160 Ton Scrap Metal Baler Machine | Y81F-160 Hydraulic Baling Press

The Y81F-160 160 ton scrap metal baler is a compact, single-motor (22 kW) hydraulic turn-out baling press built for non-ferrous collection hubs, metal stamping workshops, and small scrap yards. It compresses aluminum extrusions, UBC beverage cans, copper wire, stainless offcuts, and thin steel sheet (1-4 mm (0.04-0.16″)) into dense 400×400 mm (16″×16″) furnace-ready bales weighing 100-200 kg at 1.5 to 2.8 tons per hour.

  • 160-Ton (1,600 kN) Compression Force: Three-ram hydraulic closure with replaceable Hardox 450 chamber wear plates.
  • Two Chamber Options: Choose 1600×1000×800 mm (63″×40″×32″) (standard) or 1600×1200×800 mm (63″×48″×32″) (wide mouth for bulky profiles).
  • Low 22 kW Power Draw: Runs on standard 380V/415V/440V 3-phase workshop grid power or an optional 35 hp diesel engine.
  • 90° Mechanical Turn-Out Discharge: Automatic side-flipping bale ejection on a flat concrete floor—no foundation pit required.

Factory-Direct from Huaxin Co., Ltd. (Est. 1989): CE & ISO 9001 certified. Send your scrap photos for an itemized FOB/CIF quote within 24 hours →

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

160 Ton Scrap Metal Baler for Sale (Y81F-160 Hydraulic Turn-Out Baling Press)

For non-ferrous dealers, window-profile extrusion plants, and small metal yards, loose scrap eats up floor space and kills trucking margins.

The Y81F-160 160 ton scrap metal baler solves that problem without requiring a high-voltage transformer or a sunken concrete pit. Powered by a single 22 kW hydraulic station operating at 25 MPa nominal pressure, this 160 ton hydraulic scrap metal baler for sale turns tangled stamping skeletons, aluminum window frames, copper tubing, and loose sheet steel into uniform 400×400 mm (16″×16″) blocks weighing 100 to 200 kg.

Unlike light vertical down-stroke cardboard presses that spring back on metal, the Y81F-160 uses a true three-stage horizontal box enclosure. First, the hinged top lid swings down to pre-crush springy extrusions and shearing offcuts. Next, the side cylinder squares the charge. Finally, the 160-ton (1,600 kN) main ram drives the metal against the reinforced end bulkhead, holding full pressure before the mechanical turn-out cradle flips the finished packet 90 degrees onto your forklift lane.

Which Scrap Operations Specify the 160-Ton Turn-Out Class?

  • Aluminum Extrusion & Stamping Workshops: Compressing 6063/6061 profile offcuts, radiator fins, and punch-press skeletons directly beside the production line.
  • Non-Ferrous Metal Traders: Densifying copper wire, brass turnings, stainless steel trim, and used beverage cans (UBC) to hit 20-24 metric tons inside a standard 20GP ocean container.
  • Growing Collection Yards (10-22 Tons/Day): Stepping up from manual sorting or a 125 Ton Scrap Metal Baler (Y81-125) when buyer contracts call for heavier 400×400 mm (16″×16″) cross-sections. If your daily intake exceeds 25 tons or requires octagonal furnace bales, compare the next model up: our 200 Ton Scrap Metal Baler (Y81F-200).

Technical Specifications – Y81F-160 Hydraulic Baling Press

Specification Parameter Y81F-160 (160T Class)
Model Designation Y81F-160
Main cylinder force 160 ton
Chamber size 1600×1000×800 / 1600×1200×800
Bale size 400×400
Bale weight 180-200 kg
Motor 22 kW
Duty rating Two-shift duty

Chamber Dimensions & Bale Weight Configurations (Y81F-160)

Compare the verified compression chamber dimensions (1,600×1,000×700 mm (63″×40″×28″) compression box) and bale cross-sections (350×350 mm (14″×14″) or 400×400 mm (16″×16″) bale section) for the 160 Ton Turn-Out Scrap Metal Baler (Y81F-160) below to match your crane loading span and smelter contract:

Chamber Dimensions (L×W×H mm) Bale Cross-Section (mm) Typical Bale Weight (kg)
1600×1000×800 400×400 100-180
1600×1200×800 400×400 100-200

Material Feed Suitability Matrix (Y81F-160)

Material Processing Notes & Suitability
Light steel offcuts Primary recommended feed for this tonnage class
Aluminum profiles bales cleanly at standard density
UBC aluminum cans standard duty, no configuration change needed
Copper wire and thin sheet bales well when the feed is steady

Mechanical Engineering, Hydraulic Circuit & Chamber Selection on the Y81F-160

Selecting between the two chamber widths comes down to how your crew feeds the box. The 1600×1000×800 mm (63″×40″×32″) chamber concentrates force over a narrower cross-section, cycling in 75 to 90 seconds on dense copper, brass, and stamping offcuts. The wider 1600×1200×800 mm (63″×48″×32″) box accepts wider sheet trimmings and tangled aluminum extrusions loaded by a small grapple or forklift tipping skip without manual pre-bending.

Structural Frame, Hardox Wear Lining & 22 kW Power Pack

Every Y81F-160 frame is fabricated at our 12,000 m² Tangshan plant from Q355B structural steel plate, with all stress-bearing butt welds inspected via ultrasonic flaw detection (JB/T 4730). Inside the pressing box, bolted Hardox 450 / NM450 wear liners protect the main walls from abrasive ferrous edges. Along the top lid opening, replaceable M6V, H13, X45, D2 alloy shear knives trim overhanging thin strips as the cover closes—preventing jams without manual torch cutting.

Because the hydraulic unit draws just 22 kW (approx. 42 Amps at 380V), most workshops connect the 160 ton scrap metal baler directly to an existing breaker panel. You can specify manual lever-valve control for variable yard scrap, or a Siemens S7-1200 PLC cabinet with one-button automatic cycling and wireless remote control for single-operator grapple loading.

Site Readiness, Container Shipping & Related Guides

The entire Y81F-160 ships fully assembled inside a single 20GP or 40HQ container. No civil excavation is needed: place the base frame on a level 200 mm (8″) concrete floor, fill the tank with 46# anti-wear hydraulic oil, connect three-phase power, and begin baling within four hours of unloading. For deeper guidance on chamber sizing and smelter acceptance standards, read our Scrap Metal Baler Bale Size Guide and How to Buy a Scrap Metal Baler from China.

Container Loading Math, Electrical Sizing & Preventive Maintenance (Y81F-160)

For non-ferrous exporters and stamping workshops, the financial payback of a 160-ton press is measured at the truck scale. Loose aluminum extrusions, window frames, and stamping skeletons typically bulk at 0.12 to 0.22 t/m³, meaning a 40HQ container struggles to load even 7 metric tons. After compression into 400×400 mm (16″×16″) blocks (100-200 kg each), bale density rises to 0.65-1.10 t/m³ depending on alloy—allowing two-tier palletized fork-loading to reach 20 to 24 metric tons in a single 20GP container.

Workshop Electrical Connection & Hydraulic Oil Care

  • Breaker & Cable Sizing: The 22 kW 3-phase motor draws roughly 42 A at 380V (or 38 A at 415V). A 63 A circuit breaker with 16 mm² copper supply cable handles full-load startup smoothly.
  • Hydraulic Tank & Filtration: Fill the reservoir with 46# anti-wear hydraulic oil (ISO VG 46) filtered to 15 microns. Replace the return-line cartridge filter after the first 250 operating hours and every 1,000 hours thereafter.
  • Liner & Knife Inspection: Check the M6V, H13, X45, D2 top-lid shear knife clearance (maintained at 0.5-1.0 mm (0.02-0.04″)) weekly and torque the countersunk Hardox 450 liner bolts monthly.

Frequently Asked Questions (FAQ) – Y81F-160

What scrap materials and maximum thickness can the Y81F-160 160 ton scrap metal baler handle?

The Y81F-160 is engineered for light ferrous sheet (up to 3-4 mm (0.12-0.16″) low-carbon steel), stamping skeletons, aluminum extrusions, UBC cans, copper wire, and stainless steel offcuts. For structural steel or plate thicker than 6 mm (0.24″), we recommend pairing it with a hydraulic shear or stepping up to our Y81K-315 heavy ferrous baler.

What is the real hourly output and cycle time of the Y81F-160?

A complete compression and turn-out cycle takes 80 to 100 seconds. Depending on bulk density and loading speed, the machine produces 35 to 45 bales per hour, corresponding to 1.5 to 2.8 tons per hour (12-22 tons per 8-hour shift).

Does the Y81F-160 require a concrete foundation pit or anchor bolts?

No pit is required. Because the side turn-out cradle ejects the 400×400 mm (16″×16″) bale above floor level, the Y81F-160 sits directly on a flat 200 mm (8″) reinforced concrete workshop floor.

Can the 160 ton scrap metal baler run on a diesel engine or 60 Hz power?

Yes. Standard electric builds are wound for your exact grid supply (220V/380V/415V/440V/480V at 50Hz or 60Hz). For off-grid yards, we mount a direct-coupled 35 hp Cummins or Weichai diesel engine in place of the electric motor.

How is the Y81F-160 shipped and what is the factory lead time?

The machine ships as a complete, factory-tested unit inside one standard ocean container. Standard voltage builds ship from Tianjin port within 25-35 days of deposit; custom voltage or diesel configurations ship in 40-50 days.

Production Standards, Utility Requirements & Related Reading (Y81F-160)

Engineered and assembled at Huaxin Co., Ltd. (est. 1989), the Y81F-160 is built for multi-shift scrap yard reliability, verified through ultrasonic plate inspection and live pre-shipment load testing. Engineered for 160T industrial duty with CE & ISO 9001 certification, foundation/electrical schematics, and 24h quotation turnaround.

Commercial & Technical Scope: Configured for operations comparing a 160 ton hydraulic scrap metal baler for sale, small yard aluminum extrusion and UBC can baler, 400x400mm (16″x16″) non-ferrous scrap baling press, 22 kW low-power hydraulic metal baler machine, side turn-out scrap metal baler price from China with full export documentation and engineer-led commissioning.

Related Technical & Line-Planning Guides

Request a Y81F-160 Factory Quotation & 2D Foundation Layout: Email Huaxin Co., Ltd. Sales Manager Leon Li at [email protected], message WhatsApp +86 159 0036 3543, or submit your feedstock details via our Contact Page to receive FOB/CIF pricing and 2D CAD drawings for the 160 Ton Turn-Out Scrap Metal Baler (Y81F-160) (1,600 kN (160 Metric Tons), 22 kW (30 HP)) within 24 hours.

Additional information

Machine Name

Hydraulic Scrap Metal Baler

Power

160 Ton

Model Number

Y81F-160

Feeding Tank

1600×1000×800 / 1600×1200×800 mm

Bale Size

400×400 mm

Bale Weight

180 to 200 kg per bale (estimated, varies with material)

Motor Power

22 kW

Control System

Manual, semi-auto & full PLC automatic

Application for

light steel offcuts, aluminum profiles, UBC cans, copper wire and thin sheet

Power Sources

Electric, 3-phase, 380V/50Hz, 400V/50Hz or 415V/50Hz (customized voltage available); diesel engine optional

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    OEM Replacement Blades, Wear Liners, Sub-Zero (-40°C) Packages & Customs HS Codes

    In addition to brand-new turnkey machinery backed by a 12-month factory warranty, HUAXIN manufactures and exports direct-fit OEM replacement blades, wear plates, high-manganese castings, and hydraulic cylinder assemblies—including custom-machined replacement blades built to your exact engineering drawings or sample dimensions. Standard wear parts ship within 5 business days, and custom-forged orders ship within a maximum of 20 days.

    Item / Component Category Export Customs HS Code Metallurgy & Engineering Options Lead Time & Pricing Factors
    Complete Host Machine 8462.6190 / 8479.8190 Hydraulic Scrap Metal Baling Press / Triple-Compression Metal Baler (CE & ISO9001 Certified, 100% New with Warranty) 30-55 Days · EXW / FOB Tianjin / CIF / CFR / DDP
    Primary Cutting / Crushing Wear Parts 8208.1000 / 7326.9019 Hardox 450 / Hardox 500 / NM500 Chamber Wear Liners & Lid Trim Blades · Precision ground to ±0.02 mm tolerance 5 Days (Stock) / ≤20 Days (Custom) · Priced by steel grade, dimensions & order qty
    Sub-Zero / Arctic Climate Package (-20°C to -40°C) 8208.1000 / 7326.9019 / 8412.2100 Deep cryogenic-treated impact blades (anti-fracture at -40°C), Parker low-temperature cylinder seals & oil tank heaters Custom engineered for Russia, Canada, Nordic & Northern US yards · Contact for Quote
    Hydraulic Cylinders & Seal Kits 8412.2100 Forged 42CrMo piston rods with 0.06-0.08 mm hard chrome plating + genuine Parker / Hallite / NOK seal kits Seal Kits ≤5 Days / Cylinders ≤20 Days · Consolidated container or air express

    How Spare Parts Pricing is Calculated: Replacement blade, hammer, liner, and cylinder prices depend on (1) alloy grade requirement (M6V/H13/X45/D2 vs. Forged H13 vs. Cryogenic Sub-Zero Grade), (2) exact drawing dimensions & bolt pattern, (3) ambient operating temperature (-20°C to -40°C Arctic toughness vs. +50°C desert cooling), and (4) trade terms (EXW, FOB, CIF, or bundled duty-free inside your new machine container). Send us your machine model or blade drawing for a same-day factory quote →

    Get Quote