1000 Ton Container Shear (HC1000) for Sale | HUAXIN

The HC1000 from HUAXIN is the large-format horizontal container shear: 1,000 metric tons (9,806 kN) of shearing force, a massive 2,000 mm (78.7″) feeding tank and blade, and an expanded 500 mm (19.7″) blade throat height — the first model in the range that takes full-width container sections and wide heavy panels without pre-cutting. Driven by four 55 kW motors (220 kW / 295 HP).

Why Choose Huaxin

  • Check Mark Real Factory, 30+ Years Manufacturing Experience
  • Check Mark 24/7 Technical Support
  • Check Mark Customized Solutions Available
  • Check Mark Installation & Training Support

Description

The Large-Format Box Shear: 2,000 mm Tank & 500 mm Throat Height

Every model below the HC1000—including the HC800 (1,600 mm)—is built around a 1,000, 1,400, or 1,600 mm chamber. The HC1000 container shear breaks into a new dimensional class: a full 2,000 mm (78.7″ / 6.56 ft) feeding tank width, a matching 2,000 mm guillotine blade, and an expanded 500 mm (19.7″) vertical blade throat height. Two full meters of chamber width transforms what a horizontal box shear can swallow—full-width ISO shipping container sidewalls and roofs, wide industrial boiler panels, and bulky structural assemblies that would require torch cutting before fitting into a 1,600 mm machine. Four 55 kW motors (220 kW / 295 HP total) and 1,000 metric tons (9,806 kN) of shearing force ensure the wider cut runs at full industrial speed.

Technical Specifications — HUAXIN HC1000 Container Shear

Specification Item HC1000 Parameter (Metric / Imperial)
Nominal Shearing Force 1,000 Metric Tons (9,806 kN / ~1,102 US Short Tons)
Feeding Tank Width 2,000 mm (78.7″ / 2.0 m) — tank length sized to your yard
Guillotine Blade Width 2,000 mm (78.7″ / 2.0 m)
Blade Throat Height 500 mm (19.7″ — upgraded from 400 mm on smaller models)
Installed Motor Power 55 kW × 4 units (220 kW / 295 HP total; available in equal or larger power)
Four-Edge Blade Steel M6V, H13, X45, D2 heavy-impact alloy tool steels
Control & Drive System PLC automatic control, hydraulic hold-down pre-compression + guillotine head

Who Buys the HC1000 — and What They Feed It

High-volume regional scrap yards, port container dismantling terminals, and shipbreaking support yards buy the HC1000 as much for the gas-cutting labor it eliminates as for the tonnage it shears:

  • Full-Size Containers, Tanks & Vehicles: ISO shipping container panels with corner posts and stiffeners, storage tank shells, commercial truck cabs, SUVs, and wide agricultural headers.
  • Heavy-Light Mixed Demolition & HMS: Wide structural frames, welded plate assemblies, heavy pipe bundles, HMS 1 & 2, and industrial stamping skeletons.
  • Downstream Line Pairing: Feeding pre-cut 2,000 mm scrap from the HC1000 into a downstream PSX-1200 Crusher or Y81K-1000 Baler keeps the downstream crusher or baler fed with pre-cut, uniform pieces.

Frequently Asked Questions — HC1000

What does the 500 mm (19.7″) blade throat height change in practice?
Vertical throat opening determines how thick a compressed slab can pass under the upper knife. Bulkier fabricated assemblies—such as container panels with welded ribs or crushed vehicle frames—need that extra 100 mm of vertical clearance (500 mm vs. 400 mm on the HC800) to feed smoothly without jamming against the hold-down clamp.

What electrical substation capacity is required for the 220 kW drive?
Four 55 kW motors (220 kW / 295 HP total) start sequentially via PLC control to prevent high inrush current. Send your transformer kVA rating and voltage with your RFQ so our electrical engineers can confirm the starter cabinet configuration.

Can the HC1000 take a whole shipping container?
No box shear takes a whole container. The HC1000 takes full-width container panels, sidewalls and roofs up to 2,000 mm (78.7″) wide without pre-cutting — the container is first cut into panels, then fed in.

HUAXIN has built industrial scrap shears since 1989 across three factories in China. Return to the container shear range — the HC800 sits below this model and the flagship HC1250 above it — or request a quotation with your largest piece and daily tonnage.

Get A Free Quote

    Your Name *

    Your Email *

    Your Phone / WhatsApp *

    Machine Application *

    Raw Material

    Output Rate per Hour


    Ton / Hour

    Power Supply

    Subject

    Message

    Get Quote