Inclined Shear

NS inclined shears: 630T–1,600T gravity-fed guillotine shears for 6–12 m rebar bundles, H-beams, pipes and UIC60 rails at 10–110 t/h. Factory-direct from HUAXIN.

NS Series Gravity-Fed Inclined Scrap Shear · 630T to 1600T

Inclined Shear (NS Series Gravity-Fed Guillotine Shear)

Instead of relying on a long horizontal rear pusher cylinder, the HUAXIN NS Series Inclined Scrap Metal Shear utilizes a heavy wear-lined angled gravity chute where long rebar bundles, structural H-beams, steel pipes, and railway rails slide directly into the guillotine throat under their own weight. Eliminating the rear pusher cylinder reduces foundation length while allowing crane loading and guillotine shearing to run continuously in parallel. See how gravity-fed troughs compare with horizontal and gantry units in our HUAXIN scrap metal shear machines overview.

  • 4 Dedicated Models: NS 630T, NS 1000T, NS 1250T & NS 1600T (630T - 1,570T Cutting Force)
  • Blade Width (mm / inch): 1,200 mm (47.2") & 1,400 mm (55.1") Four-Edge Reversible Blades
  • Gravity Chute Box: 8.0 × 2.4 × 3.5 m up to 10.0 × 2.6 × 3.7 m (Customizable)
  • PLC & Electrics: Mitsubishi PLC + Siemens Switchgear · Export HS Code 8462.3990

Showing all 4 results

  • Placeholder
    1000 Ton Inclined Scrap Metal Shear (NS 1000T) for Sale | HUAXIN

    When a 630-ton line cannot keep up with incoming trucks, the NS 1000T from HUAXIN is the next step: 1,000 metric tons (9,806 kN) of cutting force, a 1,200 mm (47.2″) guillotine blade, three 110 kW motors (330 kW / 442 HP total), and 25–50 tonnes per hour on long structural profiles, heavy pipe, and merchant bar. Uses the same space-saving 8.0 × 2.4 × 3.5 m inclined gravity-feed chute as the 630T, backed by a high-flow tri-motor hydraulic station. Mitsubishi PLC and Siemens electrics throughout.

  • Placeholder
    1250 Ton Inclined Scrap Metal Shear (NS 1250T) for Sale | HUAXIN

    The NS 1250T from HUAXIN is the heavy-profile model in the N-Series inclined range: 1,250 metric tons (12,258 kN) of shearing force, a widened 1,400 mm (55.1″) blade, and an extended 10.0 × 2.6 × 3.7 m (32.8 × 8.5 × 12.1 ft) gravity feeding box that swallows full-length H-beams, railway rails, and heavy-wall pipe without torch pre-cutting. Four 110 kW motors (440 kW / 590 HP) deliver 35–55 tonnes per hour for EAF steel-mill suppliers. Mitsubishi PLC, Siemens electrics, conveyor-ready.

  • Placeholder
    1600 Ton Inclined Scrap Metal Shear (NS 1600T) for Sale | HUAXIN

    The NS 1600T from HUAXIN is the flagship of the N-Series inclined range: 1,570 metric tons (15,396 kN) of rated cutting force, a 1,400 mm (55.1″) heavy guillotine blade, a 10.0 × 2.6 × 3.7 m (32.8 × 8.5 × 12.1 ft) gravity feeding box, and six 110 kW motors (660 kW / 885 HP) driving 60–110 tonnes per hour. Engineered as a continuous melt-shop preparation line for steel mills, shipbreaking terminals, and rail contractors. Mitsubishi PLC, Siemens electrics, outfeed conveyor system recommended.

  • Placeholder
    630 Ton Inclined Scrap Metal Shear (NS 630T) for Sale | HUAXIN

    The NS 630T is the entry point into continuous inclined shearing from HUAXIN: a 630-ton (6,178 kN) gravity-fed scrap metal shear with a 1,200 mm (47.2″) blade and a single 135 kW (180 HP) motor, cutting 10–20 tonnes per hour of rebar, light structural profiles, steel pipe, and merchant bar. No rear pusher cylinder, no deep foundation pit — scrap slides down the inclined gravity chute to the guillotine throat while the crane keeps loading. Equipped with Mitsubishi PLC, Siemens main electrics, and a feeding box and blade length built to your yard. Request a factory quote.

Custom Chute Dimensions & Outfeed Conveyors Available: Select any of our 4 NS Series Inclined Shear models above or review the factory specification matrix below. Contact HUAXIN for foundation drawings and direct factory quotes.

NS Series Inclined Shear Specification Matrix (630T–1,600T)

Model & Spec Page Cutting Force Blade Length (m / Inch) Feeding Box Size (L×W×H m) Main Motor Power Hourly Output (TPH)
NS 630T (630 Ton) 630T (6,178 kN) 1.2 m (47.2") 8.0 × 2.4 × 3.5 m 135 kW × 1 (180 HP) 10 - 20 t/h
NS 1000T (1000 Ton) 1,000T (9,807 kN) 1.2 m (47.2") 8.0 × 2.4 × 3.5 m 110 kW × 3 (330 kW / 442 HP) 25 - 50 t/h
NS 1250T (1250 Ton) 1,250T (12,258 kN) 1.4 m (55.1") 10.0 × 2.6 × 3.7 m 110 kW × 4 (440 kW / 590 HP) 35 - 55 t/h
NS 1600T (1600 Ton Class) 1,570T (15,396 kN) 1.4 m (55.1") 10.0 × 2.6 × 3.7 m 110 kW × 6 (660 kW / 885 HP) 60 - 110 t/h

OEM Replacement Blades, Wear Liners, Sub-Zero (-40°C) Packages & Customs HS Codes

In addition to brand-new turnkey machinery backed by a 12-month factory warranty, HUAXIN manufactures and exports direct-fit OEM replacement blades, wear plates, high-manganese castings, and hydraulic cylinder assemblies—including custom-machined replacement blades built to your exact engineering drawings or sample dimensions. Standard wear parts ship within 5 business days, and custom-forged orders ship within a maximum of 20 days.

Item / Component Category Export Customs HS Code Metallurgy & Engineering Options Lead Time & Pricing Factors
Complete Host Machine 8462.3990 Hydraulic Scrap Metal Shearing Machine (Gantry / Alligator / Container / Inclined / Side-Compression / Shear Baler) (CE & ISO9001 Certified, 100% New with Warranty) 30-55 Days · EXW / FOB Tianjin / CIF / CFR / DDP
Primary Cutting / Crushing Wear Parts 8208.1000 Four-Edge Reversible Shear Blades (M6V/H13/X45/D2 / 9CrSi / Forged H13 / SKD11) · Precision ground to ±0.02 mm tolerance 5 Days (Stock) / ≤20 Days (Custom) · Priced by steel grade, dimensions & order qty
Sub-Zero / Arctic Climate Package (-20°C to -40°C) 8208.1000 / 8412.2100 Deep cryogenic-treated impact blades (anti-fracture at -40°C), Parker low-temperature cylinder seals & oil tank heaters Custom engineered for Russia, Canada, Nordic & Northern US yards · Contact for Quote
Hydraulic Cylinders & Seal Kits 8412.2100 Forged 42CrMo piston rods with 0.06-0.08 mm hard chrome plating + genuine Parker / Hallite / NOK seal kits Seal Kits ≤5 Days / Cylinders ≤20 Days · Consolidated container or air express

How Spare Parts Pricing is Calculated: Replacement blade, hammer, liner, and cylinder prices depend on (1) alloy grade requirement (M6V/H13/X45/D2 vs. Forged H13 vs. Cryogenic Sub-Zero Grade), (2) exact drawing dimensions & bolt pattern, (3) ambient operating temperature (-20°C to -40°C Arctic toughness vs. +50°C desert cooling), and (4) trade terms (EXW, FOB, CIF, or bundled duty-free inside your new machine container). Send us your machine model or blade drawing for a same-day factory quote →

Frequently Asked Questions: NS Series Inclined Shears

1. When should a scrap yard choose an Inclined Shear over a horizontal Gantry Shear?
Choose an NS Series Inclined Shear when your incoming scrap consists heavily of long free-flowing structural steel (rebar bundles, pipes, rails, and H-beams from 6 to 12 meters long) where continuous gravity feeding eliminates waiting for a rear pusher cylinder to retract.
Exploring other hydraulic shearing capacities or feeding designs?Compare Inclined Shears vs. Horizontal & Gantry Scrap Metal Shears →