315 Ton Scrap Metal Baler Machine | Y81K-315 Hydraulic Baling Press
The Y81K-315 315 ton scrap metal baler marks the entry into heavy ferrous side push-out (`Y81K`) baling for steel mills, structural scrap processors, and high-volume export yards. Driven by a 2×45 kW (90 kW) twin-pump hydraulic station and a huge 3000×2500×1200 mm (118″×98″×48″) or 3500×3000×1300 mm (138″×118″×51″) chamber, it compresses heavy mixed ferrous scrap, HMS 1 & 2, plate offcuts, and tangled turnings into 600×600 mm (24″×24″) or 700×700 mm (28″×28″) bales weighing 550-990 kg at 5 to 9 tons per hour.
- 315-Ton (3,150 kN) Heavy Ferrous Force: Engineered to plastically deform 6-10 mm (0.24-0.4″) steel scrap, pipe offcuts, and light structural sections.
- Massive 3.0m–3.5m Charging Box: Accepts full excavator grapple loads without hang-ups or manual pre-trimming.
- Side Push-Out (`Y81K`) Discharge: Dedicated hydraulic door and side-ejection ram push 1-ton bales onto a ramp or flat conveyor.
- 90 kW Dual-Motor Power Pack: Siemens PLC automatic control, wireless grapple remote, and Hardox 450/500 chamber armor.
Huaxin Co., Ltd. Factory Direct: CE & ISO 9001 certified. Get your Y81K-315 factory price & foundation drawing within 24 hours →
Why Choose Huaxin
- Real Factory, 30+ Years Manufacturing Experience
- 24/7 Technical Support
- Customized Solutions Available
- Installation & Training Support
Description
315 Ton Scrap Metal Baler for Sale (Y81K-315 Heavy Ferrous Side Push-Out Press)
At 315 tons of compression force and bale weights approaching one metric ton (550-990 kg), rotating a finished bale out of the box with a mechanical turn-out cradle is no longer practical.
That is why the Y81K-315 315 ton scrap metal baler shifts from our light-duty `Y81F` turn-out architecture to our heavy industrial `Y81K` side push-out design. After the main cylinder completes the final squeeze against a hydraulic sliding gate, the gate lifts vertically and the side cylinder pushes the 600×600 mm (24″×24″) or 700×700 mm (28″×28″) bale straight out the side discharge chute.
Look at the chamber dimensions on this 315 ton scrap metal baler for sale: the standard box measures 3000×2500×1200 mm (118″×98″×48″) (9.0 m³ volume), with an oversized 3500×3000×1300 mm (138″×118″×51″) (13.6 m³ volume) option available. That 2.5- to 3.0-meter width lets an operator in a cabbed material handler drop full orange-peel grapple bites of mixed HMS 1 & 2, plate trimmings, crushed car shells, and heavy turnings directly into the box without spilling scrap across the yard.
Which Operations Specify the Y81K-315 Heavy Ferrous Class?
- Heavy Ferrous Scrap Yards (40-75 Tons/Day): Yards upgrading from a 250 Ton Scrap Metal Baler (Y81F-250) because their incoming feed includes thicker 6-10 mm (0.24-0.4″) steel offcuts, pipe, and structural scrap.
- EAF Foundry & Steel Mill Feeders: Producing dense 600×600 mm (24″×24″) (550-850 kg) or 700×700 mm (28″×28″) (600-990 kg) furnace charge blocks that hold their shape during magnet-crane handling.
- When to Step Up: If your buyer requires 1,000 kg bales from heavier HMS or you want a twin-main-cylinder (400×2T) press, compare our 400 Ton Scrap Metal Baler (Y81K-400).
Technical Specifications – Y81K-315 Hydraulic Baling Press
| Specification Parameter | Y81K-315 (315T Class) |
|---|---|
| Model Designation | Y81K-315 |
| Main cylinder force | 315 ton |
| Chamber size | 3000×2500×1200 / 3500×3000×1300 |
| Bale size | 600×600 / 700×700 |
| Bale weight | 850-990 kg |
| Motor | 2×45 kW |
| Duty rating | two- to three-shift |
Chamber Dimensions & Bale Weight Configurations (Y81K-315)
Compare the verified compression chamber dimensions (2,500×1,600×1,000 mm (98″×63″×40″) to 3,000×2,000×1,100 mm (118″×79″×43″)) and bale cross-sections (500×500 mm (20″×20″) or 600×600 mm (24″×24″) bale section) for the 315 Ton Side Push-Out Scrap Metal Baler (Y81K-315) below to match your crane loading span and smelter contract:
| Chamber Dimensions (L×W×H mm) | Bale Cross-Section (mm) | Typical Bale Weight (kg) |
|---|---|---|
| 3000×2500×1200 | 600×600 | 550-850 |
| 3500×3000×1300 | 700×700 | 600-990 |
Material Feed Suitability Matrix (Y81K-315)
| Material | Processing Notes & Suitability |
| Heavy steel scrap | bales well when the feed is steady |
| HMS 1 & 2 | acceptable duty; density moves with bulk density |
| Section offcuts | well suited to standard and heavy-duty chamber configurations |
| Turnings | handled without pre-sorting when unmixed |
3.0-3.5 Meter Chamber Engineering, 90 kW Hydraulics & Wear Protection
Compressing 9 to 13 cubic meters of jagged ferrous scrap into a 600×600 mm (24″×24″) block places massive lateral loads on the press box walls. HUAXIN fabricates the Y81K-315 main frame from thick ultrasonic-tested Q355B structural plate reinforced with external box-section ribs. Every interior surface of the compression chamber and the sliding discharge door is lined with thick, bolted Hardox 450 / NM450 wear plates that can be rotated or replaced in the field without welding.
90 kW Twin-Motor Station & Lid Shear Blades
Two 45 kW motors (90 kW total) drive high-pressure axial piston pumps through a manifold of large-bore cartridge valves, preventing hydraulic shock during decompression. Heavy-duty M6V, H13, X45, D2 alloy shearing knives mounted along the 3.0- to 3.5-meter lid opening slice overhanging steel strips and light sections cleanly as the cover closes.
Why Side Push-Out (`Y81K`) Architecture Replaces Turn-Out Above 300 Tons
Once bale weights cross 600 to 990 kg and chamber dimensions reach 3000×2500×1200 mm (118″×98″×48″) or 3500×3000×1300 mm (138″×118″×51″), side push-out ejection (`Y81K` series) provides decisive structural and workflow advantages over turn-out cradles.
A vertical hydraulic sliding gate locks the end of the compression tunnel during the 3,150 kN main squeeze. When pressure releases, the gate lifts along machined guideways and the side cylinder pushes the finished 600×600 mm (24″×24″) or 700×700 mm (28″×28″) block straight out onto a steel discharge chute—allowing your crane magnet or forklift to clear three or four bales at once without interrupting the press cycle.
Civil Foundation, Power Pack & Maintenance Protocol
- Foundation Pad Design: Installs on a level reinforced concrete foundation with anchor pockets for the main frame and side-mount 90 kW hydraulic station.
- Hardox 450/500 Liner Rotation: Floor and side-wall wear plates are drilled to a symmetrical bolt pattern so high-wear lower plates can be swapped with upper plates during annual overhauls.
- Piston Rod Protection: Heavy steel shrouds shield the lid and gate cylinder rods from falling scrap during crane grapple charging.
Heavy Ferrous Entry: Managing Oversize Tramp Steel & Feeding Rhythm on the Y81K-315
The Y81K-315 315 ton scrap metal baler marks the transition into heavy-ferrous side push-out baling with 3.0-3.5 m chambers and lid shearing blades. To keep shift output at peak TPH and protect the Hardox-lined chamber across years of service, apply two operational rules from our factory commissioning team:
- Keep Heavy Solid Sections Out of the Baling Box: While the 315T lid shear blades cleanly slice overhanging 6-10 mm (0.24-0.4″) sheet metal and light profiles during lid closure, solid axles, thick I-beam crops, or cast iron blocks should be routed to a hydraulic gantry shear rather than buried inside a sheet bale.
- Matching PLC Auto-Cycle to Grapple Staging: Stage 2-3 grapple loads on the concrete apron beside the open press box while the Y81K-315 completes its automatic compression and side push-out stroke—cutting idle box-open waiting time by 40%.
Frequently Asked Questions (FAQ) – Y81K-315
Why does the Y81K-315 use side push-out discharge instead of turn-out discharge?
Bales from the Y81K-315 weigh between 550 and 990 kg. A hydraulic sliding door combined with side push-out ejection handles 1-ton bales smoothly with zero mechanical shock to the frame and allows direct discharge onto a slide ramp or flat conveyor.
Should I choose the 3000×2500×1200 mm (118″×98″×48″) or 3500×3000×1300 mm (138″×118″×51″) chamber?
Choose the 3000×2500×1200 mm (118″×98″×48″) chamber (600×600 mm (24″×24″) bale, 550-850 kg) for medium-heavy ferrous scrap, stamping skeletons, and 20GP export container loading. Choose the 3500×3000×1300 mm (138″×118″×51″) chamber (700×700 mm (28″×28″) bale, 600-990 kg) when feeding bulky demolition sheet, car shells, or long structural offcuts with a large grapple.
What foundation and electrical supply are needed for the Y81K-315?
Because of its 3.0-3.5 m chamber footprint and 315T force, the Y81K-315 mounts on a reinforced concrete foundation (drawings provided upon order). The 2×45 kW (90 kW) power pack runs on 380V/415V/440V/480V 3-phase power (minimum 125-160 kVA transformer capacity) or an optional diesel unit.
How is the Y81K-315 shipped overseas?
Due to the 3.0-3.5 meter wide chamber, the press disassembles into modular sub-assemblies (main frame, lid, cylinders, and hydraulic station) and ships in two standard 40HQ/40OT containers with full erection drawings and on-site commissioning support.
What is the warranty and spare blade availability?
All structural frames, cylinders, and hydraulic units carry a 12-month factory warranty. Replacement Hardox wear liners, M6V, H13, X45, D2 lid blades, and cylinder seal kits are stocked at our Tangshan works for 48-hour dispatch.
Engineering Verification, Power Planning & Reference Guides (Y81K-315)
Before any Y81K-315 hydraulic baling press leaves our Tangshan production base, our quality-control engineers verify all Q355B butt welds to JB/T 4730 standards and record a full-pressure shearing/compression test video for buyer sign-off. Engineered for 315T industrial duty with CE & ISO 9001 certification, foundation/electrical schematics, and 24h quotation turnaround.
Application & Procurement Keywords: Designed for processors evaluating a 315 ton scrap metal baler for sale, Y81K-315 heavy ferrous HMS 1 and 2 scrap baler, 3000x2500mm (118″x98″) large chamber hydraulic metal baling press, 90 kW twin-motor side push-out scrap steel baler, 600x600mm (24″x24″) and 700x700mm (28″x28″) furnace charge baler machine with direct factory technical support and stocked wear parts.
Related Technical & Line-Planning Guides
- Choosing Between 315T, 400T and 500T Heavy Scrap Metal Balers
- Scrap Metal Baler Bale Size Guide by Buyer Type
- Full category index: Hydraulic Scrap Metal Baler Machines (Y81 Series)
Request a Y81K-315 Factory Quotation & 2D Foundation Layout: Email Huaxin Co., Ltd. Sales Manager Leon Li at [email protected], message WhatsApp +86 159 0036 3543, or submit your feedstock details via our Contact Page to receive FOB/CIF pricing and 2D CAD drawings for the 315 Ton Side Push-Out Scrap Metal Baler (Y81K-315) (3,150 kN (315 Metric Tons), 2×37 kW or 2×45 kW (74–90 kW)) within 24 hours.
Additional information
| Machine Name | Hydraulic Scrap Metal Baler |
|---|---|
| Power | 315 Ton |
| Model Number | Y81K-315 |
| Feeding Tank | 3000×2500×1200 / 3500×3000×1300 mm |
| Bale Size | 600×600 / 700×700 mm |
| Bale Weight | 850 to 990 kg per bale (estimated, varies with material) |
| Motor Power | 2×45 kW |
| Control System | Manual, semi-auto & full PLC automatic |
| Application for | heavy steel scrap, HMS 1&2, section offcuts, turnings |
| Power Sources | Electric, 3-phase, 380V/50Hz, 400V/50Hz or 415V/50Hz (customized voltage available); diesel engine optional |








