configuration, so nothing is hidden inside a package price.

The Y81K-630 is sold on specification and itemization, which is why repeat buyers send the drawing package back to us. The Y81K-630 quotation lists every option separately so the comparison is on paper, not in conversation.

Honest Limits: When to Buy Something Else

If your plant runs unskilled crews, budget for operator training. The Y81K-630 is straightforward, but feed discipline is what delivers the quoted output.

Safety and Operating Discipline

Children, visitors and untrained staff are excluded from the Y81K-630 operating zone by rule, not by signage alone.

Operators of the Y81K-630 should be trained on the emergency stop positions before the first shift. Training takes an hour and is included with commissioning on the Y81K-630. On the Y81K-630 the operating zone is marked on the layout drawing issued with the quotation.

Footprint, Installation and Commissioning

Bale storage should be planned before the Y81K-630 is ordered. Stacked bales of the stated weight need rack or floor allowance; most sites underestimate bale staging space on the Y81K-630.

Plan the Y81K-630 footprint around charging side and bale discharge side, not just machine length. A gantry-type heavy baler arrangement needs clearance on the discharge face that small buildings often do not allow. On the Y81K-630 the drawing package states the dimensions your contractor needs.

Export Shipping, Packing and Documentation

Lead time for the Y81K-630 runs from deposit clearance. The confirmed date is written into the order, and any change is communicated with the reason, not after the fact on the Y81K-630.

The Y81K-630 is packed for export: critical surfaces oiled and covered, hoses capped, and the whole unit wrapped and strapped for container or flat-rack loading. The Y81K-630 documentation pack lists every document included with your build.

The Y81K-630 in the 630 Ton Scrap Metal Baler Lineup

As a 630 ton scrap metal baler, the Y81K-630 is built for Three-shift duty: 2×55 kW of installed power against a 3500×3000×1300 / 4000×3000×1300 chamber. Plants running three shifts with conveyor feeding are the typical buyers of this class, and the Y81K-630 answers them with 600×600 / 700×700 bales at 1200–1300 kg.

Ordering the Y81K-630 means ordering a 630 ton scrap metal baler around your material: heavy HMS, steel turnings, heavy section, continuous feed. On the Y81K-630 the chamber, bale cross-section, motor rating and control level are set from your intake at quotation, not fixed to a catalog configuration.

Every Y81K-630 quotation covers the 630 ton scrap metal baler platform: the 630 ton frame, 2×55 kW power pack, Three chamber configurations, and the control level your crew will actually use. The grades the Y81K-630 bales follow the trade specifications published by the Institute of Scrap Recycling Industries (ISRI), the standards body scrap is graded against in international trade.

Buyers comparing the Y81K-630 against a smaller press should weigh what the 630 ton scrap metal baler class adds: 2×55 kW of installed power against a 3500×3000×1300 / 4000×3000×1300 chamber, 600×600 / 700×700 bales at 1200–1300 kg, and a Three-shift duty rating that holds those figures across a full production day.

FAQ – Y81K-630 630 Ton Scrap Metal Baler

Which motor and power supply does the Y81K-630 use?

The Y81K-630 runs a 2×55 kW power pack built for 380 V, 400 V or 415 V at 50 Hz, or 60 Hz supply to order; a diesel-driven pack for the Y81K-630 is available where mains power is unavailable.

How is the bale discharged from the Y81K-630?

Discharge on the Y81K-630 is gantry-type heavy baler on the standard build, selected against your site layout and how bales leave the Y81K-630.

Is a diesel option available for the Y81K-630?

A diesel engine driven pack makes the Y81K-630 fully operational off grid, with the engine brand matched to your region and the Y81K-630 duty cycle.

How long is the lead time on the Y81K-630?

Standard Y81K-630 builds ship in 30 to 45 days after the deposit clears; non-standard Y81K-630 chamber or motor combinations run 60 to 75 days.

What warranty applies to the Y81K-630?

Frame, cylinders and hydraulic components of the Y81K-630 carry the warranty period stated in your contract, typically twelve months from commissioning; Y81K-630 wear parts are consumables.

What is the Y81K-630 price?

Request a Y81K-630 quotation and you receive a full itemized offer within two business days, factory direct.

What bale size does the Y81K-630 produce?

Standard bale cross-section on the Y81K-630 is 600×600 / 700×700, and the chamber configuration chosen at order fixes which of those sizes the Y81K-630 delivers.

What determines the real output of the Y81K-630?

The Y81K-630 is quoted against your stated material, not a catalog figure; bulk density and feed continuity decide the running rate, and the quotation states the figure for your material.

What chamber sizes are available on the Y81K-630?

Chamber options on the Y81K-630 include 3500×3000×1300 / 4000×3000×1300; the Y81K-630 configuration choice depends on your bale size requirement and daily tonnage.

What control options are available for the Y81K-630?

Manual, semi-automatic and PLC automatic control are quoted for the Y81K-630; on the Y81K-630 PLC is the usual choice where volume justifies lightly supervised running.

What certifications come with the Y81K-630?

CE marking is standard on the Y81K-630, and the manual, hydraulic schematics and the Y81K-630 test report ship with the machine.

How does installation and commissioning work for the Y81K-630?

We send a commissioning engineer for the Y81K-630: leveling, electrical connection, no-load and load runs, and operator training, with remote commissioning available on repeat Y81K-630 configurations.

Can the Y81K-630 be customized for a specific material?

Chamber size, bale size, motor rating, control level and discharge type on the Y81K-630 are all selected against your material and tonnage at order.

What materials can the Y81K-630 process?

The Y81K-630 is specified for heavy HMS, steel turnings, heavy section, continuous feed. Feed outside that list is quotable on the Y81K-630 as well — send a sample or analysis and we will confirm suitability in writing.

How much does a Y81K-630 bale weigh?

A Y81K-630 bale weighs 1200–1300 kg depending on material density and chamber size; the Y81K-630 quotation states the exact figure for your configuration.

Send your material analysis with the inquiry and the quotation for the Y81K-630 will state expected bale weight and output.

Other Equipment in the Line

Material that arrives oversize never reaches the Y81K-630 chamber in the first place; it is cut on a scrap metal shear or torn on a scrap metal shredder upstream, and the other bale sizes in this family are on the scrap metal baler index.